Wafer-scale low-loss hyperbolic optical material
Open Pre-Solicitation Posted
- Solicitation number
- OSW27TZ02-NV001
- Agency
-
Office of the Secretary of Defense
Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Points of contact
-
- Jeffery Allen jeffery.allen.12@us.af.mil
- Monica Allen monica.allen.3@us.af.mil
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Office of the Secretary of Defense intends to solicit a DoD STTR Phase I research and development effort, topic OSW27TZ02-NV001, for wafer-scale, fabrication-ready thin films of a low-loss naturally hyperbolic optical material, with responses due January 6, 2027. The procurement is set aside as Total Small Business. The topic is coded NAICS 541715 and PSC AC12, and it is categorized under the RELIANCE 21 command with Electronics and Sensors technology areas and Advanced Materials, Microelectronics, and Quantum Sciences focus areas. Required films must operate from visible through telecommunication wavelengths and show high optical and crystalline quality with controlled thickness and orientation, on substrates at least one inch in cross-sectional diameter. Phase I establishes the feasibility of producing device-grade films with the required optical properties; the source text ends before the remaining Phase I requirements. The notice states the topic is not ITAR-controlled and requires CMMC Level 1. The source states that no commercial source of wafer-scale, low-loss hyperbolic material exists at visible and telecommunication wavelengths, and that the Air Force considers a domestic supply source important. The notice was posted November 4, 2026.
Notice text
DoD STTR topic OSW27TZ02-NV001
Component: OSD
Command: RELIANCE 21
Phase: STTR Phase I
Technology Areas: Electronics; Sensors
Focus Areas: Advanced Materials; Microelectronics; Quantum Sciences
Keywords: Hyperbolic materials; Subdiffractional optics; Integrated photonics; Nanolithography; Metrology; Quantum emitters; Wafer scale.
ITAR: No
CMMC: Level 1
Objective:
The overall goal of the R&D effort is to develop wafer-scale, fabrication-ready thin films of a low-loss naturally hyperbolic optical material that operates across the visible to telecommunication wavelength range. Films should be of high optical and crystalline quality, with controlled thickness and orientation, on substrates at least one inch in cross-sectional diameter.
Description:
Conventional optical systems are limited by diffraction, which sets the smallest features they can pattern, image, or confine to roughly the wavelength of the light used. A class of strongly anisotropic, or "hyperbolic," optical materials can confine and route light far below this limit, enabling a family of compact, low size-weight-and-power photonic components of direct interest to OUSW (R&E). Hyperbolic behavior has historically been realized in artificial metamaterials, which are optically lossy, and difficult to fabricate and scale. Certain naturally occurring crystals exhibit the same behavior with far lower loss, but the available examples operate only in the infrared and have been produced only as small, research-grade crystals by batch methods incompatible with standard microfabrication. There is presently no commercial source of wafer-scale, low-loss hyperbolic material that operates at visible and telecommunication wavelengths in a form compatible with standard semiconductor fabrication, and it is important for the Air Force to establish a domestic supply source for such a material.
Phase I:
Establish the feasibility of producing the hyperbolic material as wafer-scale, device-grade thin films with the required optical quality and crystalline orientation across the target wavelength range. Characterize and/or predict the optical performance of the films and benchmark it against existing artificial metamaterial approaches. Identify a viable approach for lithographically patterning and integrating the material.
As a Small Business Technology Transfer (STTR) effort, the work must be performed in partnership with a research institution; a partner with established expertise in optical measurement of hyperbolic materials is encouraged. Deliverables include a feasibility assessment with supporting analysis and/or preliminary data, quantitative performance projections, and a detailed Phase II plan. Documentation may comprise technical reports, peer-reviewed publications, measured data, and design artifacts sufficient to substantiate the scientific, technical, and commercial merit required to enter Phase II.
Phase II:
Deliver wafer-scale films/wafers (at least one inch in cross-section, with a demonstrated path to larger wafers) of the low-loss hyperbolic material, with controlled thickness, orientation, and uniformity, reproducibly and with reasonable yield. Demonstrate lithographic patterning and integration of the material. Provide quantitative performance data benchmarked against incumbent approaches, together with a manufacturing-readiness and transition plan.
Phase III:
The awardee will pursue commercialization of the technologies developed in Phase II, transitioning expanded capability to government and civilian users to microelectronics fabrication and inspection, compact optics and photonics, and/or quantum light sources. Direct access to end-users and government customers will be provided, with opportunities for Phase III awards for additional research and development or direct procurement of the products and services developed in coordination with the program. Phase III efforts are intended to transition technologies developed with further scaling of performance metrics for dual use applications into operational use and/or commercial markets, leveraging non-SBIR/STTR funding. Phase III work may include productization, integration, certification, and large-scale deployment of the capability developed in Phases I and II. By effectively executing Phase III effort and transitioning the technology into operational and commercial use, the project aims to maximize the impact and value of the STTR-funded R&D efforts, ultimately contributing to national security, economic growth, and technological innovation. A design for performance approach for defense system in partnership with a defense contractor and a design for cost for commercial applications will be planned.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Robust and resilient optical modulators for extreme environment applications | Office of the Secretary of Defense | Total Small Business | |
| Growth and Production of As2S3 Waveguides | Office of Naval Research | Total Small Business | |
| Domestic Manufacturing of Large Area Raman Laser Materials | Office of Naval Research | Total Small Business | |
| Photonic-Crystal Surface Emitting Lasers (PCSELS) in the Near-Infrared (NIR) | Office of Naval Research | Total Small Business | |
| Wideband Antenna for RF Photonics Modules | Air Force Materiel Command | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity