Fill Firewall Penetrations, Warehouses 16A, 16B, 17, 19 and 56

Contractor is to furnish all labor, management, supervision, tools, materials, equipment, and transportation to Fill Firewall Penetrations, Warehouses 16A, 16B, 17, 19 and 56 at DDJC with all the required components over the identified work areas. This project will consist of providing all labor, supervision, materials, tools, and equipment to Fill Firewall Penetrations, Warehouses 16A, 16B, 17, 19 and 56, DDJC Tracy site as defined in the scope of work.
This project is 100% Small Business Set Aside.
The following summary of work is for the purpose of general information and is not intended to include and describe every feature or item or to define the scope of work. It is expected that the contractor will visit the site of work and thoroughly familiarize him/herself with the conditions existing there. Failure on the part of the contractor to acquaint her/himself with the site conditions will not be sufficient reason for any increase in contract price.
PROJECT DESCRIPTION:
This project is required to fill the openings in the firewalls of Warehouses 16A, 16B, 17, 19 and 56 with reinforcing bars and concrete to match the fire rating of the existing firewalls.
The project includes the following work:
a. 8" dia. hole. Remove existing material and fill with concrete. Paint concrete to match
adjacent surfaces. (one location)
b. Steel sheet openings: Remove steel sheet openings, remove fire sprinkler piping for
openings and cap off ends with Schedule 40 fittings. Fill openings with reinforcing steel and concrete or shotcrete. Paint concrete to match adjacent surfaces. (eight locations)
c. Concrete tunnels: Remove fire sprinkler piping for tunnels and cap off piping with
Schedule 40 fittings. Remove concrete tunnel walls and roofs for tunnels that do not support equipment. Remove existing chain link door and accessories or barriers blocking tunnels. Fill tunnel with reinforcing steel and concrete or shotcrete. Repair walls and floor after removal of tunnel walls and roofs. Paint concrete to match adjacent surfaces. (four locations).
d. Wall openings: Remove wire mesh over opening, 5'W x 12'H (approximate) and 1'W
x 2'H (approximate), and framing around wall openings. Fill openings with reinforcing steel and concrete or shotcrete. Paint concrete and repairs to match adjacent surfaces. A depot employee shall escort the contractor while working in Warehouse 19. (two openings).
e. Fire door opening: Remove fire doors and accessories on both sides of firewall. Fill
opening with reinforcing steel and concrete or shotcrete. Paint concrete and repairs to match adjacent surfaces. (One location)
Performance Period: Contractor shall commence work upon Notice to Proceed and shall
complete the entire work ready for use within 150 calendar days after receipt of Notice to Proceed.
Working Hours: The work to be performed shall be during the regular working hours
which consist of 8 and ½ hour period established by the Contracting Officer, Monday
through Friday, normally 0700 to 1530, excluding Government holidays.
The NAICS Code for this procurement is 238140. The small business size standard is
$15,000,000.
The magnitude of this construction effort is between $100,000 and $250,000.
The tentative timeframe for issuance of the Invitation for Bid (IFB) solicitation SP3300-
18-B-0015 for the above stated requirement is on or around August 20, 2018. The exact date and time for the pre-proposal/site visit will be stated in the solicitation.
Access to the solicitation package to include the specifications and drawings will only be made available to prospective offerors via the Federal Business Opportunities
(FedBizOpps) website at http: www.fbo.gov. Hard copies of the solicitation will not be
distributed.
Any questions concerning this project should be directed to the Acquisition Specialist
Paul Holbert at paul.holbert@dla.mil. All questions should be submitted in writing via
email to the above.
Prospective offerors are cautioned concerning their responsibility to access the website
for any amendments that may be issued under the IFB. There will be no advance
notification of amendment issuance. Prospective offerors are advised to consult the
website frequently to check for any amendments. Amendments may be issued up until
the quote closing date. Failure to acknowledge amendments may render your quote
ineligible for award.
NOTE: All offerors MUST be registered in the System for Award Management (SAM)
Database at http://www.sam.gov or an award cannot be processed. The solicitation will
identify all information that the prospective offeror must submit in order to be considered for award. Failure to submit all the information requested by the solicitation may result in the bid being eliminated from consideration for award.
All responsible small business concerns may submit a quote which shall be considered by this agency. The Government intends to award a contract as a result of this IFB. Award will be made to the lowest responsive, responsible bidder. An offeror must be
determined responsible according to the standards of FAR Subpart 9 to be eligible for
award..