2500amp Busway and Combiner Cab

Closed Solicitation Posted

This opportunity was awarded. See the award notice from .

Solicitation number
W56HZV-23-R-L089
Agency
TACOM Life Cycle Management Command Army Materiel Command, Department of Defense
Responses due
Set-aside
No set-aside

Opportunity facts

NAICS code
238210 Electrical Contractors and Other Wiring Installation Contractors
PSC
K059 Modification Of Equipment- Electrical And Electronic Equipment Components
Place of performance
Warren, Michigan, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The U.S. Army Materiel Command TACOM Life Cycle Management Command seeks design-build proposals to design, fabricate, furnish and install five fused disconnects, two DC combiner cabinets rated at 1000 volts and 2500 amps each, and two busways at the Army's Test Cells 4 and 5 located in Warren, Michigan. Proposals are due January 25, 2024 and must meet all material, equipment, and labor requirements to complete the installation per the 2020 NEC and industry standards. Conceptual design drawings are provided for reference and questions are due by November 13, 2023 with responses by November 16, 2023.

There is no set-aside designation for this opportunity. The primary NAICS code is 238210 and PSC code is R499. The place of performance is Warren, MI and the contractor must complete design within 120 days of award, deliver materials within 360 days, and complete installation within 540 days. Key requirements include 2500 amp capacity and 1000 volt rating for the busways and combiner cabinets.

Notice text

3 versions

Update #3 · Latest ·

C. 1 Project Description:

Installation of Direct Current (DC) Busway & Combiner Cabinets for Test Cell 4 &5 rated at 1000volt, 2500amp, Circuit Breaker protected at 2000amp.

C.2 Objective

The US Army Ground Vehicle Systems Center (GVSC) intends to complete the following project per the requirements below. The Government is requesting a Design/Build proposal for the design, fabrication, and installation of a DC Busway & Combiner Cabinets for Test Cell 4 &5 rated at 1000volt, 2500amp.

The Contractor shall provide a design/build proposal to design, fabricate, furnish, and install, five (5) fused Disconnects, two (2) DC combiner cabinets, and two (2) busways rated at 1000volts, 2500amp each into Test Cell 4 & Test Cell 5 per the 2020 edition of the National Fire Protection Association (NFPA) 70, the NEC (National Electrical Code), and industry standards. The Contractor shall provide all materials, equipment, rigging, and labor to install per the specifications and requirements below.

Government supplied conceptual design drawings are provided as reference documents in the attachment. The conceptual design includes the intent of design and approximate locations of equipment.

If a site visit is required please notify Rodolfo Hernandez at rodolfo.hernandez-diaz.civ@army.mil by 17 January 2024 to arrange a site visit date.

Questions are due by 19 January 2024 at 14:00 hours to Rodolfo Hernandez at rodolfo.hernandez-diaz.civ@army.mil.

Responses to questions will be provided by 23 Janury 2024

Update #2 ·

C.1. Objectives: C.1.1. The US Army GVSC Ground vehicle systems center intends to complete the following project per the requirements below. The government is requesting a Design/Build proposal for the design, fabrication and installation of a DC Busway & Combiner Cabinets for Test Cell 4 &5 rated at 1000volt, 2500amp.
C.1.2. Contractor to provide a design/build proposal to design, fabricate, furnish and install, (5) fused Disconnects, (2) DC combiner cabinets and (2) busways rated at 1000volts, 2500amp each into Test Cell 4 & Test Cell 5 per 2020 edition of the NFPA 70, NEC (national electrical code) and industry standards.
C.1.3. The contractor shall provide all materials, equipment, rigging, and labor to install per the specifications and requirements below.
C.1.4. Government supplied conceptual design drawings are provided as reference documents in the attachment. Includes intent of design and approximate locations of equipment.

If a site visit is required please notify Rodolfo Hernandez at rodolfo.hernandez-diaz.civ@army.mil by 27 November 2023 to arrange a site visit date.

Questions are due by 13 November 2023 to Rodolfo Hernandez at rodolfo.hernandez-diaz.civ@army.mil.

Responses to questions will be provided by 16 November.

Update #1 ·

C.1. Objectives: C.1.1. The US Army GVSC Ground vehicle systems center intends to complete the following project per the requirements below. The government is requesting a Design/Build proposal for the design, fabrication and installation of a DC Busway & Combiner Cabinets for Test Cell 4 &5 rated at 1000volt, 2500amp.
C.1.2. Contractor to provide a design/build proposal to design, fabricate, furnish and install, (5) fused Disconnects, (2) DC combiner cabinets and (2) busways rated at 1000volts, 2500amp each into Test Cell 4 & Test Cell 5 per 2020 edition of the NFPA 70, NEC (national electrical code) and industry standards.
C.1.3. The contractor shall provide all materials, equipment, rigging, and labor to install per the specifications and requirements below.
C.1.4. Government supplied conceptual design drawings are provided as reference documents in the attachment. Includes intent of design and approximate locations of equipment.

If a site visit is required please notify Rodolfo Hernandez at rodolfo.hernandez-diaz.civ@army.mil by 02 November 2023 to arrange a site visit date.

Questions are due by 13 November 2023 to Rodolfo Hernandez at rodolfo.hernandez-diaz.civ@army.mil.

Responses to questions will be provided by 16 November.

Attachments

Notice history

Notices posted for this opportunity, newest first
Notice Type Posted
2500amp Busway and Combiner Cab Award Award Notice
2500amp Busway and Combiner Cab This notice · Latest solicitation Solicitation

On GovTribe

Work this opportunity on GovTribe

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity