736 SFS - Water Stations

The Department of the Air Force Pacific Air Forces, specifically Headquarters 36th Wing at Andersen Air Force Base in Guam, is conducting market research to identify sources for water stations intended for the 736 Security Forces Squadron. This Sources Sought notice (FA524026QM101) seeks technical specifications and supplier information for water dispensing systems but explicitly states it is not a binding procurement request and carries no obligation for the Government to award a contract. The water stations must meet fourteen mandatory requirements, including ADA compliance, water chilling capabilities between 40-42 degrees Fahrenheit, NSF and ISO certifications (NSF/ANSI 42, 53, 58, ISO 09001, and NSF AMSI 372, 61, 51), a multi-filter purification system removing up to 99 percent of tap water impurities, internal drainage systems, secondary manual trigger mechanisms, energy efficiency, and a maximum floor footprint of three square feet. The evaluation will focus on vendors' ability to provide water stations meeting these technical specifications and delivering to multiple locations at Andersen Air Force Base. Interested vendors must submit responses, including technical specification sheets for their proposed water station models, by March 27, 2026, at 4:00 PM Chamorro Standard Time to A1C Austin Johnson and SSgt Daniel Callahan via email.

This Sources Sought notice carries no set-aside designation and represents market research only, with no identified incumbent contractor or current contract values. The Government has not specified a quantity of water stations required or a budget allocation in this pre-solicitation phase, as the purpose is to gather information on available water station models and suppliers prior to developing formal procurement requirements. The water stations will be delivered to multiple locations at Andersen Air Force Base in Yigo, Guam, including the Supply Warehouse (Building 61230), Student Barracks (Building 61250), and Contingency Response Bay (Building 61228), with systems requiring only water line, drain line, and standard 110-volt electrical connections for installation as standalone units. Vendors responding to this Sources Sought should be prepared to demonstrate their systems' compliance with the specified certifications and operational requirements, though this notice remains informational in nature with no reimbursement offered for response preparation costs. The applicable NAICS code for this procurement is 333914 (Measuring, Dispensing, and Other Pumping Equipment Manufacturing).