Glca purchase sunshades

The National Park Service Intermountain Region seeks purchase and delivery of 35 unassembled sunshade structures with an optional additive of 5 additional units for Glen Canyon National Recreation Area, with quotes due September 4, 2026. This is a 100% Total Small Business Set-Aside under NAICS 321992 (Prefabricated Wood Building Manufacturing).

Place of performance is Page, Arizona 86040 (Wahweap Warehouse, 130 NPS Maintenance Road). Each sunshade shall be approximately 10 by 12 feet with a minimum height of 6 feet 5 inches on the shortest side, featuring primary wood construction using cedar or ground-contact pressure-treated lumber, 6-by-6-inch posts, doubled 2-by-6-inch beams, 2-by-6-inch rafters, and 1-by-6-inch knee braces. All fasteners and metal parts must be corrosion-resistant (galvanized or hot-dipped), with 5/8-inch carriage bolts at post-to-beam connections, structural-grade screws, and H10A hurricane ties at every rafter. The roof system consists of 26-gauge corrugated metal panels with gasketed washer screws, a minimum 5-degree slope and maximum 15-degree slope, and ultraviolet-resistant weatherproof coating in brown powder-coated finish. Kits must be unassembled but complete with all fasteners, pre-drilled, and ready for assembly with simple hand tools. All units must be delivered within 120 days of notice to proceed. Offerors must include a Buy American Certificate if applicable and be registered in SAM with an active status and valid UEI at quote submission, award, and throughout performance. Questions are due August 19, 2026 at 12 p.m. Mountain Time. Amendment 0001 (posted August 20) incorporated government responses to 28 questions and revised scope; offerors must acknowledge the amendment with their quote. Evaluation is based on price reasonableness and technical capability, with the government evaluating quotes in groups of three starting with the lowest-priced offers.