CGC maria bray (WLM 562) FY2012 drydocking and repairs

The U.S. Coast Guard, Surface Force Logistics Command, IBCT, C&P2 will be issuing a solicitation for the FY12 Drydocking and Repairs of the CGC MARIA BRAY (WLM 562) whose home moorage is located in Atlantic Beach, FL. The eventual contract will be performed at the contractor's certified drydock facility. This procurement will be a total small business set-side for all 336611 North America Industry Classification System code contractors. The period of performance will begin on 3/21/12 and complete 5/30/12. Only one firm fixed-price contract will be awarded for this procurement. Foreseeable costs will be included in the price evaluation of offers. This procurement is not geographically restricted. The proposed work items include but are not limited to:

Hull Plating (Side Scan), Ultrasonic Testing
Hull Plating, U/W Body, Inspect
Appendages (U/W), Leak Test
Appendages (U/W) - Internal, Preserve
Voids (Non-Accessible), Leak Test
Voids (Non-Accessible), Preserve Internal Surfaces
Tanks (Potable Water), Clean and Inspect
SW Heat Exchangers , Clean , Inspect and Hydro
Fathometer Transducer , Renew
Sea Strainers - Duplex (All Sizes), Overhaul
Sea Bay , Preserve 100%
Thruster Unit (General) , Overhaul
Crossdeck Winches, Overhaul
Mechanical Chain Stoppers , Overhaul
Anchor Windlass , Level 3 Overhaul
Anchor Chain (s) and Ground Tackle, Inspect and Repair
Grey Water Holding Tanks , Clean and Inspect
Sewage Holding Tanks , Clean and Inspect
Grey Water Piping , Clean and Flush
Sewage Piping , Clean and Flush
Chain Locker, Preserve 100%
Tanks (Potable Water), Preserve " 100% "
Decks - Exterior( Buoy ), Preserve
U/W Body, Preserve "100%"
Cathodic Protection / Zincs, Renew
Drydocking
Temporary Services, Provide
Propulsion Shaft Bulkhead Seals , Upgrade
Deck Covering ( Electrical Matting ) , Renew
Deck Covering (Interior Wet/Dry) , Renew
Sea Valves and Waster Pieces , Overhaul or Renew
Hydraulic Chain Stoppers, Overhaul
Z - Drive Input Drive Shaft, Alignment Check
Z - Drive Input Drive Shaft, Thrust Bearing Renewal
ASW Piping System, Clean and Inspect
Hull and Structural Plating - 10
Hull and Structural Plating - 12
Hull and Structural Plating - 15
Hull and Structural Plating - 20
Anchor (s) , Preserve
Tanks (Ballast), Preserve " 100% "
Tanks ( Grey Water Holding ) , Preserve " 100% "
Tanks ( Sewage Holding ) , Preserve " 100% "
Hull Plating ( Buoy Port Areas ) , Preserve
Temporary Messing and Berthing , Provide
Buoy Crane, Inspect and Repair
Bilges (Machinery Space) - Engine Room , Preserve
XO Stateroom, Modify
SW Heat Exchangers , Clean , Inspect and Hydro
Bilges (Cargo Hold) Preserve
Sea Bay, Inspect
Bow Thruster Motor, Clean & Inspect

A Request for Proposal (RFP) will be issued no earlier than 11/7/11. For further information concerning this acquisition, contact the POC identified on this Notice. Drawings on CD may be requested by emailing the Contracting Officer at james.altice@uscg.mil