Construction Fit-Out Consular Agency Playa del Carmen

Added: Oct 01, 2015 1:17 pm The United States Government (USG) requires a Contractor to perform fit out construction services at Commercial Space 33 and 34, Carretera Federal Puerto Juarez-Chetumal, Mz. 293 Lt. 1, CP. 77710, Playa del Carmen, Quintana Roo, Mexico property in order to conduct consular services for U.S. citizens.

Contractor shall construct, install and finish 98.83 m2 office space in accordance with specifications and USG provided basic drawings.

Long lead items include 5 minute Forced Entry (FE) windows and doors and 3mm steel plate enforced walls as follows:

Materials & installation specifications. Contractor shall supply the following materials in the adequate quantity and quality as described below or equivalent necessary to perform the project, but not limited to:

Partitions. The Contractor shall install Wall, made out of 10x20x40 cm cinder block divisions in the interior of the office space and Acustiflex panel model 1050 partition where the service windows are going to be installed. This partition has to go from floor to ceiling (see layout and details) and include a 3 mm steel plate in the wall.

Doors. The contractor shall furnish and install two (2) solid core, 5 minute forced-entry exterior doors, with emergency escape push bars, which open to the outside. The 5 minute FE doors must have an FE rating of DOS1141 and security hardware SHW5A provided by one of the below approved vendors. 

Service windows. The contractor shall install four (4) service bank teller-type windows with a document tray at the bottom. The 5 minute FE windows must be provided by one of the below approved vendors:

• Norshield Security Products- www.norshield.net
• Ross Security solutions- www.rosssecuritysolutions.com
• Fabrication Designs, INC (FDI)- www.fabricationdesigns.com
• Salzer Security- www.salzer-security.com
• Insulgard TM Security Products -www.insulgard.com