Impact Resistant Urethane Resin - Black and Tan
Closed Solicitation Posted
- Solicitation number
- W911S225U1877
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 325211 Plastics Material and Resin Manufacturing
- PSC
- 9330 Plastics Fabricated Materials
- Place of performance
- Training Support Center - Tamika Craig5251 Smiley Court, Bldg 3020Fort Benning, GA 31905 31905
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum is procuring impact resistant urethane casting resins for military training aids and industrial applications. The solicitation requires three complete drum kits of black urethane casting resin (870 slow) and one complete kit of tan urethane casting resin, with each kit consisting of two 55-gallon drums (Part A and Part B). The resins must meet detailed technical specifications including a mix ratio of 100A:60B by weight, specific viscosity requirements, Shore D Hardness of 63, and an Izod Impact Resistance of 16.1 ft*lb/in. The materials must be compatible with any brand of mold release, and any resin that does not cure properly must be replaced by the vendor at no cost to the government. The solicitation was posted on August 29, 2025, with responses due by September 5, 2025, providing contractors with a tight seven-day response window.
This opportunity is designated as a Total Small Business set-aside, restricting competition to qualified small business entities. The delivery requirements specify a lead time of 30 days or less for the first two black kits, with the third black kit to be shipped 30 days after the initial shipment, creating a staggered delivery schedule. The tan kit delivery timeline follows the same technical requirements but with distinct color specifications. Performance will take place at Fort Moore, Georgia, indicating the materials will support military operations at this installation. The contract falls under NAICS code 325211 (Plastics Material and Resin Manufacturing) and PSC code 9330 (Plastics Fabricated Materials), targeting manufacturers with expertise in specialized urethane resin production. The solicitation does not specify award values or identify any incumbent contractors, focusing primarily on the technical requirements and delivery specifications for these specialized industrial materials.
Notice text
3 versions
Update #3 · Latest ·
Added three days because combined synopsis solicitation wasnt attached. 3 complete drum kits of 870 slow Black urethane casting resin and 1 complete drum kit of 870 slow Tan - These urethane kits are semi-rigid plastic with some flexibility that is strong and tough. Originally developed for high impact tooling, this product also offers abrasion and chemical resistance. It is ideal for a variety of industrial applications and fabrication of military training aids. Each of the three kits consists of two 55-gallon drums (Part A and Part B). The mixed resin is low in viscosity and does not require vacuum degassing. Technical Overview of the 3 870 slow black kits: Mix Ratio: 100A : 60B by weight; Mixed Viscosity cps.: 3,500 (ASTM D-2393); Specific Gravity, g/cc: 1.08 (ASTM D-1475); Specific Volume, cu. in./lb.: 26 (ASTM D-1475); Pot Life: 20 minutes @ 73 F / 23 C (ASTM D-2471); Handling Time: 4 hours @73 F / 23 C, depending on mass: Full Cure: 48 hours @ 73 F/23 C or 6 hours @150 F/60 C, depending on mass; Color: Black; Shore D Hardness: 63 (ASTM D-2240); Die C Tear Strength, pli: 488 (ASTM D-624); Ultimate Tensile, psi: 4,280 (ASTM D-638); Elongation @ Break: 400% (ASTM D-638); Shrinkage, in./in.: 0.001 (ASTM D-2566); Heat Distortion Temperature: 150 F / 60 C; Izod Impact Resistance (ft*lb/in): 16.1. Shipping with Lead Time of 30 days or less for the first 2 complete Black kits. The 1 remaining black kit shall be shipped 30 days after the first shipment of black kits. In addition to the Black kits, 1 complete kit of 870 slow Tan urethane casting resin 1 Tan kit consists of two 55-gallon drums (Part A and Part B). Technical Overview of the 1 kit of 870 slow Tan: Mix Ratio: 100A : 60B by weight; Mixed Viscosity cps.: 3,500 (ASTM D-2393); Specific Gravity, g/cc: 1.08 (ASTM D-1475); Specific Volume, cu. in./lb.: 26 (ASTM D-1475); Pot Life: 20 minutes @ 73 F / 23 C (ASTM D-2471); Handling Time: 4 hours @73 F / 23 C, depending on mass: Full Cure: 48 hours @ 73 F/23 C or 6 hours @150 F/60 C, depending on mass; Color: Tan; Shore D Hardness: 63 (ASTM D-2240); Die C Tear Strength, pli: 488 (ASTM D-624); Ultimate Tensile, psi: 4,280 (ASTM D-638); Elongation @ Break: 400% (ASTM D-638); Shrinkage, in./in.: 0.001 (ASTM D-2566); Heat Distortion Temperature: 150 F / 60 C; Izod Impact Resistance (ft*lb/in): 16.1. the 1 kit of Tan color shall be shipped in 30 days or less. All kits must be compatible with any brand of mold release. Material that does not cure properly must be replaced by the vendor at no cost to the government.
Update #2 ·
3 complete drum kits of 870 slow Black urethane casting resin and 1 complete drum kit of 870 slow Tan - These urethane kits are semi-rigid plastic with some flexibility that is strong and tough. Originally developed for high impact tooling, this product also offers abrasion and chemical resistance. It is ideal for a variety of industrial applications and fabrication of military training aids. Each of the three kits consists of two 55-gallon drums (Part A and Part B). The mixed resin is low in viscosity and does not require vacuum degassing. Technical Overview of the 3 870 slow black kits: Mix Ratio: 100A : 60B by weight; Mixed Viscosity cps.: 3,500 (ASTM D-2393); Specific Gravity, g/cc: 1.08 (ASTM D-1475); Specific Volume, cu. in./lb.: 26 (ASTM D-1475); Pot Life: 20 minutes @ 73 F / 23 C (ASTM D-2471); Handling Time: 4 hours @73 F / 23 C, depending on mass: Full Cure: 48 hours @ 73 F/23 C or 6 hours @150 F/60 C, depending on mass; Color: Black; Shore D Hardness: 63 (ASTM D-2240); Die C Tear Strength, pli: 488 (ASTM D-624); Ultimate Tensile, psi: 4,280 (ASTM D-638); Elongation @ Break: 400% (ASTM D-638); Shrinkage, in./in.: 0.001 (ASTM D-2566); Heat Distortion Temperature: 150 F / 60 C; Izod Impact Resistance (ft*lb/in): 16.1. Shipping with Lead Time of 30 days or less for the first 2 complete Black kits. The 1 remaining black kit shall be shipped 30 days after the first shipment of black kits. In addition to the Black kits, 1 complete kit of 870 slow Tan urethane casting resin 1 Tan kit consists of two 55-gallon drums (Part A and Part B). Technical Overview of the 1 kit of 870 slow Tan: Mix Ratio: 100A : 60B by weight; Mixed Viscosity cps.: 3,500 (ASTM D-2393); Specific Gravity, g/cc: 1.08 (ASTM D-1475); Specific Volume, cu. in./lb.: 26 (ASTM D-1475); Pot Life: 20 minutes @ 73 F / 23 C (ASTM D-2471); Handling Time: 4 hours @73 F / 23 C, depending on mass: Full Cure: 48 hours @ 73 F/23 C or 6 hours @150 F/60 C, depending on mass; Color: Tan; Shore D Hardness: 63 (ASTM D-2240); Die C Tear Strength, pli: 488 (ASTM D-624); Ultimate Tensile, psi: 4,280 (ASTM D-638); Elongation @ Break: 400% (ASTM D-638); Shrinkage, in./in.: 0.001 (ASTM D-2566); Heat Distortion Temperature: 150 F / 60 C; Izod Impact Resistance (ft*lb/in): 16.1. the 1 kit of Tan color shall be shipped in 30 days or less. All kits must be compatible with any brand of mold release. Material that does not cure properly must be replaced by the vendor at no cost to the government.
Update #1 ·
3 complete drum kits of Black urethane casting resin is a semi-rigid plastic with some flexibility that is strong and tough. Originally developed for high impact tooling, this product also offers abrasion and chemical resistance. It is ideal for a variety of industrial applications and fabrication of military training aids. Each of the three kits consists of two 55-gallon drums (Part A and Part B). The mixed resin is low in viscosity and does not require vacuum degassing. Technical Overview: Mix Ratio: 100A : 60B by weight; Mixed Viscosity cps.: 3,500 (ASTM D-2393); Specific Gravity, g/cc: 1.08 (ASTM D-1475); Specific Volume, cu. in./lb.: 26 (ASTM D-1475); Pot Life: 20 minutes @ 73 F / 23 C (ASTM D-2471); Handling Time: 4 hours @73 F / 23 C, depending on mass: Full Cure: 48 hours @ 73 F/23 C or 6 hours @150 F/60 C, depending on mass; Color: Black; Shore D Hardness: 63 (ASTM D-2240); Die C Tear Strength, pli: 488 (ASTM D-624); Ultimate Tensile, psi: 4,280 (ASTM D-638); Elongation @ Break: 400% (ASTM D-638); Shrinkage, in./in.: 0.001 (ASTM D-2566); Heat Distortion Temperature: 150 F / 60 C; Izod Impact Resistance (ft*lb/in): 16.1. Shipping with Lead Time of 30 days or less. Must be compatible with any brand of mold release. Material that does not cure properly must be replaced by the vendor at no cost to the government. 1 complete kit of Tan urethane casting resin, semi-rigid plastic with some flexibility that is strong and tough. Originally developed for high impact tooling, this product also offers abrasion and chemical resistance. It is ideal for a variety of industrial applications and military training aids. 1 Kit consists of two 55-gallon drums (Part A and Part B). The mixed resin is low in viscosity and does not require vacuum degassing. Technical Overview: Mix Ratio: 100A : 60B by weight; Mixed Viscosity cps.: 3,500 (ASTM D-2393); Specific Gravity, g/cc: 1.08 (ASTM D-1475); Specific Volume, cu. in./lb.: 26 (ASTM D-1475); Pot Life: 20 minutes @ 73 F / 23 C (ASTM D-2471); Handling Time: 4 hours @73 F / 23 C, depending on mass: Full Cure: 48 hours @ 73 F/23 C or 6 hours @150 F/60 C, depending on mass; Color: Tan; Shore D Hardness: 63 (ASTM D-2240); Die C Tear Strength, pli: 488 (ASTM D-624); Ultimate Tensile, psi: 4,280 (ASTM D-638); Elongation @ Break: 400% (ASTM D-638); Shrinkage, in./in.: 0.001 (ASTM D-2566); Heat Distortion Temperature: 150 F / 60 C; Izod Impact Resistance (ft*lb/in): 16.1. Shipping with Lead Time of 30 days or less. Must be compatible with any brand of mold release. Material that does not cure properly must be replaced by the vendor at no cost to the government.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Stone and Soil MBPA on Fort Drum | MICC Fort Drum | Total Small Business | |
| Coupling assembly | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity