4520--Hot Water Heater

This is a source sought notice/request for information only. The responses to this posting will be

used to establish the procurement strategy, for example, set-aside, sole source, unrestricted for

a solicitation that VA intends to post in the near future. Please review the attached document(s)

for more details on this requirement.

See attached document(s):

-36C25626Q0922 - Request for Information (RFI)

-Statement of Works (SOW)

DISCLAIMER: THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS SYNOPSIS IS NOT A REQUEST

FOR QUOTE, PROPOSAL, OR BID. This notice is not a solicitation as defined by FAR 2.101, therefore it

shall not be construed as a commitment by the government to enter into a contract, nor does it restrict the

government to an acquisition approach. All information contained in this Request for Information (RFI) is

preliminary as well as subject to amendment and is in no way binding on the government. Information

submitted in response to this notice is voluntary; the government will not pay for information requested

nor will it compensate any respondent for any cost incurred in developing information provided to the

government. The government is requesting that restrictive or proprietary markings not be used in

response to this notice. If a solicitation is released, it will be synopsized in the Federal Contract

Opportunities website or General Services Administration (GSA). It is the responsibility of the interested

parties to monitor these sites for additional information pertaining to this RFI.

1. Title: Hot Water Heaters

2. Purpose: The purpose of this RFI is to identify potential sources that will aid in defining the

procurement strategy for example, set-aside, sole source, or unrestricted for a solicitation the VA intends

on issuing shortly as follows:

The Michael E. DeBakey VA Medical Center (MEDVAMC) located in Houston, Texas has a requirement

for two (2) DHT STV-90030-10D-CU Vertical Steam-to-Water Heater, including steam, condensate, domestic water, controls, and safety devices.

Item #

Description/Part Number* Products

QTY

1.

DHT STV-90030-10D-CU ST SERIES VERTICAL ASSY, 10" DOUBLE WALL COPPER

2 EA

ST-90025-3-10 STEAM VALVE ASSY, 3" VALVE, 10" UNIT

- ST-90024-75-JD8 CONDENSATE DRAIN ASSEMBLY - CAST IRON - 2" - 75JD8

- 22007-240X-6 T&P RELIEF VALVE PACKAGE: T&P RELIEF VALVE N240X-6 1F X 1F

- SR-90026-3 STEAM INLET PIPING ASSEMBLY - 3"

2.

START UP, COMMISSIONING, & OWNER TRAINING 1

1 EA

Warranty & Installation

3.

The contractor shall provide a standard installation warranty covering workmanship, labor, and installation related defects.

. One (1) year from the date of substantial completion

or

One (1) year from the date of startup

(Whichever occurs later, unless otherwise specified by contract.)

Whichever occurs later, unless otherwise specified by contract.)

All labor and workmanship associated with the installation

The anticipated Small Business Administration (SBA) size standard for the North American Industry

Classification System (NAICS) code is 333414 Space and Water Heating Equipment Manufacturing and a standard size of 500 employees. Product Supply Code (PSC) 4520 Heating Equipment (except Warm Air Furnaces) Manufacturing

3. Responses Requested: The following questions must be answered in response to this RFI. Answers

that are not provided shall be considered non-responsive to the RFI:

a. Are the requested items manufactured by a small or large business?

Vendor must attach documentation of this information to be viewed by the government to be

considered as part of Market Research and responsiveness to this Sources Sought notice:

b. Is the potential vendor in compliance with the Non-Manufacturer Rule (NMR)?

Vendor must attach documentation of this to be viewed by the government to be considered as

part of the Market Research and responsiveness to this Sources Sought notice:

c. Is the Vendor an authorized distributor with access to Original Equipment Manufacturer

(OEM) parts which may be required in completion of this requirement? The VA does not

accept grey market items; therefore, the Vendor must attach an authorized distribution

letter as an approved and authorized vendor on OEM letterhead by the manufacturer as

evidence of proof to be viewed by the government to be considered as part of the Market

Research and responsiveness to this Sources Sought notice.

d. Name of potential Contractor that possesses the capability to fulfill this requirement.

Contractors shall also provide the following:

Point(s) of contact name: ______________________________________

Address: ___________________________________________________

Telephone number: ___________________________________________

Email address: _______________________________________________

Company's business size: _______________________________________

UEI #: ______________________________

CAGE Code: _______________________________

e. Is your company considered a small business concern, SB, SDVOSB, VOSB, HUBZone, or

8A concern, with the requisite 339112 NAICS code?

Please provide proof of qualifications.

f. Is your company available under any Government Wide Agency Contract (GWAC), GSA

Schedule, Federal Supply Schedule (FSS), Indefinite Delivery Indefinite Quantity (IDIQ), and/or

Blanket Purchase Agreement (BPA)?

If so, please identify the contract number for the government to review as part of this Market

Research.

4. Opportunity/Market Pricing: MEDVAMC is seeking information from potential vendors on

their ability to provide the required items/equipment. THIS IS A SOURCES SOUGHT

REQUEST FOR INFORMATION (RFI) ONLY. Small Business concerns are encouraged to

provide responses to this RFI in order to assist the MEDVAMC in determining potential levels of

competition and general market pricing available in the industry. Vendors are requested to

submit estimated market research pricing along with their responses to the above. The

estimated pricing will be considered when determining the procurement strategy for the

forthcoming solicitation. Contractor shall provide answers to all questions requested and shall

possess the ability to provide all requirements and objectives per the DRAFT STATEMENT OF

OBJECTIVES.

5. RFI responses are due by 11:00 am Central Standard Time on June 18, 2026; size is

limited to 8.5 x 11 inches, 12-point font, with 1-inch margins in Microsoft Word format via email

to tabitha.crosby@va.gov

The subject line shall read: RFI 36C25626Q0922 Hot Water Heaters.

NO SOLICITATION EXISTS AT THIS TIME.

There is no page limitation on subparagraphs 3(a) - 3(g). Please provide the information you

deem relevant in order to respond to the specific inquiries of the RFI. Information provided will

be used solely by MEDVAMC as Market Research and will not be released outside of the

MEDVAMC Purchasing and Contracting Team.

6. Contact Information:

Tabitha Crosby

tabitha.crosby@va.gov

See attached document: Statement of Objectives Hot Water Heaters