24 Small UAS kits and 3D print files
Closed Solicitation Posted
- Solicitation number
- W912JV26QA011
- Agency
-
Oregon National Guard
Army National Guard, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 336411 Aircraft Manufacturing
- PSC
- 1550 Unmanned Aircraft
- Place of performance
- HQ 249TH Regt (RTI), 78080 Ordnance Road, Hermiston Or 97838 97838
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Oregon National Guard seeks 24 small UAS kits and 3D print files to support the Regional Training Institute, with proposals due May 19, 2026 at 11:00 AM. The procurement is a total small business set-aside and is issued as a Request for Quote (RFQ) under solicitation number W912JV26QA0110001 by the Crater Lake Regional Contracting Office.
Place of performance is Hermiston, Oregon (HQ 249th Regiment, RTI); the contractor bears transportation costs with FOB Destination. The NAICS code is 336411, Aircraft Manufacturing, and the PSC code is 1550, Unmanned Aircraft.
Each airframe kit must weigh 20 pounds or less with all flight components and battery included, feature a modular design enabling tool-less replacement of flight hardware and propulsion assemblies in one minute or less, be additively manufactured from composite ABS glass fiber-reinforced filament with folding motor arms and positive retention mechanisms, include an 11.9MP RGB camera with gimbal capability and infrared camera integration support, and deliver command/control range of 10 kilometers or greater. Kits must comply with NDAA requirements for critical components including flight controllers, radios, and data transmission devices and support three mission profiles: ISR at 45 knots with 30+ minutes endurance carrying 1kg payload, High Speed Attack at 70 knots with 15+ minutes endurance, and Heavy Lift at 35 knots with 20+ minutes endurance carrying 3kg payload. Each kit includes replacement propellers, two lithium-ion batteries, battery charger, and complete 3D print files. Ground control stations must weigh 1 kilogram or less, feature an 8+ inch Android 11 touchscreen with 2+ hours battery life, support 900 MHz and 2.4 GHz ISM band frequencies, and enable mission reconfiguration and payload control. Delivery is required by September 1, 2026. Evaluation uses price and past performance; quotes with Red or Yellow past performance ratings are unacceptable. The contracting officer is Robert Bates (robert.c.bates26.civ@army.mil); the unit point of contact is SFC Colton Chase (971-355-7820).
Notice text
2 versions
Update #2 · Latest ·
The requirement is for 24 small UAS kits and 3D print files to support the Regional Training Institute (RTI), Oregon National Guard. See attached Statement of Requirement for additional details
Update #1 ·
The requirement is for 24 small UAS kits and 3D print files to support the Regional Training Institute (RTI), Oregon National Guard. See attached Statement of Requirement for additional details
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Uncrewed aircraft systems instruction, maintenance & mission support (UAS-imms) | ACC Orlando | No set-aside | |
| Drone | MICC Fort Drum | Total Small Business | |
| Recoverable Small Unmanned Aircraft Systems for Frontline Operational Awareness and Surveillance Missions | Office of Procurement Operations | No set-aside | |
| Request for Information - Small Uncrewed Aerial System (sUAS) Capabilities | AFLCMC Wright Patterson AFB | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity