Wood Pellet Specifications.pdf

This technical data sheet provides detailed specifications for multiple boiler types, ranging from PE(S) 12 to PE(S) 56, with comprehensive information on flue gas volumes, rated power, fuel requirements, and component specifications for both USA and European markets. The document outlines technical parameters for boilers, including flue gas volumes at rated and partial load temperatures, fuel characteristics, and specific technical components such as main drive, drive motor, suction turbine, combustion air blower, and electrical specifications.

The technical data sheet specifies fuel requirements for both USA and European markets, noting acceptable fuel types as untreated wood (USA) and stemwood or chemically untreated wood (Europe). Key fuel specifications include a calorific value greater than 7,200 BTU/lbs, bulk density over 40,000 Lb/cft, water content less than 10%, and ash content less than 1%. The document provides granular details on pellet dimensions, ranging from 1 1/4 to 1 1/2 inches in length and 1/4 to 5/16 inches in diameter, with an ash melting point exceeding 2,200°F. Electrical components are specified, including drive motors between 250/370W, suction turbine at 1,200W, and electrical ignition at 250W.