Edge-splitting crystal for hard x-ray split-delay system (HXRSD)
Closed Solicitation Posted
- Solicitation number
- Req-367276
- Agency
-
Office of Science
Department of Energy
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332323 Ornamental and Architectural Metal Work Manufacturing
- Place of performance
- Menlo Park, California 94025, United States
- Points of contact
-
- Bernadette Espiritu espiritubernadette@yahoo.com (650) 926-2838
Notice details come from SAM.gov. Updated .
About this opportunity
SLAC National Accelerator Laboratory, operating on behalf of the Department of Energy Office of Science, seeks a single edge-splitting crystal for a hard X-ray split-delay system, with quotes due August 25. This is a subcontract procurement (not a direct federal buy), governed by SLAC's DOE-approved purchasing system and incorporating applicable federal requirements by reference.
Place of performance is Menlo Park, California. The requirement is for one FZSi monochromator with (220) crystalline orientation, single-crystal silicon, conforming to drawing DSG-000109878. Critical specifications include dimensional tolerances of ±0.02 mm or better, angular tolerance of ±0.1 degree or better, crystallographic orientation accuracy of ±0.02 degrees (W axis) or ±0.05 degrees (Y axis) or better, RMS surface roughness of 5 nm or better on polished diffraction surfaces, and RMS flatness of 100 nm or better. Surface C is specified as "good as cut"; diffraction edges must be polished to edge and free of machine damage. Dimensions are 30 × 7.5 × 22 mm with 85-degree angle polishing on the EC1 reflective surface and etching on other surfaces.
The NAICS code is 332323, Ornamental and Architectural Metal Work Manufacturing; PSC is AG13, Energy R&D Services. Subcontracts incorporate FAR clauses by reference, including Buy American Act requirements. Offerors must complete the BAA Certification form (number 367276) identifying domestic content and estimating foreign content as a percentage of award price within plus or minus 5 percent accuracy. Standard SLAC commercial fixed-price terms apply, including one-year minimum warranty, forty-five-day inspection and acceptance, and thirty-day payment after acceptance.
Notice text
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.
The following is attached for you to complete and review:
- Buy American Act (BAA)
- Drawing 1 - DSG-000109878
- FP Commercial Supplies-Services T&C’s ( August 2023)
- SLAC_General_Ts_Cs_Supplemental_Rider_Aug2026_Rev1
Request for Quote:
Qty-1 of FZSi Monochromator(220) EC1 reflective surface polishing other surfaces
etching EC 1 size 30 X 7.5 X 22mmt Angle polishing 85 °
Evaluation Factor-
Material
Single-crystal silicon (Si).
Crystal orientation
Si (220), as specified in drawing DSG-000109878. Vendor shall provide the orientation for surface D.
Dimensions and tolerances
Crystal geometry and dimensions shall conform to drawing DSG-000109878. Dimensional tolerance: +/-0.02 mm or better where specified; angular tolerance: +/-0.1 degree or better.
Crystallographic orientation accuracy
Crystallographic orientation shall meet the tolerances specified in DSG-000109878 with miscut <0.02 degree
Diffraction-surface edge polishing
Diffraction surfaces A and B shall be polished as indicated in DSG-000109878. The designated diffraction regions shall be polished continuously to the specified edges, with no unpolished edge exclusion zone.
Surface roughness
RMS surface roughness of diffraction surfaces A and B shall be 5 nm or better.
Surface flatness
RMS surface flatness of diffraction surfaces A and B shall be 100 nm or better.
Surface C
Surface C may be supplied good as cut, as specified in DSG-000109878.
Machine damage / induced strain
All surfaces shall be free of machine damage and etched to remove induced strain. The crystal shall be free of strain after polishing/etching.
Orientation marking
Crystal orientation shall be inscribed/marked as indicated in DSG-000109878.
Technical compliance documentation
Vendor quotation/proposal shall explicitly confirm compliance with the material, dimensional, crystallographic-orientation, edge-polishing, roughness, flatness, etching, and marking requirements above.
Quote is for product only; no on-site services permitted.
Source selection will be based on Lowest Priced Method and best Lead-Time.
Please provide a price and lead time quotation by 8/25/2026
Send quote to espiritu@SLAC.stanford.edu.
Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?
Buy American Act Certification (BAA) applies to awards over $15,000 unit price.
Representations & Certifications Rider is required. Once completed the Reps and Certs are valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.
Please include in your proposals the Harmonized Tariff Schedule (HTS Code) if applicable.
All subcontractors are required to register in the System for Award Management (www.sam.gov).
If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.
The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order. Please markup terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions.
Payment Terms will be NET-30
For Domestic Suppliers - Freight terms will be FOB Destination Prepaid and Add.
Foregin Supplier - Shipment will be made CIP SLAC, Menlo Park, and Duty Unpaid.
You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.
Contact me directly with any questions.
Kind Regards,
Bernadette Espiritu
Procurement Commodities Team
SLAC National Accelerator Laboratory
2575 Sand Hill Road Menlo Park, CA 94025
P- 650-926-2838
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| X-ray imaging detector system | Office of Science | No set-aside | |
| Fabrication | Office of Science | No set-aside | |
| Micro Electron Diffractometer (MicroED) System | Department of Energy | No set-aside | |
| High power hollow core fiber assembly for laser pulse compression | Office of Science | No set-aside | |
| BL18 In-Vacuum Undulator | Office of Science | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity