A19-086.pdf

PDF 49 KB Posted

Attached to
High Dynamic Range Camera for High Energy Laser Fine Tracking
Solicitation number
A19-086
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

A19-086: High Dynamic Range Camera for High Energy Laser Fine Tracking

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Electronics

MODERNIZATION PRIORITIES:

KEYWORDS:

short wave infrared sensor, low noise sensor, high dynamic range sensor, gated sensor

ADDITIONAL INFORMATION

OBJECTIVE:

To develop a low noise and high dynamic range short wave infrared camera for active illumination fine tracking in High Energy Laser (HEL) systems.

DESCRIPTION:

A primary limitation of active illumination imaging is the limited dynamic range of the sensor. This problem is made worse during HEL engagements due to object heating resulting in reduced track fidelity and challenges with maintaining a consistent aimpoint. To compound these challenges the camera solution must also be very sensitive and low noise to minimize the requirements on the illumination laser. Sensors commercially available today do not meet sensor requirements necessary to support HEL fine track capabilities. • Dynamic Range:

Threshold: 16 bit; Objective: > 16 bit • Frame Rate: Threshold: 1 kHz; Objective: 5 kHz • Array Size: Threshold:

128x128; Objective: 512x512 • Wavelength Band: 1500 nm – 1700 nm • Time Gate Width: Threshold: Continuous integration; Objective: 10 ns

PHASE I:

The phase I effort shall include analysis and design of the proposed sensor. The analysis shall provide confidence that the proposed concept design will be successful in meeting the specifications. Dynamic range, electron noise, frame rate, array size, and gate width expectations shall be addressed in the Phase I effort.

PHASE II:

During phase II, the phase I designs shall be utilized to fabricate, test and evaluate a short wave sensor. Key performance parameters shall be demonstrated during the phase II effort.

PHASE III DUAL USE APPLICATIONS:

During phase III, the contractor will work with the government to integrate the SWIR camera into one of the Army’s high energy laser demonstrators or test beds for evaluation in a fine track system with an illuminator laser.

REFERENCES:

“Influence of gating and of the gate shape on the penetration capacity of range-gated active imaging in 1.

scattering environments”, Frank Christnacher, Stéphane Schertzer, Nicolas Metzger, Emmanuel Bacher, Martin Laurenzis, and René Habermacher, Optics Express, Vol. 23, Issue 26, pp. 32897-32908, (2015) “Very wide dynamic range SWIR sensors for very low background applications”, Robert F. Cannata; Randal J. Hansen; Adrienne N. Costello; William J. Parrish, Proceedings Volume 3698, Infrared Technology and Applications XXV; 26 July 1999

2.

“A low-noise laser-gated imaging system for long-range target identification”, Ian M. Baker; Stuart S.

Duncan; Jeremy W. Copley, Proceedings Volume 5406, Infrared Technology and Applications XXX; 30 August

3.

“Large-format InGaAs focal plane arrays for SWIR imaging”, Andrew D. Hood; Michael H. MacDougal; Juan Manzo; David Follman; Jonathan C. Geske, Proceedings Volume 8353, Infrared Technology and Applications XXXVIII; 83530A, 31 May 2012

4.

“High speed short wave infrared (SWIR) imaging and range gating cameras”, Douglas Malchow; Jesse Battaglia; Robert Brubaker; Martin Ettenberg, Proceedings Volume 6541, Thermosense XXIX; 654106, 9 April

5.

“Large format short-wave infrared (SWIR) focal plane array (FPA) with extremely low noise and high dynamic range”, David Acton; Michael Jack; Todd Sessler, Proceedings Volume 7298, Infrared Technology and Applications XXXV; 72983E, 6 May 2009

6.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .