Collapsible Fixed-Wing Low-Cost Unmanned Aerial System for Intelligence, Surveillance, and Reconnaissance Missions

Open Pre-Solicitation Posted

Solicitation number
DON27BZ02-NV022
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

Points of contact
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

About this opportunity

The Office of Naval Research, Department of the Navy, is seeking Phase I SBIR proposals for a collapsible, fixed-wing Group 1 small uncrewed aerial system (sUAS) for intelligence, surveillance, and reconnaissance missions, with responses due January 6, 2027. The opportunity is a Total Small Business set-aside. It is DoD SBIR topic DON27BZ02-NV022, posted November 4, 2026, under focus areas of Advanced Materials, Integrated Sensing and Cyber, and Trusted AI and Autonomy.

The system must cost under $5,000 for airframe and components, fly for more than one hour, and fit within a 2' x 2' x 1' transport case for deployment by a single operator. It must support a modular nose payload, initially equipped with an RGB camera. Communication range is up to 10 km. The UAS should fly autonomously and integrate with standard flight control software such as QGroundControl and Pixhawk. The topic also notes potential use as a signal repeater for data transmission.

Phase I deliverables include a feasibility determination, trade studies for materials and components, modeling and simulation of aerodynamic performance, flight endurance, and structural integrity, a detailed concept design report, and simulation results. The concept centers on a Foldable Low-cost Expendable Wing (FLEX-Wing) design.

The topic requires CMMC Level 2 (Self) and is not ITAR-controlled. It is coded NAICS 541715 and PSC AC12. The source does not state an award value or period of performance.

Notice text

DoD SBIR topic DON27BZ02-NV022

Component: NAVY

Command: ONR

Phase: SBIR Program Phase I Action

Technology Areas: None

Focus Areas: Advanced Materials; Integrated Sensing and Cyber; Trusted AI and Autonomy

Keywords: Group 1 sUAS; foldable; attritable; drone; man-packable; low-cost

ITAR: No

CMMC: Level 2 (Self)

Objective:

Develop a collapsible, low-cost, fixed-wing Group 1 small uncrewed aerial system (sUAS) capable of autonomous intelligence, surveillance, and reconnaissance (ISR) missions with a flight endurance of over one hour.

Description:

The Navy has a growing need for a low-cost, portable, and rapidly deployable UAS to support ISR missions. Current systems are often expensive and bulky, and require significant logistical support. This SBIR topic seeks an innovative solution for a collapsible fixed-wing UAS that can be easily transported and deployed by a single operator. The UAS should be capable of autonomous flight and integration with standard flight control software (e.g., QGroundControl, Pixhawk).

Key requirements include a total cost under $5,000 for the airframe and components, a flight time exceeding one hour, a communication range of up to 10 km, and the ability to fit within a 2' x 2' x 1' case for transport. The system must support a modular nose payload, be initially equipped with an RGB camera, and have the potential to serve as a signal repeater for transmission of data. The primary technical challenge is to achieve the desired endurance and portability within the stringent cost constraints, requiring innovation in airframe design, materials, and component integration.

Phase I:

Develop a concept for a low-cost, collapsible Foldable Low-cost Expendable Wing (FLEX-Wing) sUAS. Determine the technical feasibility of the concept. Conduct trade studies for materials and components. Perform modeling and simulation to validate the aerodynamic performance, flight endurance, and structural integrity. Deliver a detailed concept design report, simulation results, field test results of the prototype, and a preliminary bill of materials demonstrating the path to achieving the cost target.

Phase II:

Design and develop a prototype through a structured, iterative engineering cycle within the appropriately distributed across the allotted Phase II timeframe to ensure feasible execution and rigorous validation. Fabricate and validate the prototype of the FLEX-Wing sUAS. Produce prototype hardware that transitions the flat-pack, off-the-shelf structural concepts into a fully integrated, flight-capable system. Deliver the physical prototype hardware (minimum of three complete kits) and associated technical data packages to the SYSCOM sponsor. (Note: The prototypes will undergo validation against the strict weight (Group 1), size, cost, and endurance metrics to verify readiness for Phase III commercialization and transition into a formal PMA-263 capability portfolio.)

The specific hardware and software to be developed and produced includes:

 

  • The Airframe: A foldable, stackable, and bendable fixed-wing structure utilizing low-cost commercial off-the-shelf (COTS) materials (e.g., weatherproofed craft board/polymer) keeping total airframe and component costs below $5,000 per unit.
  • A fully self-contained air vehicle kit that fits entirely within a compact 2 ft × 2 ft × 1 ft transit case (e.g., a Pelican case), including the folded airframe and required batteries. The Ground Control Station (GCS) may be provided separately, but must be backpack-portable (approximately laptop-sized) and capable of controlling multiple FLEX-Wing air vehicles.• Avionics & Software: Integration of a Pixhawk (or similar)-based flight controller running open-source flight software (e.g., QGroundControl).
  • Payload & Communications: A modular nose-cone payload system featuring a baseline RGB camera for ISR loiter missions and an interchangeable signal repeater module. The communications suite will setup a telemetry link capable of up to 10km range.

 

Execution Phase Timeframe Associated Scope & Engineering Effort

  1. Design & Component Sourcing Months 1-6 Based on Phase I modeling, design and develop a prototype architecture. Finalize COTS component selection (e.g., Pixhawk, 5.2GHz RF modules, RGB sensors) and establish manufacturing processes for the foldable airframe materials (e.g., die-cutting, hinge reinforcement).
  2. Prototype Fabrication Months 7-12 Produce prototype hardware. Integrate the high-energy-density power systems required to achieve the >1 hr flight time. Assemble the modular nose payload bay and ensure the total system fits within the 2x2x1 ft storage constraint.
  3. Integration & Software Tuning Months 13-18 Integrate flight controller firmware with QGroundControl. Develop processes, select an application (e.g., autonomous waypoint ISR and manual FPV terminal guidance), and validate the software hand-offs in a simulated environment.
  4. Demonstration & Validation Months 19-24 Develop, demonstrate and validate the physical prototype in a relevant open-air test environment. Validate the up to 10km RF range, >1hr endurance, aerodynamic stability of the foldable wings, and ISR/signal-relay mission profiles.

Phase III:

Expected Final State of the Technology

At the conclusion of the Phase II effort, the technology will exist as a fully integrated, flight-validated Group 1 sUAS with a finalized technical data package (TDP). The final state will be a highly mature prototype characterized by a scalable, low-cost manufacturing process (e.g., die-cut stamping of the COTS airframe materials). The system will feature DoW-compliant, open-architecture avionics and a validated modular nose payload bay, consistently demonstrating the ability to meet the sub-$5,000 cost threshold and the compact 2' x 2' x 1' storage requirement.

Scale the manufacturing process for high-volume, commercial production, allowing the military to purchase the system in bulk. Tactical operators will unpack, hand-launch, and utilize the system in contested or anti-access/area denial (A2/AD) environments for beyond-line-of-sight (BLOS) ISR, target acquisition, or to establish temporary mesh network extensions. Because it is highly attritable, warfighters will employ the system aggressively without the burden of planning for asset recovery, reverse logistics, or depot-level maintenance.

Target Platform and Program of Record

The expected transition path for the Phase III technology is insertion into the Small Unit Remote Scouting System (SURSS), an Acquisition Category IV program managed by the Naval Air Systems Command, Program Manager, Air 263 (Navy and Marine Corps Small Tactical Unmanned Aircraft Systems). The FLEX-Wing will serve as a complementary, expendable platform within their broader Family of Small UAS (FoSUAS) portfolio.

Potential commercial dual-use applications include rapid damage assessment following natural disasters, environmental monitoring, agricultural and land-management surveying, infrastructure inspection, and search-and-rescue support. These applications similarly benefit from a low-cost, portable, rapidly deployable fixed-wing sUAS with extended endurance.

Similar open opportunities

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors