Insulation Removal for US Coast Guard Base Honolulu
Closed Solicitation Posted
- Solicitation number
- 52090PR240000243
- Agency
- Coast Guard Department of Homeland Security
- Responses due
- Set-aside
- Local Area Set-Aside
Opportunity facts
- NAICS code
- 238310 Drywall and Insulation Contractors
- Place of performance
- Honolulu, Hawaii 96819, United States
- Points of contact
-
- Adam Cervantes adam.r.cervantes@uscg.mil (206) 820-4863
- Eric Lentz eric.n.lentz@uscg.mil (808) 561-8647
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard is seeking quotes to fulfill a procurement requirement for the removal and replacement of insulation at their Base Honolulu location. The contractor must remove the existing interior insulation, which contains a layer of lead sheathing, and properly dispose of the materials. The contractor must then install new insulation, including a sound attenuation barrier and insulation boards, as well as replace up to 20% of the welded studs and caps, and weld all insulation mounting studs. The installation process is specified in detail. The award will be made to the lowest priced technically acceptable offer, and quotes are due by September 25, 2024.
This is a local area set-aside opportunity. The performance period is approximately November 10, 2024 to December 30, 2024, and the place of performance is Honolulu, HI 96819. The government has not provided any information about potential incumbents or the expected award value.
Notice text
Intro:
The US Coast Guard is seeking quotes to fulfill the following procurement requirement. If interested, please submit your companies quote to adam.r.cervantes@uscg.mil by the due date. Please reference the solicitation number / notice number in your email subject line.
RFQ Due Date:
09/25/2024
Approximate Period of Performance (POP):
11-10-2024 to 12-30-2024
Description:
Insulation Removal for Base Honolulu’s RBM 45 Boat
Scope:
Please see attached SOW for details. Contractor must remove the interior insulation and associated fastening hardware selected in Table 1.
The Contractor must dispose of all removed materials, in accordance with all applicable Federal, state, and local regulations.
The Contractor must install the new insulation in accordance with Coast Guard Drawing 45 RB-M 635-002 and SFLC Std Spec 0000.
The Contractor must renew the engine room insulation as attachment explains. The Contractor must provide all installation material and fasteners:
- Sound attenuation barrier: Pyrotek "Quadzero", P/N 17763007
- Hullboard: Owens Corning 2-inch Foil -Faced "Insul-Quick" insulation
The Contractor must replace up to 20 percent of the welded studs and caps.
The Contractor must weld all insulation mounting studs.
The Contractor must install the insulation as follows starting at the bulkhead/hull in the following sequence.
- Quadzero
- Insulation Speed Washer
- 2-inch Insul-Quick Hullboard
- Insulation Speed Washer
- Trim Pin (as required)
- Insulation Cap
- Tape all boundaries.
Equivalent Items:
Please submit equivalent items for acceptance prior to submitting proposal.
Reference SOW:
Please see attached Scope of Work (SOW)
Place of Performance / Delivery Location:
400 Sand Island PKWY, Honolulu, HI 96819
Completion Date:
Delivery Date:
Indicate the date when you believe you can realistically perform the services or get the item(s) delivered on island.
Credit Card Fee:
Indicate on the quote any credit card processing fee you would charge.
Award Criteria:
The award will be based upon the lowest price technically acceptable.
Local:
We highly desire a team with a local presence
Attachments
| File | Type | Posted |
|---|---|---|
| SOW insulation RB 45613.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity