Excavator Bucket with thumb
Closed Solicitation Posted
- Solicitation number
- W50S7X-24-Q-0023
- Agency
-
Army National Guard
Department of the Army, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333120 Construction Machinery Manufacturing
- PSC
- 3830 Truck And Tractor Attachments
- Place of performance
- McConnell AFB, Kansas 67221, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army National Guard is seeking to procure one new excavator bucket with thumb that meets specific salient characteristics. The key requirements include the bucket fitting a Case CX 210B (MFR 2009) excavator, being 42 inches wide with an integrated thumb, having a capacity between 0.9 and 1.1 cubic yards, weighing less than 3,400 pounds, and incorporating safety and maintenance features. The evaluation will be based on the lowest price meeting the salient characteristics. Vendors must be registered in SAM.gov with an active status and small business designation by the response due date of July 31, 2024.
This is a 100% small business set-aside under NAICS code 333120 - Construction Machinery Manufacturing. The place of performance is in Wichita, KS 67221. No incumbent contractors are named, and no award value or budget range is provided in the solicitation notice. The requested quantity is one new excavator bucket with thumb.
Notice text
2 versions
Update #2 · Latest ·
This is requirement is for (1) new excavator bucket with thumb that meets the following salient characteristics:
Must fit Case CX 210B (MFR 2009)
Size requirement 42in wide
Thumb integrated with bucket not mounted separate to boom
Capacity of minimum 0.9 yard maximum 1.1 yards
Weight less than 3400lbs
Thumb cylinders must be fully enclosed throughout thumb range of motion for protection
Grip the load and hold it securely throughout the full rotation of the bucket
Grease bank for simple and routine maintenance
Bottom wear plate and side bars for extra grip
Pressure relief valving or other safety features so the thumb cannot overpower the hydraulic cylinders.
Excavator is Direct Pin
Hydraulic Bucket
Update #1 ·
This is requirement is for (1) new excavator bucket with thumb that meets the following salient characteristics:
Must fit Case CX 210B (MFR 2009)
Size requirement 42in wide
Thumb integrated with bucket not mounted separate to boom
Capacity of minimum 0.9 yard maximum 1.1 yards
Weight less than 3400lbs
Thumb cylinders must be fully enclosed throughout thumb range of motion for protection
Grip the load and hold it securely throughout the full rotation of the bucket
Grease bank for simple and routine maintenance
Bottom wear plate and side bars for extra grip
Pressure relief valving or other safety features so the thumb cannot overpower the hydraulic cylinders.
Files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis Excavator Bucket with Thumb.docx | DOCX document |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity