B369 Boiler
Closed Pre-Solicitation Posted
- Solicitation number
- B369_Boiler
- Agency
-
Air Combat Command
Air Force, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332410 Power Boiler and Heat Exchanger Manufacturing
- PSC
- 4410 Industrial Boilers
- Place of performance
- Offutt AFB, Nebraska 68113, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Air Combat Command is seeking to procure a new NTI model LX-600 hydronic gas boiler with a 600,000 BTU input capacity and 600 MBH minimum output for Project B369 under NextGen Work Task #WT 18321061. The boiler must feature an ASME stainless steel heat exchanger, floor-mount configuration, factory-provided ASME relief valve, and achieve 95% combustion efficiency with a minimum 4:1 turndown ratio on natural gas. Required specifications include a 4-inch exhaust vent with 4-inch fresh air intake, outdoor sensor, CSD-1 controls with integrated electronic controller and touch screen interface, factory-installed condensate trap, and condensate drain kit. The boiler must not exceed dimensions of 24 inches wide by 47.5 inches deep by 55 inches high, with specific water, gas, and air connection configurations. The contractor must provide a minimum 1-year comprehensive warranty on all new materials. The pre-solicitation notice was posted on April 30, 2026, with a response deadline of May 11, 2026.
This procurement is designated as a Total Small Business set-aside, restricting competition to qualified small business concerns. The government file provided does not indicate a specific award value or budget range for this boiler purchase. Only one unit of the specified boiler model is being procured, and no incumbent contractor or current supplier is identified in the available documentation. The procurement references NAICS code 332410 (Power Boiler and Heat Exchanger Manufacturing) and PSC code 4410 (Industrial Boilers), indicating the standard industrial classification for potential bidders. The relatively short response window of 11 days suggests this may be a straightforward equipment purchase with a defined specification rather than a complex services contract.
Notice text
The scope of work is to provide a new NTI model LX-600 boiler; 600,000 BTU input, with ASME SS heat exchanger, floor-mount, factory-provided ASME relief valve, at least 4 to 1 turn down, 95% combustion efficiency, 4” exhaust vent and 4” fresh air intake, with outdoor sensor, CSD-1 controls, integrated electronic controller with touch screen access, and factory-installed condensate trap and included condensate drain kit.
The hydronic gas boiler must be at least 600 MBH capacity, with at least 4:1 turndown on natural gas, and dimensions no larger than 24"wide x 47.5"deep(long) x 55" high, with water (2") and gas (1") connections along the left-hand length side and air inlet/exhaust (4") connections along the top or left-hand length side.
The Contractor shall provide at least a 1-year comprehensive warranty on all new materials.
Files
| File | Type | Posted |
|---|---|---|
| SoN B369 boiler purchase.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| 16292 Steam Boiler Replacement | Air Force Sustainment Center | Total Small Business | |
| Z1DA--NRM CONST - 528A7-18-707 - Replace Boiler Stack Rome CBOC | Veterans Integrated Service Network 2 | Total Small Business | |
| W045--Boiler Rental Montrose VAMC | Veterans Integrated Service Network 2 | No set-aside | |
| Boiler, Feedwater tank, Pump skid | MICC Fort Drum | Total Small Business | |
| SPRTA125R00168 (NSN:2915-01-310-2141) | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity