15 Foot offset flex arm for Bat Wing mowers
Closed Solicitation Posted
- Solicitation number
- W911S226U4437
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333618 Other Engine Equipment Manufacturing
- Place of performance
- 4525 Camp Hale Rd. Fort Drum, NY 13602 13602
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum seeks a 15-foot offset flex arm rotary cutter for Bat Wing mowers, with proposals due September 16. The procurement is a Total Small Business set-aside.
Place of performance is Fort Drum, New York. The equipment must feature heavy-duty 11L by 15, 12-ply tires with a minimum 4,000-pound load capacity and must cut directly in-line with the tractor or at any offset distance up to 122 inches. The assembly requires a minimum 2.5-inch castor pivot shaft, six-bolt hubs with at least 6,000-pound capacity, and bolt-in replaceable axles. Major pivot points must utilize spring steel tension bushings and induction-hardened pins. Hydraulic configuration requires a minimum of four independent circuits with a heavy-duty 3.5-by-36-inch welded hydraulic cylinder; an optional six-port selector valve kit is required for independent wing action on tractors with limited hydraulic outlets. Power delivery must accommodate a minimum 200 horsepower at 1,000 RPM and 540 RPM power from the tractor. A safety lighting kit is required. Operating width is 121 inches total with standard dimensions of 70 inches left and 52 inches right of the tractor; with stop block installed on the transport lock bar, dimensions are configured to 55 inches left and 66 inches right. The NAICS code is 333618, Other Engine Equipment Manufacturing; PSC is 3590, Miscellaneous Service and Trade Equipment.
Notice text
The 15-foot offset flex arm rotary cutter requires heavy-duty 11L by 15, 12-ply tires with a minimum load capacity of 4,000 pounds. It must be capable of cutting directly in-line with the tractor or at any offset distance up to 122 inches (10.16 feet). The assembly requires a minimum two-and-a-half-inch castor pivot shaft, six-bolt hubs with at least a 6,000-pound capacity, and bolt-in replaceable axles. Major pivot points must utilize spring steel tension bushings and induction-hardened pins. Hydraulic and mechanical requirements include a minimum of four hydraulic circuits with independent wing lift for the 15-foot mower, a heavy-duty three-and-a-half by 36-inch welded hydraulic cylinder, and an optional six-port selector valve kit for independent wing action on tractors with limited hydraulic outlets. Power delivery requires a minimum rating of 200 horsepower at 1,000 RPM while accommodating 540 RPM power delivery from the tractor. A safety lighting kit is also required. Standard travel dimensions must maintain a maximum width of 70 inches to the left of the tractor and 52 inches to the right, totaling 121 inches for the arm and rotary cutter assembly. When operating with the stop block installed on the transport lock bar designed to improve clearance for oncoming traffic on narrow roads the dimensions are configured to 55 inches to the left of the tractor and 66 inches to the right (totaling 121 inches).
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Airfield Equipment Transportation and Maintenance Preparation | MICC Fort Drum | Total Small Business | |
| 10th CAB Unit Maintained Equipment Maintenance | MICC Fort Drum | Competitive 8(a) | |
| Circular Saw | MICC Fort Drum | Total Small Business | |
| Forest Improvement Herbicide- Fort Drum | MICC Fort Drum | Total Small Business | |
| UTV Trailer | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity