Hahn & Clay Pressure Tank Lid Repair
Closed Solicitation Posted
- Solicitation number
- N6660425Q0052
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334515 Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Place of performance
- 02841, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Navy Naval Sea Systems Command (NAVSEA) is seeking evaluation and repair services for a Hahn & Clay pressure tank lid (model 4000-60-144) that is currently experiencing water leakage at 1500-2000 PSIG pressure levels and requires restoration to its original 4000 PSI capability. This procurement is structured as an Indefinite Delivery/Indefinite Quantity contract with three Contract Line Item Numbers covering evaluation, repairs, and data requirements, processed under FAR Part 13 Simplified Acquisition Procedures with NAICS code 334515 for instrument manufacturing. Contractors must possess ASME R-Stamp certification and demonstrate acceptable past performance in the System for Award Management (SAM) Performance Rating System. The evaluation will be conducted on a Lowest Price Technically Acceptable basis, with technical acceptability determined by proof of ASME R-Stamp certification, completed pricing tables, detailed repair plan submission, and acceptable past performance records. Quotes must be submitted electronically to Hannah.l.murphy7.civ@us.navy.mil by June 27, 2025, and site visits are strongly encouraged prior to quote submission.
This solicitation is designated as unrestricted with no set-aside provisions and targets businesses with 750 or fewer employees under the specified NAICS code. No incumbent contractors are identified in the solicitation materials, and specific award values or budget ranges are not disclosed in the available documentation. The contract includes a 12-month period of performance from award date, with work to be performed both at the contractor's facility for lid repair and at the Naval Undersea Warfare Center Division Newport in Rhode Island for installation and final testing. The place of performance is Newport, Rhode Island 02841, where the pressure tank is used for Virginia Class Non-Propulsion Electronic Systems Environment Testing, supporting over 10,000 hours of environmental qualification testing annually. The procurement requires compliance with National Board Inspection Code and ASME Section VIII standards, with deliverables including Factory Acceptance Testing procedures, test reports, and certificates of compliance.
Notice text
6 versions
Update #6 · Latest ·
The purpose of this amendment 0005 is to revise quote submission requirements. The following requirements are revised in result of this amendment.
BASIS OF AWARD:
The Basis of Award is revised:
From:
The Government will evaluate quotes on a Lowest Price Technically Acceptable (LPTA) basis. In order to be determined technically acceptable, Offerors shall: 1. Provide proof of ASME R-Stamp awarded by The National Board of Boiler and Pressure Vessel Inspectors (NBBI) to show NBIC qualifications. 2. Complete and submit Pricing Tables as part of its quote submission. 3. Submit findings and detailed plan for the hypothetical repair. 4. The Government will consider past performance information within Supplier Performance Risk System (SPRS) whereby negative information may render a quote being deemed technically unacceptable.
To:
The Government intends to make a single award as a result of this solicitation. Award will be made to the responsible Offeror meeting all requirements of the solicitation and whose quote contains the combination of those factors offering the best overall value to the Government. The best overall value to the Government will be determined by comparing the difference in value of technical (non-cost) features of quotes with the difference in the cost to the Government.
The following indicates the factors that will be considered for award:
Pass/Fail
Technical Approach
Hypothetical Approach
Price
1. Pass/Fail:
The contractor shall submit proof of ASME R-Stamp awarded by The National Board of Boiler and Pressure Vessel Inspectors (NBBI) to show NBIC qualifications.
2. Technical Approach:
The contractors shall:
- Complete and submit Pricing Tables as part of its quote submission.
- Submit findings and detailed plan for the hypothetical repair.
3. Hypothetical Task Approach:
Contractors shall submit a hypothetical approach for the following hypothetical tasks:
- If the mating surface for the lid within the tank needed to be resurfaced to bring the tolerance back within specification, what would be the proposed plan to accomplish this?
- If the sealing ring attached to the lid needed to be repaired or remade, what would the proposed plan be to accomplish this?
- What would be the proposed plan to ensure that the sealing ring and mating surface are within tolerance to return the pressure vessel back to its original 4000 PSI maximum working pressure.
The page limit for submittal of the Hypothetical Task Approach for all 3 scenarios is 2 pages total.
Additionally, the Government will consider past performance information within Supplier Performance Risk System (SPRS) whereby negative information may render a quote being deemed technically unacceptable.
All other terms and conditions remain unchanged.
The purpose of amendment 0004 is to extend the required response date to 14 March 2025 at 2PM EST.
The purpose of amendment 0003 is to extend the required response date to 3 March 2025 at 2PM EST and to publicize a question and answer asked by industry
Question: Please clairify - 4.1.1 of the SOW seems to state that the quote for the repair cost to the lid would occur after the contract is awarded and possibly after sending the lid to us for evaluation. However, the pricing instruction document seems to say that a not-to-exceed price is due at time of quote.
Answer: The Government is requesting a worst case estimate as a not-to-exceed price for repair of the tank lid. This not-to-exceed price will be used to establish contract ceiling. Firm Fixed Pricing for the repairs will be requested after award and after evaluation has taken place.
The purpose of amendment 0002 is to add ASME code A-1 documents as attachments 26-27 and to extend the required response date to 7 February 2025 at 2 PM EST
The purpose of amendment 0001 is to add additional pictures of the tank lid as attachments 23-25, and to extend required response date to 31 January 2025 at 2:00 PM EST.
Services for the evaluation and repair of Hahn & Clay pressure tank 4000-60-144 as detailded in Solicitation N66660425Q0052 provided as an attachment to this notice.
Update #5 ·
The purpose of amendment 0004 is to extend the required response date to 14 March 2025 at 2PM EST.
The purpose of amendment 0003 is to extend the required response date to 3 March 2025 at 2PM EST and to publicize a question and answer asked by industry
Question: Please clairify - 4.1.1 of the SOW seems to state that the quote for the repair cost to the lid would occur after the contract is awarded and possibly after sending the lid to us for evaluation. However, the pricing instruction document seems to say that a not-to-exceed price is due at time of quote.
Answer: The Government is requesting a worst case estimate as a not-to-exceed price for repair of the tank lid. This not-to-exceed price will be used to establish contract ceiling. Firm Fixed Pricing for the repairs will be requested after award and after evaluation has taken place.
The purpose of amendment 0002 is to add ASME code A-1 documents as attachments 26-27 and to extend the required response date to 7 February 2025 at 2 PM EST
The purpose of amendment 0001 is to add additional pictures of the tank lid as attachments 23-25, and to extend required response date to 31 January 2025 at 2:00 PM EST.
Services for the evaluation and repair of Hahn & Clay pressure tank 4000-60-144 as detailded in Solicitation N66660425Q0052 provided as an attachment to this notice.
Update #4 ·
The purpose of amendment 0003 is to extend the required response date to 3 March 2025 at 2PM EST and to publicize a question and answer asked by industry
Question: Please clairify - 4.1.1 of the SOW seems to state that the quote for the repair cost to the lid would occur after the contract is awarded and possibly after sending the lid to us for evaluation. However, the pricing instruction document seems to say that a not-to-exceed price is due at time of quote.
Answer: The Government is requesting a worst case estimate as a not-to-exceed price for repair of the tank lid. This not-to-exceed price will be used to establish contract ceiling. Firm Fixed Pricing for the repairs will be requested after award and after evaluation has taken place.
The purpose of amendment 0002 is to add ASME code A-1 documents as attachments 26-27 and to extend the required response date to 7 February 2025 at 2 PM EST
The purpose of amendment 0001 is to add additional pictures of the tank lid as attachments 23-25, and to extend required response date to 31 January 2025 at 2:00 PM EST.
Services for the evaluation and repair of Hahn & Clay pressure tank 4000-60-144 as detailded in Solicitation N66660425Q0052 provided as an attachment to this notice.
Update #3 ·
The purpose of amendment 0002 is to add ASME code A-1 documents as attachments 26-27 and to extend the required response date to 7 February 2025 at 2 PM EST
The purpose of amendment 0001 is to add additional pictures of the tank lid as attachments 23-25, and to extend required response date to 31 January 2025 at 2:00 PM EST.
Services for the evaluation and repair of Hahn & Clay pressure tank 4000-60-144 as detailded in Solicitation N66660425Q0052 provided as an attachment to this notice.
Update #2 ·
The purpose of amendment 0001 is to add additional pictures of the tank lid as attachments 23-25, and to extend required response date to 31 January 2025 at 2:00 PM EST.
Services for the evaluation and repair of Hahn & Clay pressure tank 4000-60-144 as detailded in Solicitation N66660425Q0052 provided as an attachment to this notice.
Update #1 ·
Services for the evaluation and repair of Hahn & Clay pressure tank 4000-60-144 as detailded in Solicitation N66660425Q0052 provided as an attachment to this notice.
Files
Show all 30
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Valve, relief, pressu | Naval Supply Systems Command | No set-aside | |
| Rupture disk assy, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Disk assembly, valve, in repair/modification of | Naval Supply Systems Command | No set-aside | |
| Parts kit, ball valv | Naval Supply Systems Command | Total Small Business | |
| GOV valve body assy | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity