Integrated lasers and non-magnetic isolators for optical clock technologies
Closed Solicitation Posted
- Solicitation number
- SF24A-T004
- Agency
-
Air Force Research Laboratory
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Air Force Research Laboratory (AFRL-RV) solicited STTR Phase I proposals under DoD topic SF24A-T004 for an integrated laser and on-chip optical isolator for optical clock technologies, with proposals due February 21, 2024, a date that has passed. The set-aside is Total Small Business. The notice was posted November 29, 2023.
The objective is a photonically integrated laser natively at 778.1 nanometers, the rubidium two-photon transition frequency, with a linewidth under 10 kilohertz. The laser requires a non-magnetic or minimally magnetic on-chip optical isolator providing at least 30 decibels of isolation. The device must be fiber-coupled with at least 40 milliwatts out of a polarization-maintaining fiber and packaged in a standard enclosure such as a butterfly package with all electrical connections made. The notice is marked ITAR: No and falls under the Sensors technology area with Advanced Materials and Quantum Science focus areas.
The attached statement of objectives describes Phase I as initial design and simulation of the laser and isolator plus a mass-fabrication method for single-package integration at the foundry level. Phase II calls for at least two packaged prototypes with greater than 25 decibels polarization extinction ratio and integrated thermal control. Phase III emphasizes dual-use applications for next-generation optical and atomic clocks, with shock, vibration, acceleration sensitivity, and radiation tolerance testing.
The notice names no place of performance, period of performance, award value, incumbent, or evaluation criteria. The NAICS code is 541715, Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology), and the PSC is AC12, Applied Research.
Notice text
DoD STTR topic SF24A-T004
Component: USAF
Command: AFRL-RV
Phase: STTR Phase I
Technology Areas: Sensors
Focus Areas: Advanced Materials; Quantum Science
Keywords: <p>Laser; integrated photonics; optical clock; optical isolators</p>
ITAR: No
Objective:
Development of a low size, weight, and power photonically integrated laser system that includes a narrow linewidth (under 10 kilohertz) laser natively at 778.1 nanometers, specifically the rubidium two-photon transition frequency, and a non-magnetic or minimally magnetic on-chip optical isolator with at least 30 decibels of isolation. The device should be packaged in a standard enclosure such as a butterfly package with all electrical connections made, and fiber-coupled with at least 40 milliwatts out of a polarization-maintaining fiber.
Description:
Atomic clocks have seen a revolution in technology over the past decade as they have pushed towards chip-scale sizes, allowing them to be used in communications, navigation, and other defense-related technologies [1]. Future technologies such as clocks for "5G" networks and future Global Navigation Satellite System architectures could potentially incorporate more advanced clocks. Optical clocks such as the rubidium two-photon clock offers potential improvements over current chip scale clocks and surpass rubidium atomic frequency references [2]. One limiting factor in future, more advanced optical clocks is the development of the needed laser technology. Optical clocks require narrow linewidths down to kHz linewidths for the rubidium two photon optical clock, or even more narrow for other optical clocks such as strontium. These devices must be optically isolated to ensure the narrow linewidth and to avoid reflections causing unwanted lasing modes. Current systems typically employ a series of free space or fiber coupled components to achieve narrow linewidths and high optical power [2], but they can be susceptible to vibrations and shock. Furthermore, these systems typically have optical isolators with large magnetic fields, limiting the compactness of the device due to the effect of the magnetic field on the atoms. Recently, there have been advancements in each individual area such as narrow linewidth lasers [3, 4], on-chip non-magnetic isolators [5, 6], and new integration techniques [7]. The creation of such a device will not only enhance the manufacturability of the clock and lower the overall size, weight, and power, but it will also increase the environmental robustness to effects such as shock and vibration [8]. However, these devices have not been integrated into a single photonically integrated package. The DoD seeks the development of a photonically integrated circuit that includes a narrow linewidth laser and an on-chip non-magnetic optical isolator in a single package to serve the needs for next generation optical clocks.
Phase I:
Initial design and simulation of a sub-10 kilohertz linewidth laser at 778.1 nanometers, specifically the rubidium two-photon transition frequency, as well as a non-magnetic or minimally magnetic on-chip optical isolator with greater than 30 decibels of isolation and a fiber-coupled output greater than 40 milliwatts. Also a method for integrating the devices into a single package, either heterogeneous or hybrid integration, that allows for mass fabrication, ideally at the foundry level.
Phase II:
Packaged device with a sub-10 kilohertz linewidth laser at 778.1 nanometers, specifically the rubidium two-photon transition frequency, integrated with a non-magnetic or minimally magnetic on-chip isolator that provides at least 30 decibels of isolation, and fiber coupled. The means of integration should allow for mass fabrication, ideally at a foundry level. It should provide at least 40 milliwatts out of a polarization-maintaining fiber with greater than 25 decibels polarization extinction ratio. The packaging should contain all electrical connections and thermal control, and be mounted in a standard style enclosure, such as a butterfly package, with a polarization maintaining fiber out. At least 2 prototypes are expected to be delivered.
Phase III:
These devices will be extremely useful for a variety of applications such as next generation optical and atomic clocks, but will require further testing for shock and vibration, acceleration sensitivity, radiation tolerance, etc.
Files
| File | Type | Posted |
|---|---|---|
| SF24A-T004.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Wafer-scale low-loss hyperbolic optical material | Office of the Secretary of Defense | Total Small Business | |
| Optimally Packaged Assembly for Laser Systems (OPALS) | Air Force Materiel Command | Total Small Business | |
| Photonic-Crystal Surface Emitting Lasers (PCSELS) in the Near-Infrared (NIR) | Office of Naval Research | Total Small Business | |
| Low SWaP, 2-micron Fiber Amplifiers | Air Force Materiel Command | Total Small Business | |
| Robust and resilient optical modulators for extreme environment applications | Office of the Secretary of Defense | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity