C26-015 High Pressure Air Compressor - Item Description_v3_Redacted.pdf
PDF 179 KB Posted
- Attached to
- High Pressure Air Compressor
- Solicitation number
- FA812526Q0036
About this file
This is a Memorandum for Record from the Department of the Air Force Headquarters Air Force Sustainment Center at Tinker Air Force Base dated 16 January 2026, documenting item description and specifications for procurement C26-015.
The 76th Combat Maintenance Group is requesting purchase of one Typhoon Series WP3100 24/7 Continuous Duty High-Pressure Air Compressor or similar equivalent. The compressor must be rated for continuous duty and deliver a minimum of 110 Standard Cubic Feet per Minute (SCFM) of free air supply at 750 to 1000 PSI, with configurable regulation at 750 PSI output pressure. The unit must operate on 460 VAC 3-phase 60 Hz electrical power and be water-cooled to integrate with the existing chilled water system. Physical constraints require dimensions not exceeding 60 inches wide by 108 inches long by 72 inches height, with weight under 6,000 pounds to allow installation via crane without disassembling surrounding mechanical equipment. The controller must support Modbus TCP communication with the contractor required to supply a complete list of Modbus registers and their designations. The compressor must include a lifetime warranty and the contractor is responsible for delivery, installation, electrical and piping connections to existing utilities per the Statement of Work Section 3.2, as well as startup, commissioning, and training by a qualified technician. The equipment shall be shipped to Tinker AFB, 73145.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
16 January 2026
MEMORANDUM FOR RECORD
SUBJECT: Item Description, C26-015 High Pressure Air Compressor
1. The 76th CMXG is requesting utilization of funds for the purchase of High-Pressure Air Compressor.
2. The requested equipment item descriptions/specifications are outlined below.
a. Item one – High-Pressure Air Compressor
(1) Typhoon Series, WP3100 - 24/7 Continuous Duty Compressor or similar
(2) Quantity: (1)
(3) Must be rated for continuous duty.
(4) Must provide minimum of 110 Standard Cubic Feet / Minute (SCFM) free air supply @ 750 to 1000 Pounds per square inches (PSI) of pressure when utilized for
(5) Must be configurable to regulate at 750 PSI output pressure.
(6) Must operate using 460 VAC 3 phase 60 Hz electrical power
(7) Must be a water-cooled unit that will work with existing chilled water system.
(8) Must be no larger than 60” wide by 108” long by 72” height.
(9) Must weigh less than 6,000 pounds.
(10)Dimensions and weight must be such that the installation crew can lower the machine by crane, move into place, and install the equipment at the designated site in the without having to move or disassemble any major mechanical equipment in the surrounding area.
(11) Controller must be capable of communicating via Modbus TCP.
(12) Contractor must supply a list of Modbus registers and what they are/represent.
(13) Must include lifetime warranty
(14) Contractor must deliver, move, and install the compressor in the in the location specified by the government, and provide necessary electrical and piping equipment to connect to existing electrical, air, and cooling water utilities. In accordance with the Statement of Work, Section 3.2.
(15) Contractor must provide startup and commissioning and training by a qualified technician.
3. Shipping Instructions – Compressor shall be shipped to: , , Tinker
AFB, 73145
File details come from the government source that posted it. Updated .