High Pressure Air Compressor

The Department of the Air Force Materiel Command Air Force Sustainment Center at Tinker Air Force Base is soliciting quotes for the delivery, installation, and commissioning of one high-pressure air compressor system, specifically a Typhoon Series WP3100 24/7 continuous duty compressor or approved equivalent. The compressor must deliver a minimum of 110 standard cubic feet per minute (SCFM) of free air supply at 750 to 1,000 pounds per square inches (PSI) of pressure, operate on 460 VAC 3-phase 60 Hz electrical power, and be water-cooled compatible with existing chilled water systems maintained at 48 ± 2 degrees Fahrenheit. Key requirements include equipment dimensions not exceeding 60 inches wide by 108 inches long by 72 inches height and weight under 6,000 pounds to permit crane installation into a basement mechanical room without disassembling surrounding equipment. The contractor must be a factory-authorized distributor and parts supplier for the compressor system, with all electrical work complying with the National Electrical Code (NEC) and air piping complying with ASME B31.1 standards. Award will be made to the vendor submitting the lowest total evaluated price whose quotation conforms to all solicitation requirements, with evaluation based on four separately priced line items: the compressor unit itself, warranty coverage, mechanical installation materials and labor, and mechanical rigging services. The offer due date is April 3, 2026, at 12:00 PM local time, with delivery required by May 8, 2026.

This solicitation is designated as a 100% small business set-aside under NAICS code 333912 (Air and Gas Compressor Manufacturing) with a size standard of 1,000 employees. No incumbent contractor or current supplier is identified in the solicitation documents. The compressor must include a lifetime warranty, and the contractor must complete all delivery, installation, performance verification, and training within 10 business days of delivery. The contractor is responsible for all equipment offloading, transportation through the mechanical room, electrical connections to the existing disconnect switch, and piping connections to the building's air system and cooling water supply; notably, no forklift is available due to space constraints and the contractor must supply all labor and equipment for these tasks. All work must be performed Monday through Friday from 6:00 am to 1:00 pm, excluding federal holidays and base closures, and the contractor must comply with extensive Tinker Air Force Base requirements including FOD/DOP training, hazardous materials management, and environmental protection protocols. The place of performance is Tinker Air Force Base, Oklahoma City, Oklahoma, with delivery to Building 3001, and the solicitation incorporates FAR and DFARS clauses applicable to commercial item procurement including buy American requirements and small business certifications.