High Dynamic Range Camera for High Energy Laser Fine Tracking

Closed Solicitation Posted

Solicitation number
A19-086
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A19-086

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Electronics

Keywords: short wave infrared sensor; low noise sensor; high dynamic range sensor; gated sensor

Objective:

To develop a low noise and high dynamic range short wave infrared camera for active illumination fine tracking in High Energy Laser (HEL) systems.

Description:

A primary limitation of active illumination imaging is the limited dynamic range of the sensor. This problem is made worse during HEL engagements due to object heating resulting in reduced track fidelity and challenges with maintaining a consistent aimpoint. To compound these challenges the camera solution must also be very sensitive and low noise to minimize the requirements on the illumination laser. Sensors commercially available today do not meet sensor requirements necessary to support HEL fine track capabilities. • Dynamic Range: Threshold: 16 bit; Objective: > 16 bit • Frame Rate: Threshold: 1 kHz; Objective: 5 kHz • Array Size: Threshold: 128x128; Objective: 512x512 • Wavelength Band: 1500 nm – 1700 nm • Time Gate Width: Threshold: Continuous integration; Objective: 10 ns

Phase I:

The phase I effort shall include analysis and design of the proposed sensor. The analysis shall provide confidence that the proposed concept design will be successful in meeting the specifications. Dynamic range, electron noise, frame rate, array size, and gate width expectations shall be addressed in the Phase I effort.

Phase II:

During phase II, the phase I designs shall be utilized to fabricate, test and evaluate a short wave sensor. Key performance parameters shall be demonstrated during the phase II effort.

Phase III:

During phase III, the contractor will work with the government to integrate the SWIR camera into one of the Army’s high energy laser demonstrators or test beds for evaluation in a fine track system with an illuminator laser.

Files

File Type Posted
A19-086.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors