Explosion Proof Scissor Lifts

Awarded Award Notice Posted Mar 23, 2016

Solicitation number: FA8126-16-Q-0161
Agency: AFLCMC Tinker AFB Lifecycle Management Center, Department of Defense
Awarded: Sep 26, 2016 to Man Lift Mfg. CO.
Set-aside: Total Small Business

Opportunity facts

Contract number: FA8125-16-C-0010 Federal contract award
NAICS code: 333924 Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
PSC: Not on record
Place of performance: Tinker Air Force Base Tinker Air Force Base, Oklahoma 73145, United States

Notice details come from SAM.gov. Updated Sep 26, 2016.

Notice text

6 versions

As posted on SAM.gov.

Update #6 · Latest · Sep 26, 2016

Added: Sep 26, 2016 4:29 pm

Contract FA8125-16-C-0010 has been awarded to Man Lift Manufacturing Co. 26-September 2016.

Update #5 · Aug 24, 2016

Added: Aug 24, 2016 5:24 pm

Amendment 0002 to Solicitation FA8126-16-Q-0161 is hereby attached.

The purpose of this amendment (FA8126-16-Q-0161-0002) is to:

1. Revise Paragraphs 3.1 (c) and 3.1 (d) of the Statement of Work (SOW),

2. Revise Subfactor 1.c of the Technical Evaluation Criteria Check List along

with Clause 52.212-2 of the solicitation, and

3. Extend the response due date of the solicitation from 10 June 2016 to

31 August 2016 at 12:00 PM CST.

Note: Paragraph 3.1 (c) of the previous SOW of 16 December 2015 incorrectly inquired OSHA/ANSI Z359 certification for the fall arrest systems attached to the platform of the lift that shall allow personnel to safely perform tasks outside of the platform. Please refer to the rectified Paragraph 3.1 (c) of the SOW of 24 August 2016 that is posted with this amendment to see the change.

Please send your proposal to Hiwot Tamirat at hiwot.tamirat@us.af.mil .

If you need further clarification, please contact Hiwot Tamirat at hiwot.tamirat@us.af.mil or(405) 739-9117.

Update #4 · Jun 7, 2016

Added: Jun 07, 2016 4:29 pm

Amendment 0001 to Solicitation FA8126-16-Q-0161 is hereby attached.

The purpose of this modification (FA8126-16-Q-0161-0001) is to:

1. add specification detail to the requirement, and

2. extend the solicitation due date from 19 May 2016 at 3:00 PM CST to 10 June 2016 at 1:00 PM CST.

Please send your proposal to Hiwot Tamirat at hiwot.tamirat@us.af.mil .

If you need further clarification, please contact Hiwot Tamirat at hiwot.tamirat@us.af.mil or(405) 739-9117.

*Offerors must be registered and be active in the System For Award Management website (www.sam.gov) to be considered for this acquisition.*

Update #3 · May 3, 2016

Added: Mar 23, 2016 6:08 pm Modified: May 03, 2016 5:57 pmTrack Changes The Government would like to solicit this 100% Small Business Set-Aside requirement:

Six (6) explosion proof scissor lifts shall meet the following requirements:

- The explosion proof scissor lifts shall be 3rd Party (such as Underwriters Laboratory (UL) and Factory -Mutual (FM)) certified for use in a Class I, Division I Hazardous environme

- The scissor lifts shall be battery operated.

- The batteries shall have a continuous use of a minimum eight (8) hours.

- The scissor lifts shall have OSHA certified fall arrest systems attached to the platform of the lift that shall allow personnel to safely perform task outside of the platform.

- The contractor shall provide a standard 120V plug for charging the explosion proof scissor lifts.

- The scissor lifts shall be capable of supporting a minimum of two persons with tools. (Minimum 600 lbs.)

- The scissor lifts shall be equipped with a compressed airline to support the operation of tools (paint guns, sanders, HEPA vacuum equipment, etc.).

- The scissor lifts shall be capable of reaching a minimum height of 30 feet vertically.

- The scissor lifts shall have an extendable platform to allow more surface area coverage.

- The scissor lifts shall be used in hazardous wet locations and all enclosures shall adhere to NEMA requirements.

- The scissor lifts shall have padded rails to help minimize damage to any object that the platform rail may contact.

- The scissor lifts shall have a collision avoidance system that will prevent or minimize damage to when the scissor lift comes in contact with an aircraft.

This is a synopsis (pre-solicitation). Formal solicitation with additional information will be posted shortly.

*** Offerors must be registered and be active in the System For Award Management website (www.sam.gov) to be considered for the contract award. ***

If you need further clarification, please contact Hiwot Tamirat at hiwot.tamirat@us.af.mil/(405) 739-9117 or Adam Nicholas at adam.nicholas@us.af.mil/ (405) 739-5194.

Added: Apr 19, 2016 5:34 pm Modified: May 03, 2016 5:57 pmTrack Changes

The formal solicitation (SF 1449) and its subsequent files are hereby attached for the following requirement:

Six (06) Each Explosion Proof Scissor Lifts

Response date is 19 May 2016 at 3:00PM CST. Please send your proposals to Hiwot Tamirat at hiwot.tamirat@us.af.mil.

Please note that the below requirements are met when you submit your proposal:

1. Page 1 of 50 -- Put your Company's information (Name and address) and CAGE Code in Block 17a.

2. Page 1 of 50 -- Wet sign; put the name and title of the signee, and date signed in Blocks 30a, 30b, and 30c.

3. Pages 3 of 50 -- Put the "UNIT PRICE", the extended "AMOUNT", and the "NET AMOUNT".

4. Pages 8 to 22 of 50 -- Provide the necessary information for FAR Clause 52.212-3.

5. Pages 33 of 50 -- Provide the necessary information for FAR Clause 52.225-18.

6. Page 35 of 50 -- Provide the necessary information for DFARS Clause 252.209-7991(b).

7. Pages 43 of 50- Provide the necessary information for AFFARS Clause 5352.223-9000 (c).

*Offerors must be registered and be active in the System For Award Management website (www.sam.gov) to be considered for this acquisition.*

**Please send your proposal to Hiwot Tamirat at hiwot.tamirat@us.af.mil and Adam Nicholas at adam.nicholas@us.af.mil.**

Update #2 · Apr 19, 2016

Added: Apr 19, 2016 5:34 pm