WPGC_IrrPlans_11_1_24.pdf
PDF 18 MB Posted
- Solicitation number
- PE-64850-NONST-2025-000000026
- Issued by
- Douglas County, Georgia
About this file
This is an irrigation system upgrade project plan set for West Pines Golf Club in Douglasville, Georgia (RFB 2024-106), dated November 1, 2024. The project involves replacing sprinklers and installing new irrigation controls across the golf course practice range, including installation of 531 new sprinklers (327 full circle 80' spacing, 79 part circle 80' spacing, 79 part circle 65'-70' spacing, and 46 full circle 90' spacing sprinklers). The plans detail comprehensive irrigation and wiring layouts across 10 sheets, including overall irrigation plans, detailed irrigation plans for specific areas, wiring plans, and technical installation details. The project utilizes a Toro Lynx control system with smart hubs and requires installation of new controllers, decoders, and associated electrical infrastructure.
The technical specifications require minimum 20" cover for mainlines and sub-main pipes, specific wire connection methods using waterproof connectors, and detailed grounding requirements for the electrical systems. The project includes extensive trenching work for new irrigation lines and electrical conduits, with requirements for proper compaction and restoration of cart paths and turf areas. Questions and assistance requests should be directed to Alyssa Gordon, Senior Accounting Specialist, and all firms must monitor Bidnet Direct for updates and clarifications.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Pre_bid meeting sign in sheet 12_17_24.pdf | ||
| RFB 2024_016 West Pines GC Sprinkler Replacem.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1080 1090
1150 1130
121314
Practice Range
Golf Irrigation Sprinklers Replacement and
New Irrigation Controls Project
RFB 2024-106
November 1, 2024
West Pines Golf Club Douglasville, Georgia
Madison, GA 30650
(770) 929-0884
2129 Greensboro Rd
Consultant Services
Irrigation
Irrigation Plan Irrigation Plan Irrigation Plan Overall Irrigation Plan
SHEET INDEX
Irrigation Details Overall Irrigation Wiring Plan Irrigation Wiring Plan
IR-1
IR-2
IR-3
IR-4
IR-5
IR-6
IR-7
Irrigation Wiring Plan IR-8 Irrigation Wiring Plan IR-9 Irrigation Wiring Details IR-10
Bid Notes Please contact Alyssa Gordon, Senior Accounting Specialist at gordona@douglasvillega.gov if further assistance is needed.
All firms are responsible for checking Bidnet Direct at https://www.bidnetdirect.com on a regular basis for updates, clarifications, and announcements.
1080 1090
1150 1130
121314
Practice Range
Toro Lynx Central Controls
#2
#5 Toro Lynx Smart Controller
Existing Practice Range Control Wires
#4
#1
#3
Natural Gas Tracking Power Source
Natural Gas Line
Natural Gas Line
6-1-3 6-2-3
6-3-3
6-4-3
6-5-3
6-6-3
6-7-3
6-8-3
6-9-4 6-10-4
6-11-4
6-12-4 6-13-4 6-14-4
6-15-3
6-16-3
6-17-3
6-18-3
6-19-3
6-20-3
6-21-3
6-22-3
6-23-3
6-24-3
6-25-3
6-26-3
6-27-3
6-28-3
6-29-3
6-30-3
6-31-3
6-32-3
6-33-3 6-34-3
5-1-4 5-2-4
5-3-4
5-4-4
5-5-4 5-6-4
5-7-4
5-8-4
5-9-1 5-10-1
5-11-1 5-12-1
5-13-1
5-14-4
5-15-4
5-16-4
5-17-4
5-18-4
5-19-4
18-1-1
18-2-1
18-3-1
18-4-1
18-5-1
18-6-1
18-7-1
18-8-1
18-9-5 18-10-5
18-11-5
18-12-5
18-13-5
18-14-5
18-15-5
18-16-5
18-17-5
18-18-5
18-19-5
18-20-5
18-21-5
18-22-5
18-23-5
18-24-5 18-25-5
18-26-5
18-27-5
18-28-5
18-29-5
18-30-5 18-31-5
18-32-5
18-33-5
3-1-1
3-2-1 3-3-1
3-4-1 3-5-1
3-6-1 3-7-1
3-8-1
3-9-1
3-10-1
3-12-1
3-11-1
3-13-1 3-14-1
3-15-1 3-16-1
3-17-1 3-18-1
3-19-1
1-1-4
1-2-4 1-3-4
1-4-4
1-5-4
1-6-4
1-7-4
1-8-4
1-9-4
1-10-4
1-11-4
1-12-4
1-13-4
1-14-4
1-15-4 1-16-4
1-17-4 1-18-4
1-19-4 1-20-4
1-21-4 1-22-4
1-23-4 1-24-4
1-25-4 1-26-4
1-27-4 1-28-4
1-29-4 1-30-4
1-31-4 1-32-4
1-33-4 1-34-4
1-35-4 1-36-4
15-1-4
15-2-4
15-3-4
15-4-4
15-5-4
15-6-4
15-7-4
15-8-4
15-9-4 15-10-4 15-11-4
15-12-4
15-13-4
15-14-4
15-15-4
15-16-4
15-17-4
16-1-4
16-2-4
16-3-4
16-4-4
16-5-4
16-6-4
16-7-4
16-8-4
16-9-4
16-10-4
16-11-4
16-12-4
16-13-4
16-14-4
16-15-4
16-16-4
16-17-4
16-18-4
16-19-4
16-20-4 16-21-4
16-22-4
16-23-4
16-24-4 16-25-4
16-26-4
16-27-4
16-28-4 16-29-4
16-30-4
16-31-4
16-32-4
16-33-4
17-1-5
17-2-5
17-3-5
17-4-5
17-5-5
17-6-5
17-7-5
17-8-5
17-9-5
17-10-5
17-11-5
17-12-5
17-13-5
17-14-5
17-15-5
17-16-5
17-17-5
17-18-5 17-19-5
17-20-5
17-21-5
17-22-5
17-23-5
17-24-5
17-25-5
17-26-5
17-27-5
17-28-5
17-29-5
17-30-5
17-31-5
17-32-5
17-33-5
17-34-5 17-35-5
17-36-5 17-37-5
4-1-1
4-2-1 4-3-1
4-4-1 4-5-1
4-6-1
4-7-1
4-8-1
4-9-1
4-10-1
4-11-1
4-12-1
4-13-1
4-14-1
4-15-1
4-16-1 4-17-1
4-18-1 4-19-1
4-20-1 4-21-1
4-22-1 4-23-1
4-24-1 4-25-1
4-26-1
4-27-1
4-28-1 4-29-1
4-30-1
4-31-1
4-32-1 4-33-1
4-34-1 4-35-1
4-36-1 4-37-1
4-38-1
2-1-1
2-2-1
2-3-1 2-4-1
2-5-1
2-6-1
2-7-1
2-8-1
2-9-1
2-10-1
2-11-1
2-12-1
2-13-1
2-14-1
2-15-1
2-16-1
2-17-1 2-18-1
2-19-1 2-20-1
2-21-1 2-22-1
2-23-1 2-24-1
2-25-1 2-26-1
2-27-1 2-28-1
2-29-1 2-30-1
14-1-3
14-2-3
14-3-3
14-4-3
14-5-3
14-6-3
14-7-3
14-8-3
14-9-3 14-10-3
14-11-3 14-12-3 14-13-3
14-14-3
14-15-3
14-16-3
14-17-3
14-18-3
14-19-3
14-20-3
14-21-3
14-22-3
14-23-3
14-24-3
14-25-3
14-26-3
14-27-3
14-28-3
14-29-3
14-30-3
14-31-3
14-32-3
14-33-3
14-34-3
14-35-3
7-1-2 7-2-2
7-3-2
7-4-2
7-5-2
7-6-2
7-7-2
7-8-2
7-9-2
7-10-2 7-11-2
7-12-2
7-13-2
7-14-2
7-15-2
7-16-2
7-17-2
7-18-2
7-19-2
7-20-2
7-21-2
7-22-2
7-23-2
7-24-2
7-25-2
7-26-2
7-27-2
7-28-2
7-29-2
7-30-2
13-1-3 13-2-3
13-3-3 13-4-3
13-5-3 13-6-3
13-7-3 13-8-3
13-9-3 13-10-3
13-11-3 13-12-3 13-13-3
13-14-3
13-15-3
13-16-3
13-17-3
13-18-3
13-19-3
13-20-3
13-21-3
13-22-3
13-23-3
13-24-3
13-25-3
13-26-3
13-27-3
13-28-3
13-29-3
13-30-3
13-31-3
13-32-3
13-33-3
8-1-3
8-2-3
8-3-3
8-4-3
8-5-3
8-6-3
8-7-3
8-8-3
8-9-3 8-10-3 8-11-3
8-12-3
8-13-3
8-14-3
8-15-3
8-16-3
8-17-3
8-18-3
8-19-3
8-20-3
8-21-3
8-22-3
8-23-3
8-24-3
8-25-3
8-26-3
8-27-3
8-28-3
8-29-3
8-30-3
8-31-3
8-32-3
8-33-3 8-34-3
8-35-3 8-36-3
8-37-3
8-38-3
8-39-3
9-1-2 9-2-2
9-3-2 9-4-2
9-5-2
9-6-2
9-7-2
9-8-2
9-9-2
9-10-2 9-11-2
9-12-2
9-13-2
9-14-2
9-15-2
9-16-2
9-17-2
9-18-2 9-19-2
9-20-2
9-21-2
9-22-2
9-23-2
9-24-2
9-25-2
9-26-2
9-27-2
9-28-2
9-29-2
10-1-2
10-2-2 10-3-2
10-4-2 10-5-2
10-6-2
10-7-2
10-8-2
10-9-2
10-10-2
10-11-2
10-12-2
10-13-2
10-14-2
11-1-2 11-2-2
11-3-2
11-4-2
11-5-2 11-6-2
11-7-2
11-8-2
11-9-2 11-10-2 11-11-2 11-12-2
11-13-2 11-14-2 11-15-2
11-16-2
11-17-2
11-18-2
11-19-2
11-20-2
11-21-2
11-22-2
11-23-2
11-24-2
11-25-2
11-26-2
11-27-2
11-28-2
11-29-2
12-1-2
12-2-2 12-3-2
12-4-2
12-5-2
12-6-2
12-7-2 12-8-2
12-9-2
12-10-2
12-11-2
12-12-2
12-13-2
12-14-2
12-15-2 12-16-2
12-17-2 12-18-2
12-19-2 12-20-2
12-21-2 12-22-2
12-23-2 12-24-2
12-25-2 12-26-2
Sheet of
M ad is on
, G A
Ph
0)
-0
G re en sb or o
R d
C on su lta nt Se rv ic es
Ir rig at io n
R ev is io ns D at e
D es cr ip tio n
N o.
Sc al e:
D ra w n by
D at e:
Fi le na m e:
C hk
'd B y:
W es t P in es G ol f C lu b
D ou gl as vi lle
, G eo rg ia
O ve ra ll
Ir rig at io n Pl an
IR-1
1 10
1"
/1
/2
IC
S
IC
S ia
Scale: 1"=200'
100' 200' 400' 600'
North
IRRIGATION SPRINKLER LEGEND/SPRINKLER COUNT
SYMBOL ITEM SPRINKLER COUNTS
FULL CIRCLE - 80' SPACING 327
-TORO INF55-578-66
PART CIRCLE - 80' SPACING 79
-TORO INF55-578-66
PART CIRCLE - 65'-70' SPACING 79
-TORO INF35-356-66
FULL CIRCLE - 90' SPACING 46
-TORO INF55-598-66
TOTAL: 531
-ALL SPRINKLERS TO UTILIZE A NEW 1 12 ” OR 1" ACME
UNITIZED SWING JOINT ASSEMBLY.
-SUBJECT TO FIELD NOZZLE CHANGE AS PER
FIELD STAKING BY IRRIGATION CONSULTANT,
AT NO ADDITIONAL COST TO OWNER.
LOCATE/REMOVE CAP EXISTING GOLF ROTOR
INSTALLER NOTES:
1. INSTALLER SHALL BE RESPONSIBLE TO LOCATE ALL EXISTING IRRIGATION
COMPONENTS, UTILITIES, AND DRAINAGE INCLUDING WIRE AND PIPE
LOCATING. ALSO LOCATING OF ALL EXISTING UTILITIES. THE INSTALLER
IS RESPONSIBLE TO REPAIR ALL EXISTING IRRIGATION SYSTEM
COMPONENTS AND UTILITIES.
2. INSTALLER SHALL CUT AND REPAIR ALL CART PATH CROSSINGS AS PER
OWNER'S APPROVED METHOD.
3. ALL LINES TO BE THOROUGHLY FLUSHED BEFORE INSTALLATION OF
SPRINKLERS.
4. INSTALLER SHALL COMPACT ALL TRENCHES IN 6 INCH LIFT WITH DIRT
COMPACTOR FOR NO SETTLEMENT.
5. CONTRACTOR SHALL REMOVE, DISPOSE, AND REPAIR CART PATHS.
6. CONTRACTOR SHALL REMOVE ALL SPOILS TO DESIGNATED AREA ON
SITE.
GENERAL NOTES:
1. ALL MAINLINES AND SUB-MAIN PIPE TO HAVE A MINIMUM OF 20" COVER.
2. NO ROCKS, BOULDERS, OR OTHER EXTRANEOUS MATERIALS TO BE USED IN BACKFILLING OF TRENCH.
3. ALL THREADED JOINTS TO BE COATED WITH TEFLON TAPE ONLY, IF NOT ACME THREADED.
4. ALL LINES TO BE THOROUGHLY FLUSHED BEFORE INSTALLATION OF SPRINKLERS.
5. 120 VOLT - 460 VOLT POWER WIRE TO BE INSTALLED AS PER LOCAL CODE.
6. SPRINKLERS AND RELATED EQUIPMENT TO BE INSTALLED AS PER DETAILS.
7. ALL ELECTRICAL JOINTS TO BE MADE USING WATERPROOF CONNECTIONS AS PER MANUFACTURER'S APPROVED METHOD.
8. ALL EQUIPMENT NOT SPECIFIED IN THE LEGEND SHALL BE DETERMINED AND FURNISHED BY THE CONTRACTOR.
9. CONTRACTOR TO PROVIDE CIRCUIT BREAKER BOX AT 120 VOLT SOURCE LOCATIONS FOR POWER TO AUTO-CONTROLLERS
UNLESS EXISTING BREAKERS ARE AVAILABLE.
10. NO ELECTRICAL CONNECTIONS SHALL BE MADE IN THE FIELD EXCEPT AT A VAKVE IN HEAD SPRINKLER OR ANOTHER VALVE
BOX SPECIFICALLY FOR CONNECTIONS.
11. ANY DISCREPANCY BETWEEN THIS SHEET AND OTHERS IN THIS SET MUST BE REFERRED TO THE IRRIGATION CONSULTANT
BY THE CONTRACTOR FOR CLARIFICATION BEFORE PROCEEDING WITH THE WORK.
12. ALL WIRING TO BE UL RATED FOR DIRECT BURIAL, SIZED AS PER PLANS.
13. 120 VOLT POWER WIRE CONNECTIONS SHALL BE ACCOMPLISHED USING PAIGE 3M SCOTCH CAST 8882 RE-ENTERABLE
RESIN CONNECTION ASSEMBLY. ALL OTHERS SHALL UTILIZE DBY OR DBR (TORO RESIN PACK ONLY).
14. INSTALLER IS RESPONSIBLE TO LOWER ALL SPRINKLERS TO APPROVED CONDITIONS BY IRRIGATION CONSULTANT BEFORE
FINAL ACCEPTANCE.
15. ALL SWING JOINTS SHALL BE ACME THREAD FROM THE SERVICE TEE AND THE INLET OF SPRINKLERS
16. INSTALLER SHALL REMOVE AND REPLACE SOD ON ALL TRENCHLINES. IF SOD IS NOT REPLACEABLE, INSTALLER WILL BE
RESPONSIBLE TO INSTALL NEW SOD.
17. ALL PRODUCT APPLICATIONS AND INSTALLATIONS MUST MEET MANUFACTURER'S REQUIREMENTS.
18. IRRIGATION PLANS SHALL HAVE PRECEDENCE OVER IRRIGATION SPECIFICATIONS. ANY DISCREPANCIES BETWEEN THESE
TWO DOCUMENTS MUST BE BROUGHT TO THE ATTENTION OF THE IRRIGATION CONSULTANT BEFORE INSTALLATION.
19. IT IS THE INTENT TO KEEP IRRIGATION WATER OFF OF ALL BUILDINGS, SIDEWALKS AND PARKING AREAS. IT WILL BE THE
RESPONSIBILITY OF THE IRRIGATION CONTRACTOR TO FIELD TUNE EACH SPRINKLE AS TO KEEPING IRRIGATION ADJUSTED
TO GRASSED AND SEEDED AREAS ONLY.
SEE SHEETS
IR-2/IR-7
SEE SHEETS
IR-3/IR-8
SEE SHEETS
IR-4/IR-9
IRRIGATION HYDRAULIC/ PROGRAMMING PLAN LEGEND
SYMBOL ITEM
EXISTING PUMPING SYSTEM RENOVATION
PROGRAM IDENTIFICATION NUMBER
(HOLE - ZONE # - SMART HUB #)18-10-5
1" long line SHEET SIZE 24"x36"
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text
CC
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text I
AutoCAD SHX Text F
AutoCAD SHX Text I
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text A
AutoCAD SHX Text S
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text B
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text G
AutoCAD SHX Text C
AutoCAD SHX Text 074483
Practice Range
#5 Toro Lynx Smart Controller
Existing Practice Range Control Wires
#4
#1
Natural Gas Tracking Power Source
Natural Gas Line
6-13-4 6-14-4 6-16-3
6-18-3
5-1-4 5-2-4
5-3-4
5-4-4
5-5-4 5-6-4
5-7-4
5-8-4
5-9-1 5-10-1
5-11-1 5-12-1
5-13-1
5-14-4
5-15-4
5-16-4
5-17-4
5-18-4
5-19-4
18-1-1
18-2-1
18-3-1
18-4-1
18-5-1
18-6-1
18-7-1
18-8-1
18-9-5 18-10-5
18-11-5
18-12-5
18-13-5
18-14-5
18-15-5
18-16-5
18-17-5
18-18-5
18-19-5
18-20-5
18-21-5
18-22-5
18-23-5
18-24-5 18-25-5
18-26-5
18-27-5
18-28-5
18-29-5
18-30-5 18-31-5
18-32-5
18-33-5
3-1-1
3-2-1 3-3-1
3-4-1 3-5-1
3-6-1 3-7-1
3-8-1
3-9-1
3-10-1
3-12-1
3-11-1
3-13-1 3-14-1
3-15-1 3-16-1
3-17-1 3-18-1
3-19-1
1-1-4
1-2-4 1-3-4
1-4-4
1-5-4
1-6-4
1-7-4
1-8-4
1-9-4
1-10-4
1-11-4
1-12-4
1-13-4
1-14-4
1-15-4 1-16-4
1-17-4 1-18-4
1-19-4 1-20-4
1-21-4 1-22-4
1-23-4 1-24-4
1-25-4 1-26-4
1-27-4 1-28-4
1-29-4 1-30-4
1-31-4 1-32-4
1-33-4 1-34-4
1-35-4 1-36-4
16-1-4
16-2-4
16-3-4
16-4-4
16-5-4
16-6-4
16-7-4
16-8-4
16-15-4
16-16-4
16-17-4
16-18-4
16-19-4
16-20-4 16-21-4
16-22-4
16-23-4
16-24-4 16-25-4
16-26-4
16-27-4
16-28-4 16-29-4
16-30-4
16-31-4
16-32-4
16-33-4
17-1-5
17-2-5
17-3-5
17-4-5
17-5-5
17-6-5
17-7-5
17-8-5
17-9-5
17-10-5
17-11-5
17-12-5
17-13-5
17-14-5
17-15-5
17-16-5
17-17-5
17-18-5 17-19-5
17-20-5
17-21-5
17-22-5
17-23-5
17-24-5
17-25-5
17-26-5
17-27-5
17-28-5
17-29-5
17-30-5
17-31-5
17-32-5
17-33-5
17-34-5 17-35-5
17-36-5 17-37-5
4-1-1
4-2-1 4-3-1
4-4-1 4-5-1
4-6-1
4-7-1
4-8-1
4-9-1
4-10-1
4-11-1
4-12-1
4-13-1
4-14-1
4-15-1
4-16-1 4-17-1
4-18-1 4-19-1
4-20-1 4-21-1
4-22-1 4-23-1
4-24-1 4-25-1
4-26-1
4-27-1
4-28-1 4-29-1
4-30-1
4-31-1
4-32-1 4-33-1
4-34-1 4-35-1
4-36-1 4-37-1
4-38-1
2-1-1
2-2-1
2-3-1 2-4-1
2-5-1
2-6-1
2-7-1
2-8-1
2-9-1
2-10-1
2-11-1
2-12-1
2-13-1
2-14-1
2-15-1
2-16-1
2-17-1 2-18-1
2-19-1 2-20-1
2-21-1 2-22-1
2-23-1 2-24-1
2-25-1 2-26-1
2-27-1 2-28-1
2-29-1 2-30-1
Sheet of
M ad is on
, G A
Ph
0)
-0
G re en sb or o
R d
C on su lta nt Se rv ic es
Ir rig at io n
R ev is io ns D at e
D es cr ip tio n
N o.
Sc al e:
D ra w n by
D at e:
Fi le na m e:
C hk
'd B y:
W es t P in es G ol f C lu b
D ou gl as vi lle
, G eo rg ia
Ir rig at io n Pl an
IR-2
2 10
1"
/1
/2
IC
S
IC
S ia
Scale: 1"=100'
50' 100' 200' 300'
North
GENERAL NOTES:
1. ALL MAINLINES AND SUB-MAIN PIPE TO HAVE A MINIMUM OF 20" COVER.
2. NO ROCKS, BOULDERS, OR OTHER EXTRANEOUS MATERIALS TO BE USED IN BACKFILLING OF TRENCH.
3. ALL THREADED JOINTS TO BE COATED WITH TEFLON TAPE ONLY, IF NOT ACME THREADED.
4. ALL LINES TO BE THOROUGHLY FLUSHED BEFORE INSTALLATION OF SPRINKLERS.
5. 120 VOLT - 460 VOLT POWER WIRE TO BE INSTALLED AS PER LOCAL CODE.
6. SPRINKLERS AND RELATED EQUIPMENT TO BE INSTALLED AS PER DETAILS.
7. ALL ELECTRICAL JOINTS TO BE MADE USING WATERPROOF CONNECTIONS AS PER MANUFACTURER'S APPROVED METHOD.
8. ALL EQUIPMENT NOT SPECIFIED IN THE LEGEND SHALL BE DETERMINED AND FURNISHED BY THE CONTRACTOR.
9. CONTRACTOR TO PROVIDE CIRCUIT BREAKER BOX AT 120 VOLT SOURCE LOCATIONS FOR POWER TO AUTO-CONTROLLERS
UNLESS EXISTING BREAKERS ARE AVAILABLE.
10. NO ELECTRICAL CONNECTIONS SHALL BE MADE IN THE FIELD EXCEPT AT A VAKVE IN HEAD SPRINKLER OR ANOTHER VALVE
BOX SPECIFICALLY FOR CONNECTIONS.
11. ANY DISCREPANCY BETWEEN THIS SHEET AND OTHERS IN THIS SET MUST BE REFERRED TO THE IRRIGATION CONSULTANT
BY THE CONTRACTOR FOR CLARIFICATION BEFORE PROCEEDING WITH THE WORK.
12. ALL WIRING TO BE UL RATED FOR DIRECT BURIAL, SIZED AS PER PLANS.
13. 120 VOLT POWER WIRE CONNECTIONS SHALL BE ACCOMPLISHED USING PAIGE 3M SCOTCH CAST 8882 RE-ENTERABLE
RESIN CONNECTION ASSEMBLY. ALL OTHERS SHALL UTILIZE DBY OR DBR (TORO RESIN PACK ONLY).
14. INSTALLER IS RESPONSIBLE TO LOWER ALL SPRINKLERS TO APPROVED CONDITIONS BY IRRIGATION CONSULTANT BEFORE
FINAL ACCEPTANCE.
15. ALL SWING JOINTS SHALL BE ACME THREAD FROM THE SERVICE TEE AND THE INLET OF SPRINKLERS
16. INSTALLER SHALL REMOVE AND REPLACE SOD ON ALL TRENCHLINES. IF SOD IS NOT REPLACEABLE, INSTALLER WILL BE
RESPONSIBLE TO INSTALL NEW SOD.
17. ALL PRODUCT APPLICATIONS AND INSTALLATIONS MUST MEET MANUFACTURER'S REQUIREMENTS.
18. IRRIGATION PLANS SHALL HAVE PRECEDENCE OVER IRRIGATION SPECIFICATIONS. ANY DISCREPANCIES BETWEEN THESE
TWO DOCUMENTS MUST BE BROUGHT TO THE ATTENTION OF THE IRRIGATION CONSULTANT BEFORE INSTALLATION.
19. IT IS THE INTENT TO KEEP IRRIGATION WATER OFF OF ALL BUILDINGS, SIDEWALKS AND PARKING AREAS. IT WILL BE THE
RESPONSIBILITY OF THE IRRIGATION CONTRACTOR TO FIELD TUNE EACH SPRINKLE AS TO KEEPING IRRIGATION ADJUSTED
TO GRASSED AND SEEDED AREAS ONLY.
INSTALLER NOTES:
1. INSTALLER SHALL BE RESPONSIBLE TO LOCATE ALL EXISTING IRRIGATION
COMPONENTS, UTILITIES, AND DRAINAGE INCLUDING WIRE AND PIPE
LOCATING. ALSO LOCATING OF ALL EXISTING UTILITIES. THE INSTALLER
IS RESPONSIBLE TO REPAIR ALL EXISTING IRRIGATION SYSTEM
COMPONENTS AND UTILITIES.
2. INSTALLER SHALL CUT AND REPAIR ALL CART PATH CROSSINGS AS PER
OWNER'S APPROVED METHOD.
3. ALL LINES TO BE THOROUGHLY FLUSHED BEFORE INSTALLATION OF
SPRINKLERS.
4. INSTALLER SHALL COMPACT ALL TRENCHES IN 6 INCH LIFT WITH DIRT
COMPACTOR FOR NO SETTLEMENT.
5. CONTRACTOR SHALL REMOVE, DISPOSE, AND REPAIR CART PATHS.
6. CONTRACTOR SHALL REMOVE ALL SPOILS TO DESIGNATED AREA ON
SITE.
IRRIGATION SPRINKLER LEGEND/SPRINKLER COUNT
SYMBOL ITEM SPRINKLER COUNTS
FULL CIRCLE - 80' SPACING 327
-TORO INF55-578-66
PART CIRCLE - 80' SPACING 79
-TORO INF55-578-66
PART CIRCLE - 65'-70' SPACING 79
-TORO INF35-356-66
FULL CIRCLE - 90' SPACING 46
-TORO INF55-598-66
TOTAL: 531
-ALL SPRINKLERS TO UTILIZE A NEW 1 12 ” OR 1" ACME
UNITIZED SWING JOINT ASSEMBLY.
-SUBJECT TO FIELD NOZZLE CHANGE AS PER
FIELD STAKING BY IRRIGATION CONSULTANT,
AT NO ADDITIONAL COST TO OWNER.
LOCATE/REMOVE CAP EXISTING GOLF ROTOR
1" long line SHEET SIZE 24"x36"
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text I
AutoCAD SHX Text F
AutoCAD SHX Text I
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text A
AutoCAD SHX Text S
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text B
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text G
AutoCAD SHX Text C
1080 1090
#4
Natural Gas Tracking Power Source
Natural Gas Line
6-1-3 6-2-3
6-3-3
6-4-3
6-5-3
6-6-3
6-7-3
6-8-3
6-9-4 6-10-4
6-11-4
6-12-4 6-13-4 6-14-4
6-15-3
6-16-3
6-17-3
6-18-3
6-19-3
6-20-3
6-21-3
6-22-3
6-23-3
6-24-3
6-25-3
6-26-3
6-27-3
6-28-3
6-29-3
6-30-3
6-31-3
6-32-3
6-33-3 6-34-3
5-1-4 5-2-4
5-3-4
5-4-4
5-5-4 5-6-4
5-7-4
5-8-4
5-9-1 5-10-1
5-11-1 5-12-1
5-13-1
5-14-4
5-15-4
5-16-4
5-17-4
5-18-4
5-19-4
1-1-4
1-2-4 1-3-4
1-4-4
1-5-4
1-6-4
1-7-4
1-8-4
15-1-4
15-2-4
15-3-4
15-4-4
15-5-4
15-6-4
15-7-4
15-8-4
15-9-4 15-10-4 15-11-4
15-12-4
15-13-4
15-14-4
15-15-4
15-16-4
15-17-4
16-9-4
16-10-4
16-11-4
16-12-4
16-13-4
16-14-4
16-15-4
16-16-4
16-17-4
16-18-4
16-19-4
16-20-4 16-21-4
16-22-4
16-23-4
16-24-4 16-25-4
2-11-1
14-1-3
14-2-3
14-3-3
14-4-3
14-5-3
14-6-3
14-7-3
14-8-3
14-9-3 14-10-3
14-11-3 14-12-3 14-13-3
14-14-3
14-15-3
14-16-3
14-17-3
14-18-3
14-19-3
14-20-3
14-21-3
14-22-3
14-23-3
14-24-3
14-25-3
14-26-3
14-27-3
14-28-3
14-29-3
14-30-3
14-31-3
14-32-3
14-33-3
14-34-3
14-35-3
7-1-2 7-2-2
7-3-2
7-4-2
7-5-2
7-6-2
7-7-2
7-8-2
7-9-2
7-10-2 7-11-2
7-12-2
7-13-2
7-14-2
7-15-2
7-16-2
7-17-2
7-18-2
7-19-2
7-20-2
7-21-2
7-22-2
7-23-2
7-24-2
7-25-2
7-26-2
7-27-2
7-28-2
7-29-2
7-30-2
13-1-3 13-2-3
13-3-3 13-4-3
13-5-3 13-6-3
13-7-3 13-8-3
13-26-3
13-27-3
13-28-3
13-29-3
13-30-3
13-31-3
13-32-3
13-33-3
8-9-3 8-10-3 8-11-3
8-12-3
8-13-3
8-14-3
8-15-3
8-16-3
8-17-3
8-18-3
10-9-2
10-10-2
10-11-2
10-12-2
Sheet of
M ad is on
, G A
Ph
0)
-0
G re en sb or o
R d
C on su lta nt Se rv ic es
Ir rig at io n
R ev is io ns D at e
D es cr ip tio n
N o.
Sc al e:
D ra w n by
D at e:
Fi le na m e:
C hk
'd B y:
W es t P in es G ol f C lu b
D ou gl as vi lle
, G eo rg ia
Ir rig at io n Pl an
IR-3
3 10
1"
/1
/2
IC
S
IC
S ia
Scale: 1"=100'
50' 100' 200' 300'
North
GENERAL NOTES:
1. ALL MAINLINES AND SUB-MAIN PIPE TO HAVE A MINIMUM OF 20" COVER.
2. NO ROCKS, BOULDERS, OR OTHER EXTRANEOUS MATERIALS TO BE USED IN BACKFILLING OF TRENCH.
3. ALL THREADED JOINTS TO BE COATED WITH TEFLON TAPE ONLY, IF NOT ACME THREADED.
4. ALL LINES TO BE THOROUGHLY FLUSHED BEFORE INSTALLATION OF SPRINKLERS.
5. 120 VOLT - 460 VOLT POWER WIRE TO BE INSTALLED AS PER LOCAL CODE.
6. SPRINKLERS AND RELATED EQUIPMENT TO BE INSTALLED AS PER DETAILS.
7. ALL ELECTRICAL JOINTS TO BE MADE USING WATERPROOF CONNECTIONS AS PER MANUFACTURER'S APPROVED METHOD.
8. ALL EQUIPMENT NOT SPECIFIED IN THE LEGEND SHALL BE DETERMINED AND FURNISHED BY THE CONTRACTOR.
9. CONTRACTOR TO PROVIDE CIRCUIT BREAKER BOX AT 120 VOLT SOURCE LOCATIONS FOR POWER TO AUTO-CONTROLLERS
UNLESS EXISTING BREAKERS ARE AVAILABLE.
10. NO ELECTRICAL CONNECTIONS SHALL BE MADE IN THE FIELD EXCEPT AT A VAKVE IN HEAD SPRINKLER OR ANOTHER VALVE
BOX SPECIFICALLY FOR CONNECTIONS.
11. ANY DISCREPANCY BETWEEN THIS SHEET AND OTHERS IN THIS SET MUST BE REFERRED TO THE IRRIGATION CONSULTANT
BY THE CONTRACTOR FOR CLARIFICATION BEFORE PROCEEDING WITH THE WORK.
12. ALL WIRING TO BE UL RATED FOR DIRECT BURIAL, SIZED AS PER PLANS.
13. 120 VOLT POWER WIRE CONNECTIONS SHALL BE ACCOMPLISHED USING PAIGE 3M SCOTCH CAST 8882 RE-ENTERABLE
RESIN CONNECTION ASSEMBLY. ALL OTHERS SHALL UTILIZE DBY OR DBR (TORO RESIN PACK ONLY).
14. INSTALLER IS RESPONSIBLE TO LOWER ALL SPRINKLERS TO APPROVED CONDITIONS BY IRRIGATION CONSULTANT BEFORE
FINAL ACCEPTANCE.
15. ALL SWING JOINTS SHALL BE ACME THREAD FROM THE SERVICE TEE AND THE INLET OF SPRINKLERS
16. INSTALLER SHALL REMOVE AND REPLACE SOD ON ALL TRENCHLINES. IF SOD IS NOT REPLACEABLE, INSTALLER WILL BE
RESPONSIBLE TO INSTALL NEW SOD.
17. ALL PRODUCT APPLICATIONS AND INSTALLATIONS MUST MEET MANUFACTURER'S REQUIREMENTS.
18. IRRIGATION PLANS SHALL HAVE PRECEDENCE OVER IRRIGATION SPECIFICATIONS. ANY DISCREPANCIES BETWEEN THESE
TWO DOCUMENTS MUST BE BROUGHT TO THE ATTENTION OF THE IRRIGATION CONSULTANT BEFORE INSTALLATION.
19. IT IS THE INTENT TO KEEP IRRIGATION WATER OFF OF ALL BUILDINGS, SIDEWALKS AND PARKING AREAS. IT WILL BE THE
RESPONSIBILITY OF THE IRRIGATION CONTRACTOR TO FIELD TUNE EACH SPRINKLE AS TO KEEPING IRRIGATION ADJUSTED
TO GRASSED AND SEEDED AREAS ONLY.
INSTALLER NOTES:
1. INSTALLER SHALL BE RESPONSIBLE TO LOCATE ALL EXISTING IRRIGATION
COMPONENTS, UTILITIES, AND DRAINAGE INCLUDING WIRE AND PIPE
LOCATING. ALSO LOCATING OF ALL EXISTING UTILITIES. THE INSTALLER
IS RESPONSIBLE TO REPAIR ALL EXISTING IRRIGATION SYSTEM
COMPONENTS AND UTILITIES.
2. INSTALLER SHALL CUT AND REPAIR ALL CART PATH CROSSINGS AS PER
OWNER'S APPROVED METHOD.
3. ALL LINES TO BE THOROUGHLY FLUSHED BEFORE INSTALLATION OF
SPRINKLERS.
4. INSTALLER SHALL COMPACT ALL TRENCHES IN 6 INCH LIFT WITH DIRT
COMPACTOR FOR NO SETTLEMENT.
5. CONTRACTOR SHALL REMOVE, DISPOSE, AND REPAIR CART PATHS.
6. CONTRACTOR SHALL REMOVE ALL SPOILS TO DESIGNATED AREA ON
SITE.
IRRIGATION SPRINKLER LEGEND/SPRINKLER COUNT
SYMBOL ITEM SPRINKLER COUNTS
FULL CIRCLE - 80' SPACING 327
-TORO INF55-578-66
PART CIRCLE - 80' SPACING 79
-TORO INF55-578-66
PART CIRCLE - 65'-70' SPACING 79
-TORO INF35-356-66
FULL CIRCLE - 90' SPACING 46
-TORO INF55-598-66
TOTAL: 531
-ALL SPRINKLERS TO UTILIZE A NEW 1 12 ” OR 1" ACME
UNITIZED SWING JOINT ASSEMBLY.
-SUBJECT TO FIELD NOZZLE CHANGE AS PER
FIELD STAKING BY IRRIGATION CONSULTANT,
AT NO ADDITIONAL COST TO OWNER.
LOCATE/REMOVE CAP EXISTING GOLF ROTOR
IRRIGATION HYDRAULIC/ PROGRAMMING PLAN LEGEND
SYMBOL ITEM
EXISTING PUMPING SYSTEM RENOVATION
PROGRAM IDENTIFICATION NUMBER
(HOLE - ZONE # - SMART HUB #)18-10-5
1" long line SHEET SIZE 24"x36"
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text I
AutoCAD SHX Text F
AutoCAD SHX Text I
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text A
AutoCAD SHX Text S
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text B
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text G
AutoCAD SHX Text C
1150 1130
11007
Toro Lynx Central Controls
#2
#3
14-9-3 14-10-3
14-11-3 14-12-3 14-13-3
14-14-3
14-15-3
14-16-3
14-17-3
7-1-2 7-2-2
7-3-2
7-4-2
7-5-2
7-6-2
7-7-2
7-8-2 7-14-2
7-15-2
7-16-2
7-17-2
7-18-2
7-19-2
7-20-2
7-21-2
7-22-2
7-23-2
7-24-2
7-25-2
7-26-2
7-27-2
7-28-2
7-29-2
7-30-2
13-1-3 13-2-3
13-3-3 13-4-3
13-5-3 13-6-3
13-7-3 13-8-3
13-9-3 13-10-3
13-11-3 13-12-3 13-13-3
13-14-3
13-15-3
13-16-3
13-17-3
13-18-3
13-19-3
13-20-3
13-21-3
13-22-3
13-23-3
13-24-3
13-25-3
13-26-3
13-27-3
13-28-3
13-29-3
13-30-3
13-31-3
13-32-3
13-33-3
8-1-3
8-2-3
8-3-3
8-4-3
8-5-3
8-6-3
8-7-3
8-8-3
8-9-3 8-10-3 8-11-3
8-12-3
8-13-3
8-14-3
8-15-3
8-16-3
8-17-3
8-18-3
8-19-3
8-20-3
8-21-3
8-22-3
8-23-3
8-24-3
8-25-3
8-26-3
8-27-3
8-28-3
8-29-3
8-30-3
8-31-3
8-32-3
8-33-3 8-34-3
8-35-3 8-36-3
8-37-3
8-38-3
8-39-3
9-1-2 9-2-2
9-3-2 9-4-2
9-5-2
9-6-2
9-7-2
9-8-2
9-9-2
9-10-2 9-11-2
9-12-2
9-13-2
9-14-2
9-15-2
9-16-2
9-17-2
9-18-2 9-19-2
9-20-2
9-21-2
9-22-2
9-23-2
9-24-2
9-25-2
9-26-2
9-27-2
9-28-2
9-29-2
10-1-2
10-2-2 10-3-2
10-4-2 10-5-2
10-6-2
10-7-2
10-8-2
10-9-2
10-10-2
10-11-2
10-12-2
10-13-2
10-14-2
11-1-2 11-2-2
11-3-2
11-4-2
11-5-2 11-6-2
11-7-2
11-8-2
11-9-2 11-10-2 11-11-2 11-12-2
11-13-2 11-14-2 11-15-2
11-16-2
11-17-2
11-18-2
11-19-2
11-20-2
11-21-2
11-22-2
11-23-2
11-24-2
11-25-2
11-26-2
11-27-2
11-28-2
11-29-2
12-1-2
12-2-2 12-3-2
12-4-2
12-5-2
12-6-2
12-7-2 12-8-2
12-9-2
12-10-2
12-11-2
12-12-2
12-13-2
12-14-2
12-15-2 12-16-2
12-17-2 12-18-2
12-19-2 12-20-2
12-21-2 12-22-2
12-23-2 12-24-2
12-25-2 12-26-2
Sheet of
M ad is on
, G A
Ph
0)
-0
G re en sb or o
R d
C on su lta nt Se rv ic es
Ir rig at io n
R ev is io ns D at e
D es cr ip tio n
N o.
Sc al e:
D ra w n by
D at e:
Fi le na m e:
C hk
'd B y:
W es t P in es G ol f C lu b
D ou gl as vi lle
, G eo rg ia
Ir rig at io n Pl an
IR-4
4 10
1"
/1
/2
IC
S
IC
S ia
Scale: 1"=100'
50' 100' 200' 300'
North
GENERAL NOTES:
1. ALL MAINLINES AND SUB-MAIN PIPE TO HAVE A MINIMUM OF 20" COVER.
2. NO ROCKS, BOULDERS, OR OTHER EXTRANEOUS MATERIALS TO BE USED IN BACKFILLING OF TRENCH.
3. ALL THREADED JOINTS TO BE COATED WITH TEFLON TAPE ONLY, IF NOT ACME THREADED.
4. ALL LINES TO BE THOROUGHLY FLUSHED BEFORE INSTALLATION OF SPRINKLERS.
5. 120 VOLT - 460 VOLT POWER WIRE TO BE INSTALLED AS PER LOCAL CODE.
6. SPRINKLERS AND RELATED EQUIPMENT TO BE INSTALLED AS PER DETAILS.
7. ALL ELECTRICAL JOINTS TO BE MADE USING WATERPROOF CONNECTIONS AS PER MANUFACTURER'S APPROVED METHOD.
8. ALL EQUIPMENT NOT SPECIFIED IN THE LEGEND SHALL BE DETERMINED AND FURNISHED BY THE CONTRACTOR.
9. CONTRACTOR TO PROVIDE CIRCUIT BREAKER BOX AT 120 VOLT SOURCE LOCATIONS FOR POWER TO AUTO-CONTROLLERS
UNLESS EXISTING BREAKERS ARE AVAILABLE.
10. NO ELECTRICAL CONNECTIONS SHALL BE MADE IN THE FIELD EXCEPT AT A VAKVE IN HEAD SPRINKLER OR ANOTHER VALVE
BOX SPECIFICALLY FOR CONNECTIONS.
11. ANY DISCREPANCY BETWEEN THIS SHEET AND OTHERS IN THIS SET MUST BE REFERRED TO THE IRRIGATION CONSULTANT
BY THE CONTRACTOR FOR CLARIFICATION BEFORE PROCEEDING WITH THE WORK.
12. ALL WIRING TO BE UL RATED FOR DIRECT BURIAL, SIZED AS PER PLANS.
13. 120 VOLT POWER WIRE CONNECTIONS SHALL BE ACCOMPLISHED USING PAIGE 3M SCOTCH CAST 8882 RE-ENTERABLE
RESIN CONNECTION ASSEMBLY. ALL OTHERS SHALL UTILIZE DBY OR DBR (TORO RESIN PACK ONLY).
14. INSTALLER IS RESPONSIBLE TO LOWER ALL SPRINKLERS TO APPROVED CONDITIONS BY IRRIGATION CONSULTANT BEFORE
FINAL ACCEPTANCE.
15. ALL SWING JOINTS SHALL BE ACME THREAD FROM THE SERVICE TEE AND THE INLET OF SPRINKLERS
16. INSTALLER SHALL REMOVE AND REPLACE SOD ON ALL TRENCHLINES. IF SOD IS NOT REPLACEABLE, INSTALLER WILL BE
RESPONSIBLE TO INSTALL NEW SOD.
17. ALL PRODUCT APPLICATIONS AND INSTALLATIONS MUST MEET MANUFACTURER'S REQUIREMENTS.
18. IRRIGATION PLANS SHALL HAVE PRECEDENCE OVER IRRIGATION SPECIFICATIONS. ANY DISCREPANCIES BETWEEN THESE
TWO DOCUMENTS MUST BE BROUGHT TO THE ATTENTION OF THE IRRIGATION CONSULTANT BEFORE INSTALLATION.
19. IT IS THE INTENT TO KEEP IRRIGATION WATER OFF OF ALL BUILDINGS, SIDEWALKS AND PARKING AREAS. IT WILL BE THE
RESPONSIBILITY OF THE IRRIGATION CONTRACTOR TO FIELD TUNE EACH SPRINKLE AS TO KEEPING IRRIGATION ADJUSTED
TO GRASSED AND SEEDED AREAS ONLY.
INSTALLER NOTES:
1. INSTALLER SHALL BE RESPONSIBLE TO LOCATE ALL EXISTING IRRIGATION
COMPONENTS, UTILITIES, AND DRAINAGE INCLUDING WIRE AND PIPE
LOCATING. ALSO LOCATING OF ALL EXISTING UTILITIES. THE INSTALLER
IS RESPONSIBLE TO REPAIR ALL EXISTING IRRIGATION SYSTEM
COMPONENTS AND UTILITIES.
2. INSTALLER SHALL CUT AND REPAIR ALL CART PATH CROSSINGS AS PER
OWNER'S APPROVED METHOD.
3. ALL LINES TO BE THOROUGHLY FLUSHED BEFORE INSTALLATION OF
SPRINKLERS.
4. INSTALLER SHALL COMPACT ALL TRENCHES IN 6 INCH LIFT WITH DIRT
COMPACTOR FOR NO SETTLEMENT.
5. CONTRACTOR SHALL REMOVE, DISPOSE, AND REPAIR CART PATHS.
6. CONTRACTOR SHALL REMOVE ALL SPOILS TO DESIGNATED AREA ON
SITE.
IRRIGATION HYDRAULIC/ PROGRAMMING PLAN LEGEND
SYMBOL ITEM
EXISTING PUMPING SYSTEM RENOVATION
PROGRAM IDENTIFICATION NUMBER
(HOLE - ZONE # - SMART HUB #)18-10-5
IRRIGATION SPRINKLER LEGEND/SPRINKLER COUNT
SYMBOL ITEM SPRINKLER COUNTS
FULL CIRCLE - 80' SPACING 327
-TORO INF55-578-66
PART CIRCLE - 80' SPACING 79
-TORO INF55-578-66
PART CIRCLE - 65'-70' SPACING 79
-TORO INF35-356-66
FULL CIRCLE - 90' SPACING 46
-TORO INF55-598-66
TOTAL: 531
-ALL SPRINKLERS TO UTILIZE A NEW 1 12 ” OR 1" ACME
UNITIZED SWING JOINT ASSEMBLY.
-SUBJECT TO FIELD NOZZLE CHANGE AS PER
FIELD STAKING BY IRRIGATION CONSULTANT,
AT NO ADDITIONAL COST TO OWNER.
LOCATE/REMOVE CAP EXISTING GOLF ROTOR
1" long line SHEET SIZE 24"x36"
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text
CC
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text I
AutoCAD SHX Text F
AutoCAD SHX Text I
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text A
AutoCAD SHX Text S
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text B
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text G
AutoCAD SHX Text C
CONTRACTOR TO COMPLY WITH ALL LOCAL CODES AND ORDINANCES IN REFERENCE
AND LOW VOLTAGE WIRING.
TRENCHINGD
NTS
TO THE INSTALLATION OF PVC PIPING
2"
20"
LOW-VOLTAGE
WIRING
TURF ROTOR
NTS
A
DENSITY AS UNDISTURBED
NOTE:
TO SAME
COMPACT SOIL AROUND ROTOR
EXISTING IRRIGATION SUBMAIN
INSTALLATION CONTRACTOR SHALL NOTE DEPTH OF PIPE AS 24" FOR MAINLINE AND
20" FOR SUBMAIN. DEPTH OF MAINLINE AT HARCO VALVES SHALL BE 30".
INSTALLATION CONTRACTOR SHALL BEGIN SLOPING PIPE TO DEEPER DEPTH 40 FT.
ON EACH SIDE OF VALVE(S).
Cut and Patch Installation Note:
Area of Sleeving should be saw-cut back to a solid surface. The repair area should be swept to remove residual dust to assure bonding of Hot Patch Repair Material.
Trench should be dug and pipe(s) put in place. Backfill the trench and compact in max. of 6" Lift. 8" Compacted Gravel Crusher Run should be installed and compacted. Hot Patch Asphalt repair material should be installed in a maximum of 2" lifts until finished grade is matched.
E
NTS
ASPHALT CUT AND PATCH
BACKFILL COMPACTED
TO 95% MODIFIED
PROCTOR IN 6" MAX.
LIFTS
HOT PATCH ASPHALT, INSTALLED IN MAX. OF 2" LIFTS TO
MATCH EXISTING GRADE WITH 1/2" CROWN FOR TRAFFIC
COMPACTION
EXISTING ASPHALT
MIN 12" EACH SIDE
SDR 11, RESIN #4710
ELECTRICAL CONDUIT
COMPACTED GRAVEL
CURSHER RUN
8"
12"
CONNECTOR.
STRAP TOP TO
STEP 5
1/2"
2STEP
4STEP
3STEP
STEP
PAST TABS.
INTO CONNECTOR
PUSH WIRE NUT
TWIST WIRE NUT ONTO WIRE ENDS.
AND TWIST ENDS TOGETHER.
STRIP WIRES APPROXIMATELY 1/2" FROM ENDS
NOTE: FOR WIRE SIZES #14, #12 AND #10.
C
TABS
NTS TORO SCOTCHLOCK RESIN PACKET
WIRE CONNECTION
TO NEXT SPRINKLER
FROM SMART HUB / GATEWAY
IMPACT ABSORPTION.
BETWEEN 30° TO 45° TO ALLOW ADEQUATE
ADJUST ANGLE OF SWING JOINT LAY ARM
UNITIZED SWING JOINT
1. AT ALL SPLICE LOCATIONS, PROVIDE SUFFICIENT SLACK
TO ALLOW THE SPLICE TO BE RAISED A MINIMUM OF 24"
FINISH GRADE
ABOVE GRADE FOR INSPECTION.
2. THE LOCATION OF THE WIRE CONNECTIONS SHALL BE SNUGLY PLACED
BENEATH THE FLANGE OF THE ROTOR.
*NOTE:
UTILIZE TORO 3M RESIN
PACKED CONNECTORS
ACME 1-1/2" UNITIZED SWING JOINT
THREADED INLET SIZE 1-1/2"
TWO-WIRE
Sheet of
M ad is on
, G A
Ph
0)
-0
G re en sb or o
R d
C on su lta nt Se rv ic es
Ir rig at io n
R ev is io ns D at e
D es cr ip tio n
N o.
Sc al e:
D ra w n by
D at e:
Fi le na m e:
C hk
'd B y:
W es t P in es G ol f C lu b
D ou gl as vi lle
, G eo rg ia
Ir rig at io n D et ai ls
IR-5
5 10
N
TS
/1
/2
IC
S
IC
S ia
2"
20"
STEEL ELECTRICAL
CONDUIT
GALVANIZED
EXISTING IRRIGATION SUBMAIN
TO NEXT SPRINKLER
FROM SMART HUB / GATEWAY
IMPACT ABSORPTION.
BETWEEN 30° TO 45° TO ALLOW ADEQUATE
ADJUST ANGLE OF SWING JOINT LAY ARM
UNITIZED SWING JOINT
1. AT ALL SPLICE LOCATIONS, PROVIDE SUFFICIENT SLACK
TO ALLOW THE SPLICE TO BE RAISED A MINIMUM OF 24"
FINISH GRADE
ABOVE GRADE FOR INSPECTION.
2. THE LOCATION OF THE WIRE CONNECTIONS SHALL BE SNUGLY PLACED
BENEATH THE FLANGE OF THE ROTOR.
*NOTE:
UTILIZE TORO 3M RESIN
PACKED CONNECTORS
THREADED INLET SIZE 1"
1" SPRINKLER INLET
1-1/2" SPRINKLER INLET
NOTE:
FOR LOCATION WHERE TWO SPRINKLERS TO BE SET
NEXT TO EACH OTHER (I.E. AT GREENSIDES), TUILIZE
LASCO 1-1/2" DOUBLE SWING TEE CONNECTED TO
EXISTING IRRIGATION SUBMAIN. ON ONE SIDE INSTALL
1-1/2" SWING JOINT, ON OTHER INSTALL 1" SWING JOINT,
REFER TO DETAIL-B.
EXISTING IRRIGATION SUBMAIN
TURF ROTOR GREEN INSTALLATION
NTS
B
ACME 1" UNITIZED SWING JOINT
ACME 1" UNITIZED SWING JOINT
ACME 1-1/2" UNITIZED SWING JOINT
LASCO DOUBLE SWING TEE,
ACME
TORO INFINITY 35 SERIES ROTORTORO INFINITY 55 SERIES ROTOR
SCH 80 PVC 1-1/2" X 1" REDUCER
SCH 80 PVC 1-1/2" X 1-1/2" ADAPTER,
MxF, ACME
SCH 80 PVC 1-1/2" X 1-1/2" ADAPTER,
MxM, ACME
1" long line SHEET SIZE 24"x36"
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text I
AutoCAD SHX Text F
AutoCAD SHX Text I
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text A
AutoCAD SHX Text S
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text B
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text G
AutoCAD SHX Text C
1080 1090
1150 1130
121314
Practice Range
Toro Lynx Central Controls
#2
#5 Toro Lynx Smart Controller
Existing Practice Range Control Wires
#4
#1
#3
Natural Gas Tracking Power Source
Natural Gas Line
Natural Gas Line
6-1-3 6-2-3
6-3-3
6-4-3
6-5-3
6-6-3
6-7-3
6-8-3
6-9-4 6-10-4
6-11-4
6-12-4 6-13-4 6-14-4
6-15-3
6-16-3
6-17-3
6-18-3
6-19-3
6-20-3
6-21-3
6-22-3
6-23-3
6-24-3
6-25-3
6-26-3
6-27-3
6-28-3
6-29-3
6-30-3
6-31-3
6-32-3
6-33-3 6-34-3
5-1-4 5-2-4
5-3-4
5-4-4
5-5-4 5-6-4
5-7-4
5-8-4
5-9-1 5-10-1
5-11-1 5-12-1
5-13-1
5-14-4
5-15-4
5-16-4
5-17-4
5-18-4
5-19-4
18-1-1
18-2-1
18-3-1
18-4-1
18-5-1
18-6-1
18-7-1
18-8-1
18-9-5 18-10-5
18-11-5
18-12-5
18-13-5
18-14-5
18-15-5
18-16-5
18-17-5
18-18-5
18-19-5
18-20-5
18-21-5
18-22-5
18-23-5
18-24-5 18-25-5
18-26-5
18-27-5
18-28-5
18-29-5
18-30-5 18-31-5
18-32-5
18-33-5
3-1-1
3-2-1 3-3-1
3-4-1 3-5-1
3-6-1 3-7-1
3-8-1
3-9-1
3-10-1
3-12-1
3-11-1
3-13-1 3-14-1
3-15-1 3-16-1
3-17-1 3-18-1
3-19-1
1-1-4
1-2-4 1-3-4
1-4-4
1-5-4
1-6-4
1-7-4
1-8-4
1-9-4
1-10-4
1-11-4
1-12-4
1-13-4
1-14-4
1-15-4 1-16-4
1-17-4 1-18-4
1-19-4 1-20-4
1-21-4 1-22-4
1-23-4 1-24-4
1-25-4 1-26-4
1-27-4 1-28-4
1-29-4 1-30-4
1-31-4 1-32-4
1-33-4 1-34-4
1-35-4 1-36-4
15-1-4
15-2-4
15-3-4
15-4-4
15-5-4
15-6-4
15-7-4
15-8-4
15-9-4 15-10-4 15-11-4
15-12-4
15-13-4
15-14-4
15-15-4
15-16-4
15-17-4
16-1-4
16-2-4
16-3-4
16-4-4
16-5-4
16-6-4
16-7-4
16-8-4
16-9-4
16-10-4
16-11-4
16-12-4
16-13-4
16-14-4
16-15-4
16-16-4
16-17-4
16-18-4
16-19-4
16-20-4 16-21-4
16-22-4
16-23-4
16-24-4 16-25-4
16-26-4
16-27-4
16-28-4 16-29-4
16-30-4
16-31-4
16-32-4
16-33-4
17-1-5
17-2-5
17-3-5
17-4-5
17-5-5
17-6-5
17-7-5
17-8-5
17-9-5
17-10-5
17-11-5
17-12-5
17-13-5
17-14-5
17-15-5
17-16-5
17-17-5
17-18-5 17-19-5
17-20-5
17-21-5
17-22-5
17-23-5
17-24-5
17-25-5
17-26-5
17-27-5
17-28-5
17-29-5
17-30-5
17-31-5
17-32-5
17-33-5
17-34-5 17-35-5
17-36-5 17-37-5
4-1-1
4-2-1 4-3-1
4-4-1 4-5-1
4-6-1
4-7-1
4-8-1
4-9-1
4-10-1
4-11-1
4-12-1
4-13-1
4-14-1
4-15-1
4-16-1 4-17-1
4-18-1 4-19-1
4-20-1 4-21-1
4-22-1 4-23-1
4-24-1 4-25-1
4-26-1
4-27-1
4-28-1 4-29-1
4-30-1
4-31-1
4-32-1 4-33-1
4-34-1 4-35-1
4-36-1 4-37-1
4-38-1
2-1-1
2-2-1
2-3-1 2-4-1
2-5-1
2-6-1
2-7-1
2-8-1
2-9-1
2-10-1
2-11-1
2-12-1
2-13-1
2-14-1
2-15-1
2-16-1
2-17-1 2-18-1
2-19-1 2-20-1
2-21-1 2-22-1
2-23-1 2-24-1
2-25-1 2-26-1
2-27-1 2-28-1
2-29-1 2-30-1
14-1-3
14-2-3
14-3-3
14-4-3
14-5-3
14-6-3
14-7-3
14-8-3
14-9-3 14-10-3
14-11-3 14-12-3 14-13-3
14-14-3
14-15-3
14-16-3
14-17-3
14-18-3
14-19-3
14-20-3
14-21-3
14-22-3
14-23-3
14-24-3
14-25-3
14-26-3
14-27-3
14-28-3
14-29-3
14-30-3
14-31-3
14-32-3
14-33-3
14-34-3
14-35-3
7-1-2 7-2-2
7-3-2
7-4-2
7-5-2
7-6-2
7-7-2
7-8-2
7-9-2
7-10-2 7-11-2
7-12-2
7-13-2
7-14-2
7-15-2
7-16-2
7-17-2
7-18-2
7-19-2
7-20-2
7-21-2
7-22-2
7-23-2
7-24-2
7-25-2
7-26-2
7-27-2
7-28-2
7-29-2
7-30-2
13-1-3 13-2-3
13-3-3 13-4-3
13-5-3 13-6-3
13-7-3 13-8-3
13-9-3 13-10-3
13-11-3 13-12-3 13-13-3
13-14-3
13-15-3
13-16-3
13-17-3
13-18-3
13-19-3
13-20-3
13-21-3
13-22-3
13-23-3
13-24-3
13-25-3
13-26-3
13-27-3
13-28-3
13-29-3
13-30-3
13-31-3
13-32-3
13-33-3
8-1-3
8-2-3
8-3-3
8-4-3
8-5-3
8-6-3
8-7-3
8-8-3
8-9-3 8-10-3 8-11-3
8-12-3
8-13-3
8-14-3
8-15-3
8-16-3
8-17-3
8-18-3
8-19-3
8-20-3
8-21-3
8-22-3
8-23-3
8-24-3
8-25-3
8-26-3
8-27-3
8-28-3
8-29-3
8-30-3
8-31-3
8-32-3
8-33-3 8-34-3
8-35-3 8-36-3
8-37-3
8-38-3
8-39-3
9-1-2 9-2-2
9-3-2 9-4-2
9-5-2
9-6-2
9-7-2
9-8-2
9-9-2
9-10-2 9-11-2
9-12-2
9-13-2
9-14-2
9-15-2
9-16-2
9-17-2
9-18-2 9-19-2
9-20-2
9-21-2
9-22-2
9-23-2
9-24-2
9-25-2
9-26-2
9-27-2
9-28-2
9-29-2
10-1-2
10-2-2 10-3-2
10-4-2 10-5-2
10-6-2
10-7-2
10-8-2
10-9-2
10-10-2
10-11-2
10-12-2
10-13-2
10-14-2
11-1-2 11-2-2
11-3-2
11-4-2
11-5-2 11-6-2
11-7-2
11-8-2
11-9-2 11-10-2 11-11-2 11-12-2
11-13-2 11-14-2 11-15-2
11-16-2
11-17-2
11-18-2
11-19-2
11-20-2
11-21-2
11-22-2
11-23-2
11-24-2
11-25-2
11-26-2
11-27-2
11-28-2
11-29-2
12-1-2
12-2-2 12-3-2
12-4-2
12-5-2
12-6-2
12-7-2 12-8-2
12-9-2
12-10-2
12-11-2
12-12-2
12-13-2
12-14-2
12-15-2 12-16-2
12-17-2 12-18-2
12-19-2 12-20-2
12-21-2 12-22-2
12-23-2 12-24-2
12-25-2 12-26-2
Sheet of
M ad is on
, G A
Ph
0)
-0
G re en sb or o
R d
C on su lta nt Se rv ic es
Ir rig at io n
R ev is io ns D at e
D es cr ip tio n
N o.
Sc al e:
D ra w n by
D at e:
Fi le na m e:
C hk
'd B y:
W es t P in es G ol f C lu b
D ou gl as vi lle
, G eo rg ia
O ve ra ll
Ir rig at io n W iri ng
P la n
IR-6
6 10
1"
/1
/2
IC
S
IC
S ia
Scale: 1"=100'
50' 100' 200' 300'
North
Controller #1
Controller #5
Controller #2
Controller #3
Controller #4
TORO LYNX SMART HUB 2-WIRE CONTROLS, RADIO COMMUNICATION, REQUIRES 120 VAC POWER
TORO DEC-SG-LINE LIGHTNING GROUND ASSEMBLY
TORO POLARIS 6 WIRE CONNECTORS; PRIMARY TO SECONDARY WIRE PATHS, 6 DIRECTION CONNECTOR
TORO POLARIS 4 WIRE CONNECTORS; PRIMARY TO SECONDARY WIRE PATHS, 4 DIRECTION CONNECTOR
PRIMARY WIRE PATH, TWO-WIRE, #14-2
SECONDARY WIRE PATH , TWO-WIRE, #14-2
DESCRIPTIONSYMBOLS
TORO LYNX ELECTRICAL LEGEND
TORO LYNX PE CENTRAL CONTROLS. WITH PREMIUM COMPUTER PACKAGE AND 5 YEAR NSN SERVICE.
#1-#5
TORO LYNX SMART CONTROLLER, REQUIRES 120 VAC POWER#6
PROGRAM IDENTIFICATION NUMBER: (HOLE - ZONE # - SMART HUB #)18-10-5
NOTES:
1. ALL PRIMARY AND SECONDARY WIRE TO BE #14-2 MAXI CABLE FOR DIRECT BURIAL
2. TORO POLARIS CONNECTORS SHALL BE UTILIZED ON 2, 3, 4 AND 6 WIRE CONNECTIONS ON PRIMARY OR
SECONDARY WIRE PATHS (ONLY).
3. ALL COM CABLE TAPS AND CONNECTIONS SHALL CONFORM TO/WITH LOCAL AND STATE CODES.
4. 24" LOOP OF WIRE LOCATED BELOW EACH HEAD.
5. ALL COM CABLE SHALL HAVE ENOUGH SLACK AS TO ACCOMODATE FOR EXPANSION AND/OR CONTRACTION.
6. ALL WIRE TO BE UL APPROVED FOR DIRECT BURIAL.
7. ALL LXM MODULES SHALL HAVE AN INDIVIDUAL ADDRESS STATION OUTPUT
8. INSTALL EACH GROUND PLATE 4'-0" - 8'0" FROM LINE. DO NOT INSTALL IN THE SAME TRENCH AS WIRE PATH.
9. INSTALL DEC-SG-LINE SURGE PROTECTION NOT MORE THAN 1,000' APART.
10.INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH MANUFACTURER'S SPECIFICATIONS.
IRRIGATION PLANS DIAGRAMMATIC NOTE
ALL WIRING AND EQUIPMENT LOCATIONS ARE DIAGRAMMATIC IN
NATURE. ALL EQUIPMENT SHALL BE LOCATED WITHIN OWNER'S
PROPERTY AND IN LANDSCAPED AREAS. IT IS THE INTENT TO HIDE
ALL ELECTRIC REMOTE VALVE BOXES FROM VIEW. OWNER SHALL
ULTIMATELY APPROVE ALL SPRINKLER, VALVE AND CONTROLLER
LOCATIONS BEFORE INSTALLATION.
LIGHTNING IRRIGATION PROTECTION-EARTH GROUNDS
GROUND RODS ARE TO HAVE A MINIMUM DIAMETER OF 5/8” AND A MINIMUM LENGTH OF 10 FEET. THESE ARE TO BE DRIVEN INTO THE GROUND IN A VERTICAL POSITION OR AN OBLIQUE ANGLE NOT TO EXCEED 45 DEGREES AT A LOCATION 10 FEET FROMTHE ELECTRONIC EQUIPMENT. THE GROUND PLATE, OR THE WIRES AND CABLES CONNECTED TO SAID EQUIPMENT, AS SHOWN IN THE DETAIL ABOVE. THE ROD IS TO BE STAMPED WITH THE UL LOGO (PAIGE ELECTRIC PART NUMBER 1820037). A 6” AWG SOLID BARE COPPER WIRE (ABOUT 12 FEET LONG) SHALL BE CONNECTED TO THE ELECTRONIC EQUIPMENT GROUND LUG AS SHOWN IN THE DETAIL ABOVE.
THE COPPER GROUNDING PLATE ASSEMBLIES (PAIGE ELECTRIC PART NUMBER 182199L) MUST MEET THE MINIMUM REQUIREMENTS OF ARTICAL 250-52(0) OF THE 1999 NEC. THEY ARE TO BE MADE OF A COPPER ALLOY INTENDED FOR GROUNDING APPLICATIONS AND WILL HAVE MINIMUM DIMENSIONS OF 4” X 96” X 0.0625 “. A 25 FOOT CONTINUOUS LENGTH (NO SPICES ALLOWED UNLESS USING EXOTHERMIC WELDING PROCESS) OF 6 AWG SOLID BARE COPPER WIRE IS TO BE ATTACHED TO THE PLATE BY THE MANUFACTURER USING AN APPROVED WELDING PROCESS. THIS WIRE IS TO BE CONNECTED TO THE ELECTRONIC EQUIPMENT GROUND LUG AS SHOWN IN THE DETAIL. THE GROUND PLATE IS TO BE INSTALLED OT A MINIMUM DEPTH OF 30”, AT A LOCATION 8 FEET FROM THE ELECTRONIC EQUIPMENT AND UNDERGROUND WIRES AND CABLES. TWO 50 - POUND BAGS OF POWERSET [PAIGE ELECTRIC PART NUMBER 1820058] EARTH CONTACT MATERIAL MUST BE SPREAD SO THAT IT SURROUNDS THE COPPER PLATE EVENLY ALONG ITS LENGTH WITHIN A 6” WIDE TRENCH.
SALTS, FERTILIZERS, BENTONITE, CLAY, CEMENT, COKE, CARBON, AND OTHER CHEMICALS ARE NOT TO BE USED TO IMPOVE SOIL CONDUCTIVITY BECAUSE THESE MATERIALS ARE CORROSIVE AND WILL CAUSE THE COPPER
ELECTRODES TO ERODE AND BECOME LESS EFFECTIVE WITH TIME.
INSTALL ALL GROUNDING CIRCUIT COMMONEST IN STRAIGHT LINES WHEN NECESSARY TO MAKE BENDS. DO NOT MAKE SHARP TURNS. TO PREVENT THE ELECTRODE-DISCHARGED ENERGY FROM REENTERING THE UNDERGOUND WIRES AND CABLES, ALL ELECTRODES SHALL BE AS SHOWN IN THE DETAIL OF PAGE 1, SO THAT
THEY DON'T COMPETE FOR THE SAME SOIL.
THE EARTH-TO-GROUND RESISTANCE OF THIS CIRCUIT TO BE MEASURED USING A MEGGER OR OTHER SIMILAR INSTRUMENTS, AND THE READING IS TO BE NO MORE THAN 10 OHMS. IF THE RESISTANCE IS MORE THAN 10 OHMS ADDITIONAL GROUND PLATES AND THE SOIL SURROUNDING COPPER ELECTRODES BE KEPT AT A MINIMUM MOISTURE LEVEL OF 15% AT ALL TIMES BY DEDICATING AN IRRIGATION GROUNDING ASSEMBLY. THE IRRIGATED AREA SHOULD INCLUDE A CIRCLE WITH A 10-FOOT RADIUS AROUND THE GROUND ROD AND A
RECTANGLE MEASURING 1-FOOT X 24-FEET AROUND THE PLATE.
ALL UNDERGROUND CIRCUIT CONNECTIONS ARE TO BE MADE USING AN EXOTHERMIC WELDING PROCESS BY UTILIZING PRODUCTS SUCH AS CADWELD “ONE-SHOT” KITS, SOLDER SHALL NOT BE ALLOWED TO MAKE CONNECTIONS, IN ORDER TO ENSURE PROPER IGNITION OF THE “ONE SHOT”, THE CADWELD T-320 IGNITER MUST BE UTILIZED [PAIGE ELECTRIC PART NUMBER 182004]. THE 6 AWG BARE COPER WIRES ARE TO BE INSTALLED IN AS STRAIGHT A LINE AS POSSIBLE, AND IF IT IS NECESSARY TO MAKE A TURN OR A BEND IT SHALL BE DONE IN A SWEEPING CURVE WITH A MINIMUM RADIUS OF 8” AND A MINIMUM ANGLE OF 90O.
MECHANICAL CLAMPS SHALL BE PERMITTED TEMPORARILY DURING THE RESISTANCE TEST PROCESS, BUT ARE TO
BE REPLACED WITH CADWELD “ONE-SHOT” KITS IMMEDIATLY THEREAFTER.
WIRES AND CABLES
POWER WIRING (120 VAC OR 200 VAC)
ALL POWER CABLES ARE TYPE TRAY CABLE. THEY ARE TO BE UL LISTED FOR DIRECT BURIAL, AND RATED AT 600 VOLTS. THE CABLE SHALL INCLUDE THREE CONDUCTORS, WHICH ARE TO BE COLORED PER WIRE INDUSTRY STANDARD OR NUMBERED AS 1, 2, AND 3. THE SIZE OF THE “HOT” AND “COMMON” CONDUCTORS ARE TO BE AS SHOWN ON THE IRRIGATION PLANS, AND THE SIZE OF THE “GROUND” CONDUCTOR AS REQUIRED BY THE NATIONAL ELECTRICAL CODE, OR LARGER. THE INNER COPPER CONDUCTORS SHALL ARE TO BE COVERED WITH HIGH DIELECTRIC PVC AND NYLON. THE OUTER JACKET WILL BE BLACK PVC AND IS TO BE SUNLIGHT RESISTANT.
'PAIGE ELECTRIC CO., LP SPECIFICATION NUMBER P7266D FOR 10 AWG AND SMALLER AND SPECIFICATION
NUMBER P7267D FOR 8 AWG AND LARGER.]
CONTROL VALVE WIRING (24 VOLT AC, NOMINAL);
WIRES CONNECTING THE REMOTE CONTROL VALVES TO THE IRRIGATION CONTROLLER ARE SINGLE CONDUCTORS, TYHPE PE. ITS CONSTRUCTION INCORPORATES A SOLID COPPER CONDUCTOR AND POLYETHYLENE (PE) INSULATION WITH A MINIMUM THICKNESS OF 0.045 INCHES. THE WIRES SHALL BE UL LISTED FOR DIRECT BURIAL IN IRRIGATION SYSTEMS AND BE RATED AT A MINIMUM OF 30 VAC. WIRE SIZEDS AND COLORS ARE DEFINED IN THE IRRIGATION PLANS AND OTHER SPECIFICATIONS. [PAIGE ELECTRIC CO., LP SPECIFICATION
NUMBER P70790.]
DISCLAIMER: IRRIGATION CONSULTANT SERVICES, INC HAS MADE EVERY EFFORT TO ENSURE THAT THE INFORMATION AND RECOMMENDATIONS CONTAINED WITHIN ARE CORRECT. HOWEVER NEITHER IRRIGATION CONSULTANT SERVICES, NOR ANY OF ITS EMPLOYEES WARRANTS NOR ACCEPTS ANY LIABILITY FOR THE USE OF THIS INFORMATION . NATIONAL AND LOCAL ELECTRICAL CODES SHOULD ALWAYS BE FOLLOWED. WIREING, GROUNDING, SHEILDING, AND BONDING IRRIGATION SYSTEMS COMPONENTS OFTEN REQUIRE COMPETENT ENGINEER JUDGEMNT ON A CASE-BY-CASE BASES. COMPETENT ENGINEERING ASSISTANCE SHOULD BE SOUGHT
FROM FIRMS SPECIALIZING IN THIS FIELD.
1" long line SHEET SIZE 24"x36"
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text
CC
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text T
AutoCAD SHX Text I
AutoCAD SHX Text F
AutoCAD SHX Text I
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text I
AutoCAD SHX Text T
AutoCAD SHX Text A
AutoCAD SHX Text G
AutoCAD SHX Text I
AutoCAD SHX Text R
AutoCAD SHX Text R
AutoCAD SHX Text I
AutoCAD SHX Text N
AutoCAD SHX Text I
AutoCAD SHX Text G
AutoCAD SHX Text N
AutoCAD SHX Text E
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text D
AutoCAD SHX Text A
AutoCAD SHX Text S
AutoCAD SHX Text C
AutoCAD SHX Text O
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text T
AutoCAD SHX Text R
AutoCAD SHX Text E
AutoCAD SHX Text B
AutoCAD SHX Text O
AutoCAD SHX Text R
AutoCAD SHX Text O
AutoCAD SHX Text U
AutoCAD SHX Text R
AutoCAD SHX Text S
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text G
AutoCAD SHX Text C
AutoCAD SHX Text 074483
AutoCAD SHX Text C
AutoCAD SHX Text
CC
C
Practice Range
#5 Toro Lynx Smart Controller
Existing Practice Range Control Wires
#4
#1
Natural Gas Tracking Power Source
Natural Gas Line
3/4" Galvanized Steel Conduit for Toro Two-Wire Control Wire for Gas Line Power Protection
3/4" Galvanized Steel Conduit for Toro Two-Wire Control Wire for Gas Line Power Protection
3/4" Galvanized Steel Conduit for Toro Two-Wire Control Wire for Gas Line Power Protection
3/4" Galvanized Steel Conduit for Toro Two-Wire Control Wire for Gas Line Power Protection
6-13-4 6-14-4 6-16-3
6-18-3
5-1-4 5-2-4
5-3-4
5-4-4
5-5-4 5-6-4
5-7-4
5-8-4
5-9-1 5-10-1
5-11-1 5-12-1
5-13-1
5-14-4
5-15-4
5-16-4
5-17-4
5-18-4
5-19-4
18-1-1
18-2-1
18-3-1
18-4-1
18-5-1
18-6-1
18-7-1
18-8-1
18-9-5 18-10-5
18-11-5
18-12-5
18-13-5
18-14-5
18-15-5
18-16-5
18-17-5
18-18-5
18-19-5
18-20-5
18-21-5
18-22-5
18-23-5
18-24-5 18-25-5
18-26-5
18-27-5
18-28-5
18-29-5
18-30-5 18-31-5
18-32-5
18-33-5
3-1-1
3-2-1 3-3-1
3-4-1 3-5-1
3-6-1 3-7-1
3-8-1
3-9-1
3-10-1
3-12-1
3-11-1
3-13-1 3-14-1
3-15-1 3-16-1
3-17-1 3-18-1
3-19-1
1-1-4
1-2-4 1-3-4
1-4-4
1-5-4
1-6-4
1-7-4
1-8-4
1-9-4
1-10-4
1-11-4
1-12-4
1-13-4
1-14-4
1-15-4 1-16-4
1-17-4 1-18-4
1-19-4 1-20-4
1-21-4 1-22-4
1-23-4 1-24-4
1-25-4 1-26-4
1-27-4 1-28-4
1-29-4 1-30-4
1-31-4 1-32-4
1-33-4 1-34-4
1-35-4 1-36-4
16-1-4
16-2-4
16-3-4
16-4-4
16-5-4
16-6-4
16-7-4
16-8-4
16-15-4
16-16-4
16-17-4
16-18-4
16-19-4
16-20-4 16-21-4
16-22-4
16-23-4
16-24-4 16-25-4
16-26-4
16-27-4
16-28-4 16-29-4
16-30-4
16-31-4
16-32-4
16-33-4
17-1-5
17-2-5
17-3-5
17-4-5
17-5-5
17-6-5
17-7-5
17-8-5
17-9-5
17-10-5
17-11-5
17-12-5
17-13-5
17-14-5
17-15-5
17-16-5
17-17-5
17-18-5 17-19-5
17-20-5
17-21-5
17-22-5
17-23-5
17-24-5
17-25-5
17-26-5
17-27-5
17-28-5
17-29-5
17-30-5
17-31-5
17-32-5
17-33-5
17-34-5 17-35-5
17-36-5 17-37-5
4-1-1
4-2-1 4-3-1
4-4-1 4-5-1
4-6-1
4-7-1
4-8-1
4-9-1
4-10-1
4-11-1
4-12-1
4-13-1
4-14-1
4-15-1
4-16-1 4-17-1
4-18-1 4-19-1
4-20-1 4-21-1
4-22-1 4-23-1
4-24-1 4-25-1
4-26-1
4-27-1
4-28-1 4-29-1
4-30-1
4-31-1
4-32-1 4-33-1
4-34-1 4-35-1
4-36-1 4-37-1
4-38-1
2-1-1
2-2-1
2-3-1 2-4-1
2-5-1
2-6-1
2-7-1
2-8-1
2-9-1
2-10-1
2-11-1
2-12-1
2-13-1
2-14-1
2-15-1
2-16-1
2-17-1 2-18-1
2-19-1 2-20-1
2-21-1 2-22-1
2-23-1 2-24-1
2-25-1 2-26-1
2-27-1 2-28-1
2-29-1 2-30-1
Sheet of
M ad is on
, G A
Ph
0)
-0
G re en sb or o
R d
C on su lta nt Se rv ic es
Ir rig at io n
R ev is io ns D at e
D es cr ip tio n
N o.
Sc al e:
D ra w n by
D at e:
Fi le na m e:
C hk
'd B y:
W es t P in es G ol f C lu b
D ou gl as vi lle
, G eo rg ia
Ir rig at io n W iri ng
P la n
IR-7
7 10
1"
/1
/2
IC
S
IC
S ia
Scale: 1"=100'
50' 100' 200' 300'
North
IRRIGATION PLANS DIAGRAMMATIC NOTE
ALL WIRING AND EQUIPMENT LOCATIONS ARE DIAGRAMMATIC IN
NATURE. ALL EQUIPMENT SHALL BE LOCATED WITHIN OWNER'S
PROPERTY AND IN LANDSCAPED AREAS. IT IS THE INTENT TO HIDE
ALL ELECTRIC REMOTE VALVE BOXES FROM VIEW. OWNER SHALL
ULTIMATELY APPROVE ALL SPRINKLER, VALVE AND CONTROLLER
LOCATIONS BEFORE INSTALLATION.
TORO LYNX SMART HUB 2-WIRE CONTROLS, RADIO COMMUNICATION, REQUIRES 120 VAC POWER
TORO DEC-SG-LINE LIGHTNING GROUND ASSEMBLY
TORO POLARIS 6 WIRE CONNECTORS; PRIMARY TO SECONDARY WIRE PATHS, 6 DIRECTION CONNECTOR
TORO POLARIS 4 WIRE CONNECTORS; PRIMARY TO SECONDARY WIRE PATHS, 4 DIRECTION CONNECTOR
PRIMARY WIRE PATH, TWO-WIRE, #14-2
SECONDARY WIRE PATH , TWO-WIRE, #14-2
DESCRIPTIONSYMBOLS
TORO LYNX ELECTRICAL LEGEND
TORO LYNX PE CENTRAL CONTROLS. WITH PREMIUM COMPUTER PACKAGE AND 5 YEAR NSN SERVICE.
#1-#5
NOTES:
1. ALL PRIMARY AND SECONDARY WIRE TO BE #14-2 MAXI CABLE FOR DIRECT BURIAL
2. TORO POLARIS CONNECTORS SHALL BE UTILIZED ON 2, 3, 4 AND 6 WIRE CONNECTIONS ON PRIMARY OR
SECONDARY WIRE PATHS (ONLY).
3. ALL COM CABLE TAPS AND CONNECTIONS SHALL CONFORM TO/WITH LOCAL AND STATE CODES.
4. 24" LOOP OF WIRE LOCATED BELOW EACH HEAD.
5. ALL COM CABLE SHALL HAVE ENOUGH SLACK AS TO ACCOMODATE FOR EXPANSION AND/OR CONTRACTION.
6. ALL WIRE TO BE UL APPROVED FOR DIRECT BURIAL.
7. ALL LXM MODULES SHALL HAVE AN INDIVIDUAL ADDRESS STATION OUTPUT
8. INSTALL EACH GROUND PLATE 4'-0" - 8'0" FROM LINE. DO NOT INSTALL IN THE SAME TRENCH AS WIRE PATH.
9. INSTALL DEC-SG-LINE SURGE PROTECTION NOT MORE THAN 1,000' APART.
10.INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH MANUFACTURER'S SPECIFICATIONS.
LIGHTNING IRRIGATION PROTECTION-EARTH GROUNDS
GROUND RODS ARE TO HAVE A MINIMUM DIAMETER OF 5/8” AND A MINIMUM LENGTH OF 10 FEET. THESE ARE TO BE DRIVEN INTO THE GROUND IN A VERTICAL POSITION OR AN OBLIQUE ANGLE NOT TO EXCEED 45 DEGREES AT A LOCATION 10 FEET FROMTHE ELECTRONIC EQUIPMENT. THE GROUND PLATE, OR THE WIRES AND CABLES CONNECTED TO SAID EQUIPMENT, AS SHOWN IN THE DETAIL ABOVE. THE ROD IS TO BE STAMPED WITH THE UL LOGO (PAIGE ELECTRIC PART NUMBER 1820037). A 6” AWG SOLID BARE COPPER WIRE (ABOUT 12 FEET LONG) SHALL BE CONNECTED TO THE ELECTRONIC EQUIPMENT GROUND LUG AS SHOWN IN THE DETAIL ABOVE.
THE COPPER GROUNDING PLATE ASSEMBLIES (PAIGE ELECTRIC PART NUMBER 182199L) MUST MEET THE MINIMUM REQUIREMENTS OF ARTICAL 250-52(0) OF THE 1999 NEC. THEY ARE TO BE MADE OF A COPPER ALLOY INTENDED FOR GROUNDING APPLICATIONS AND WILL HAVE MINIMUM DIMENSIONS OF 4” X 96” X 0.0625 “. A 25 FOOT CONTINUOUS LENGTH (NO SPICES ALLOWED UNLESS USING EXOTHERMIC WELDING PROCESS) OF 6 AWG SOLID BARE COPPER WIRE IS TO BE ATTACHED TO THE PLATE BY THE MANUFACTURER USING AN APPROVED WELDING PROCESS. THIS WIRE IS TO BE CONNECTED TO THE ELECTRONIC EQUIPMENT GROUND LUG AS SHOWN IN THE DETAIL. THE GROUND PLATE IS TO BE INSTALLED OT A MINIMUM DEPTH OF 30”, AT A LOCATION 8 FEET FROM THE ELECTRONIC EQUIPMENT AND UNDERGROUND WIRES AND CABLES. TWO 50 - POUND BAGS OF POWERSET [PAIGE ELECTRIC PART NUMBER 1820058] EARTH CONTACT MATERIAL MUST BE SPREAD SO THAT IT SURROUNDS THE COPPER PLATE EVENLY ALONG ITS LENGTH WITHIN A 6” WIDE TRENCH.
SALTS, FERTILIZERS, BENTONITE, CLAY, CEMENT, COKE, CARBON, AND OTHER CHEMICALS ARE NOT TO BE USED TO IMPOVE SOIL…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .