Work Boat - Salient Characteristics - DRAFT dtd 26Sep24.pdf
PDF 118 KB Posted
- Solicitation number
- FA480924Q0118
About this file
This document outlines the Salient Characteristics for a Work Boat and Boat Trailer required by Seymour Johnson Air Force Base (SJAFB) for hazardous material (HAZMAT) spill response operations on the Neuse River. The key requirements include:
- Work Boat: Minimum 20-foot length, aluminum construction, self-bailing deck, center console with windscreen, minimum 3,000-pound cargo capacity, 65-gallon fuel tank, and various lighting, electrical, and accessory specifications.
- Boat Trailer: Landing craft trailer with disc brakes, two axles, and heavy-duty guide boards.
- Training: Minimum 8 hours of on-site instruction for 6-8 personnel.
- Warranty: Minimum 1-year warranty on material and workmanship.
This document is in support of a pre-solicitation Request for Information (RFI) for the work boat, boom reel, and associated trailers. The RFI is being issued by the Department of the Air Force Air Combat Command and seeks information from interested parties on their ability to provide some or all of these requirements, impact of combining the efforts, and any training that could be provided.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS - WORK BOAT AND BOAT TRAILER
A. DESCRIPTION: This requirement is for a work boat for use by a spill response team operating across the Neuse River adjacent to Seymour Johnson Air Force Base, North Carolina; a boat trailer sufficient to transport the work boat to and from the boat ramp; and the provision of equipment training.
B. WORK BOAT REQUIREMENTS:
1. Hull:
a. Minimum length of 20 feet and a maximum of 23 feet. The length requirement does not include push knees, outboard, or motor guard.
b. Minimum width of eight (8) feet and maximum of 8.5 feet.
2. Self-bailing deck and center console with windscreen. Windscreen shall be acrylic with grab handle on console.
3. Cargo/bow door minimum 60 inches wide and has a minimum 1,500-pound payload.
4. Minimum cargo capacity of 3,000 pounds.
5. General Construction:
a. Boat Bottom -- At minimum, aluminum construction 5086 alloy 0.25-inch thick or equivalent.
b. Sides -- At minimum, aluminum construction 5052 alloy 0.19-inch thick or equivalent.
c. Zinc Anode protection throughout
d. Beaching Wear Plate -- Six (6) inches wide, one (1) inch from the keel on both sides starting at frame and continuing aft two (2) to three (3) feet. Beaching plate shall be minimum 0.25-inch thick hull material.
e. Gunwale Railings – At minimum, aluminum round railing along gunnel; Schedule 40 (Sch40) aluminum one-inch 6063 or equivalent.
6. Fuel Tank – At minimum, 65-gallon, below deck, built-in, and aluminum.
7. Deck Lashing Railing (cargo tie downs) -- At minimum, aluminum Sch40 aluminum one-inch 6063; round railing secured along outer deck for lashing cargo.
8. Non-Skid Painted Deck -- Resistant to UV, Oil, abrasion, and flammability.
9. Seating – At minimum, four (4) fold-down side seats and two (2) storage seats that are cushioned and at least 34 inches wide, 12 inches deep, and 15 inches in height.
10. Dual bow eye and transom tie downs.
11. Welded deck cleats.
12. Locker stowage.
13. Navigation compass.
14. Aluminum accessories arch over console allowing for overhead placement of floodlights, hailing horn and other accessories. The arch shall fold down for transport over road or in container.
15. Tow Bollard - Crusiform style specific pull requirement and capabilities of the vessel
16. Cup/drink holders (customer preference is for a quantity of six).
17. Transponder mounting bracket.
18. Bimini top that is at minimum 93 inches wide, 48 inches in height, and 96 inches long. The bimini top shall be gray in color, or other light color (NOT white).
19. Paddle/ pole holder bracket (2) 1 1/2" slots with retaining cords to accommodate commercially available paddles or boat hooks
20. Electrical (Minimum Requirements):
a. Master battery switch
b. 12-volt DC electrical battery system
c. Plug, USB 12-Volt
d. Plug, 12-Volt DC Accessory
e. 1,500 gallons per hour (GPH) automatic bilge pump
f. Electric bow door winch
21. Lighting:
a. LED Flood Deck Lights -- Completely weatherproof and sealed against moisture. The mounting hardware shall be stainless steel to prevent rust and corrosion. The housing shall be shock resistant and capable to withstand up to six (6) G-force of vibration.
b. Deck Courtesy Lighting (indirect lighting for floor) -- 12-volt LED courtesy or step light for low-level general illumination.
c. Docking Lights -- Forward mounted lighting for illumination when approaching docks or work area (not for continuous usage).
d. Remote Spotlight -- Wireless remote-controlled operation; 370-degree rotation and 135-degree tilt; 500,000 candle power; UV- and saltwater-resistant.
e. Dome Light - Red and white lighting.
22. Motor (minimum requirements):
a. Minimum 150 horse power (HP). NOTE: Vendor to include brand/model information in submitted quote/proposal package..
b. Three-blade stainless steel propeller, 15 x 21 Pitch.
c. Watertight connectors on harness.
d. Hydraulic Jackplate with six (6) inch setback.
e. Outboard motor/stern guard with rope guard -- Aluminum motor guard with motor/transom accessibility.
C. TRAILER REQUIREMENTS:
1. Landing Craft Trailer to include with disc brakes, two (2) axles, and welded guide boards.
2. Brake disc – 12-inch; 16,000 pounds; two (2) axle
3. Six (6) foot heavy duty guide boards for standard guide pole.
4. Spare Tire Mount using a replacement spindle
5. One (1) spare tire.
D. TRAINING:
On-site training accommodating six (6) to eight (8) personnel. At minimum the training session shall include two (2) hours of land instruction and six (6) hours of river instruction.
E. WARRANTY:
Must have a minimum 1 year warranty, to include material and workmanship
File details come from the government source that posted it. Updated .