Dumpsters, Roll offs and Compactors
Closed Pre-Solicitation Posted
A newer solicitation was posted. See the latest solicitation from .
- Solicitation number
- W912CN-20-Q-0021
- Agency
- Army Contracting Command Army Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332439 Other Metal Container Manufacturing
- Place of performance
- Schofield Barracks HI 96857 USA
Notice details come from SAM.gov. Updated .
About this opportunity
This pre-solicitation notice seeks sources for the procurement of various refuse containers including 45 eight cubic yard dumpsters, six thirty cubic yard roll off dumpsters, and two thirty cubic yard compactors. The Army Contracting Command, 413th Contract Support Brigade Regional Contracting Office Hawaii requires these items to meet minimum salient characteristics described. Responses to this sources sought notice will be used to determine potential qualified firms and identify manufacturers. All responses must be submitted to the point of contact by April 15, 2020.
There is no set-aside designated for this procurement. The non-manufacturer rule outlined in 13 CFR 121.406 applies, requiring at least 50% domestic manufacturing for small business supply contracts. Award may be set-aside for small businesses depending on response analysis. No incumbent, budget, or quantity details are provided though the goods requested indicate this will likely be a standard commercial item procurement following market research from this pre-solicitation notice.
Notice text
The Army Contracting Command, 413th Contract Support Brigade (CSB), Regional Contracting Office, Hawaii (RCO-HI) has a requirement to purchase various types of refuse containers.
Minimum Salient Characteristics:
Forty-Five (45) – Eight (8) Cubic Yard Dumpster
- Slant Style 8 Cubic Yard Dumpster
- Floor – 10 Gauge or greater
- Back, Sides - 12 Gauge or greater
- Front - 12 Gauge or greater with 1” Corrugation for increased strength
- Pockets - 36" 10 Gauge or greater with 3/16" Bumper Plates.
- Top Rails - Formed 10 Gauge or greater - Drain/ Drain & Plug – 1.5” or greater - Lid – 36X57 or greater Single Wall Plastic- Primer – Rust Inhibiting, Heavy Duty Coating inside, outside front, back, sides and bottom - Finish - 2 Coats or more of High Solid Marine Enamel in Dark Brown inside, outside front, back, sides, and bottom - Stenciling – White Lettering with minimum two (2”) inch in height and two (2”) inches in width per letter.
Six (6) – Thirty (30) Cubic Yard Roll off Dumpsters
- Open Top Roll-Off Tub Style Dumpster - Inside Dimensions: 264"L X 82.50"W X 66"H or greater - Rear Wheels - 8" or greater - MAIN RAILS - Bemar or equivalent understructure with 6” X 2” X .250" or greater tube - Cross members - 3" Structural Channel Spaced 24" on Center - Front Door Panel - 0.250" Floor and 0.188" Sides or greater - Rear Door – Single Side Swing with Cam Style Closure - Top Rails – 4” X 3” X 0.188" or greater - Front Ladder - Standard Tarp Hooks on all sides. - Primer - Heavy Coating inside, outside front, back, sides and bottom - Finish - 2 Coats or more of High Solid Marine Enamel in Dark Brown inside, outside front, back, sides and bottom - Stenciling – White lettering with minimum two (2”) inch in height and two (2”) inches in width per letter.
Two (2) – Thirty (30) Cubic Yard Compactors
- 2 cubic yard charge box with a 40" x 58" or greater opening
- Remote Hydraulic Power Unit - All Hydraulic lines with quick disconnects on both sides of compactor
- Key operated compactor controls w/ 5 keys
- Color coded pressure gauge for compactor fullness
- Multi Cycle Timer
- 10HP 3-phase Tri-Volt motor tied to 208V
- Container Full light
- Universal Understructure
- Low oil level & High temperature shutdown
- Primer - Heavy Coating inside, outside front, back, sides and bottom
- Finish - 2 Coats of High Solid Marine Enamel in Dark Brown inside, outside front, back, sides and bottom
- Stenciling – White lettering with minimum two (2”) inch in height and two (2”) inches in width per letter.
This announcement is a Sources Sought Notice to establish market research. This is not a Request for Quote(RFQ) or Request for Proposal (RFP). This annoucement is to obtain information for planning purposes. Responses in any form are not offers and not to be taken as a commitment by the Government as implied or otherwise to issue a soliciation or award a contract.
Based on the responses to this sources sought notice/market research, this requirement may be set-aside for small businesses or procured through full and open competition.
The Non-Manufacturer Rule (NMR) in accordance with 13 CFR § 121.406, September 4, 2019 applies to this acquisition. For small business set-asides other than construction or service contracts the prime contractor that s supplying products to the government is required to cover at least 50 percent of the cost of manufacturing those products. The non-manufacturer rule is an exception to that requirement. The rule allows a small business to supply products it did not manufacture as long as those products come from another small business. A manufacturer is defined as a business that, with its own facilities, performs primary activities in transforming inorganic or organic substances, including the assembly of parts and components, into the end product being acquired. In other words, a manufacturer makes or produces products. Businesses may qualify as a non-manufacturer if it meets the following criteria: Does not exceed 500 employees; is primarily engaged in the retail or wholesale trade and normally sells the type of products being supplied; will supply the end products of a small business manufacturer or processor made in the United States, or obtains a waiver of such requirement See Title 13 Part 121.406 of the Code of Federal Regulations (CFR) for detailed information about the non-manufacturer rule.
The purpose of this Sources Sought Notice is to determine interest and capability of potential qualified firms and identify potential manufacturers of dumpsters, roll offs and compactors. Businesses of all sizes are encouraged to respond.
SUBMISSION REQUIREMENT FOR RESPONSES TO THIS SOURCES SOUGHT NOTICE:
1) Intention to submit a quote for this requirement when it is formally advertised.
2) Name of firm with address, phone number, email address and point of contact.
3) Cage code and DUN's number.
4) Size of firm.
5) Statement of Capability stating your skills, experience and knowledge required to perform the specific type of work.
NOTE: IF YOU DO NOT INTEND TO SUBMIT A QUOTE FOR THIS REQUIREMENT WHEN IT IS FORMALLY ADVERTISED, PLEASE DO NOT SUBMIT A RESPONSE TO THIS SOURCES SOUGHT NOTICE.
Please send your responses to Kylene Yamauchi at kylene.k.yamauchi.civ@mail.mil by Wednesday, 15 April 2020 at 12:00pm HST.
Notice history
| Notice | Type | Posted |
|---|---|---|
| Dumpsters, Roll offs and Compactors | Solicitation | |
| Dumpsters, Roll offs and Compactors | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity