INSPECTION SET, RESIDUAL STRESS-MLG and TEST SET, CAPTURE LOCK-MAIN LANDING GEAR
Closed Solicitation Posted
- Solicitation number
- N6833526Q1209
- Agency
-
Naval Air Warfare Center
Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 334519 Other Measuring and Controlling Device Manufacturing
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Navy Naval Air Systems Command Naval Air Warfare Center seeks manufacture and delivery of one Inspection Set, Residual Stress-MLG (part number 3867AS1630-1) and one Test Set, Capture Lock-Main Landing Gear (part number 3867AS1635-1) in support of the F/A-18 E/F program, with proposals due October 5, 2026. This is a Total Small Business set-aside procurement.
Place of performance is NAVAIR Lakehurst, New Jersey. Delivery is required within 100 days of contract award. All items must be new equipment only, covered by manufacturer's warranty, and shipped FOB Origin.
Offerors must qualify as small businesses under NAICS 334519 and must demonstrate exact part numbers and quantities in their quotes. All personnel and the prime contractor must hold current CMMC Level 2 certification and maintain a current NIST SP 800-171 assessment in the Supplier Performance Risk System. Access to the Statement of Work and technical specifications requires a valid, current DD Form 2345 signed by US and Canadian officials; requests must be submitted by September 16, 2026 at 10 AM EST. Export-controlled documentation compliance is required.
Proposals must include certified cost and pricing data meeting or exceeding the $2,000,000 threshold under FAR 15.403-4, a Certificate of Current Cost or Pricing Data, a completed DFARS 252.215-7009 checklist, detailed Basis of Estimate including labor hours and rates by category, material costs, subcontractor fees, overhead, and other direct costs. For major subcontracts exceeding $2,000,000, contractors must provide completed cost and pricing analysis. Proposals lacking sufficient supporting data risk rejection or delay.
Award will be made to the lowest price technically acceptable offeror. All offerors must be registered and active in SAM at time of award, with bids valid for 60 calendar days. The contract vehicle is a Fixed-Price Purchase Order through the PIEE solicitation module, with the government retaining ownership of all technical data.
Notice text
This effort is for the manufacture and delivery of quantity one (1) of INSPECTION SET, RESIDUAL STRESS-MLG, one (1) TEST SET, CAPTURE LOCK-MAIN LANDING GEAR as indicated in the table listed in the Statement of Work (SOW) and the CLIN Structure Attachment of this solicitation. This procurement is in support of the F/A-18 E/F program.
In accordance with the attachments in this solicitation, the submitted proposal must be accompanied by all supporting data and facts used to develop the proposal that are accurate, current, and complete to allow Government evaluators to make their independent assessments.
Written rationale is requested to define calculations and assumptions made when preparing the proposal.
Please provide actuals and any other information that supports the proposed cost elements for each task, Basis of Estimate (BOE).
The proposal should include all labor hours and rates proposed by labor category, as well as material, subcontractors, overhead and other direct costs that the Contractor expects to incur in this effort.
A proposal received without sufficient supporting data and rationale, such as inadequate cost/pricing data, will delay the procurement award and/or will result in the proposal being rejected by the Procuring Contract Officer.
The Contractor and any subcontractors must provide certified cost and pricing data in accordance with FAR 15.403-4 that meet or exceed the $2,000,000 threshold. In accordance with FAR 15.406-2, a Certificate of Current Cost or Pricing Data is required from the Contractor any subcontractors, certifying that the cost or pricing data submitted in support of the proposal are current, accurate, and complete. The Contractor shall complete and provide the checklist in accordance with DFARs 252.215-7009 identifying whether each of the criteria are met and provide a copy with the submission of the proposal. For major subcontracts over $2,000,000, please include a completed cost and pricing analysis in accordance with FAR 15.404-3(b).
In the event that the Contractor or any of its subcontractors have non-complying existing deficiencies, the Government requests that these deficiencies be reported to the PCO as soon as they are known.
**Instructions for submitting the DD2345 and details applicable to the evaluation criteria are included in the Buy Terms attached in this solicitation.**
**Please submit all proposals no later than 05 October 2026 to Molly Jackson (molly.s.jackson.civ@us.navy.mil)**
Files
| File | Type | Posted |
|---|---|---|
| Buy Terms for PMT 0907.docx | DOCX document | |
| CLIN Structure for PMT 0907.xlsx | XLSX spreadsheet | |
| SOW for PMT 0907 - MLG_NLG_NOLA.docx | DOCX document | |
| Evaluation Plan for PMT 0907 - signed.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| Inspection set, residual stress-MLG & test set, capture lock-main landing gear | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| MATS Functional Test Set (FMS) | Naval Air Warfare Center | Total Small Business | |
| MQ-4C NRP Strut Servicing Set | Naval Air Warfare Center | Total Small Business | |
| Test set subassembl | Naval Supply Systems Command | No set-aside | |
| HIGH LIFT ADAPTER ADU-954/E, Outriggers, Push Up Adapter | Naval Air Warfare Center | Total Small Business | |
| Pump-ctfgl | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity