AR-125 DE-fastening systems maintenance

Added: Jun 22, 2017 3:14 pm  

Presolicitation Synopsis

AR-125 DE-FASTENING SYSTEMS MAINTENANCE

FA8224-17-R-0080

 

309TH MAINTENANCE SUPPORT GROUP (MXSG)

 

 

NOTICE OF INTENT TO SOLE SOURCE: This is a pre-solicitation synopsis in accordance with FAR 5.201. This is not a Request for Proposal (RFP) or an Invitation for Bid (IFB), nor is it to be construed as a commitment by the government. This synopsis is prepared in accordance with guidance found in FAR 5.207, and is prepared for the purpose of notifying potential offerors of an upcoming solicitation for service or supplies. The solicitation for this requirement will be posted under the same reference number as stated above. It is the contractor's responsibility to monitor FedBizOpps on a regular basis for the solicitation along with any amendments. 

 

The Ogden Air Logistics Complex (OO-ALC), Specialized Contracting Office (PZIMB), intends to negotiate with Hartwig Maintenance Company, on a sole source basis under the authority of 10 USC 2304(c)(1), as implemented by FAR 6.302-1.  Only one responsible source and no other supplies or services will satisfy agency requirements, to procure a services for the Computer Numerically Controlled (CNC) Okuma machines located in Bldg. 510 at Hill Air Force Base services include but not limited to technical operating system support, general maintenance, and On-The-Job (OTJ) training. 

 

DESCRIPTION OF SERVICES.  In support of the 309th Maintenance Support Group (MXSG) at Hill Air Force Base (HAFB) for a service contract to perform on-site maintenance for the De-fastening Systems (De-fastener), model # AR-125.  The Contractor shall provide all labor, tools, parts, supplies, equipment, lodging, transportation, and other necessary items needed to perform the required services on the De-fastener located in building 265, 5840 Engine Lane, HAFB. The government maintenance personnel and other government personnel as designated may be present at all times. The Contractor shall maintain the De-fastener to specifications in accordance with (IAW) Original Equipment Manufacturer (OEM) manuals.   

 

BASIC SERVICES. 

 

The Contractor shall provide on-site maintenance to include: preventative maintenance (PM), calibration, troubleshooting, alignment, additional repairs if needed, parts, on-call telephone/email technical support, testing and evaluation, software updates, and on-the-job-training (OJT) for the De-fastener, model # AR-125, in support of the 309th MXSG located in building 265. The Contractor shall be responsible for restoring the De-fastener to a state of functionality equivalent to, or greater than, the condition it was found in, upon contractor arrival. The Contractor shall provide the required services IAW applicable guidance/regulations and/or OEM manuals. 

 

The solicitation will be posted under the same number FA8224-17-R-0080 on FedBizOps from July 5, 2017 through July 22, 2017.

 

Please submit any questions concerning this requirement in writing to all listed below:

 

 

Contract Specialist

AFMC AFSC OL:H/PZIMB

TYLER FITZ

6038 ASPEN AVE B1289 2nd Floor

HILL AFB UT 84056-5805

TEL: 801-777-5486

TYLER.FITZ@US.AF.MIL

 

Contract Officer:

AFMC AFSC OL:H/PZIMB

James Vaughan

6038 ASPEN AVE B1289 2nd Floor

HILL AFB UT 84056-5805

TEL: 801- 775-5252

Email: james.vaughan.6@us.af.mil