WindowGuardSpecifications.pdf
PDF 26 KB Posted
- Attached to
- IFB# 1379-01 Window Guards
- Solicitation number
- BD-17-1129-PR001-BHA01-00000009642
- Issued by
- Suffolk County, Massachusetts
About this file
This document provides the specifications for steel window security bars to be used in a state and local contract opportunity issued by the government of Massachusetts, specifically for Suffolk County and the City of Boston. The window guards are required to be solid steel round bars, 5/16" in diameter, welded to heavy steel channels on both sides. The bars are to be spaced 3" apart and can be mounted either horizontally or vertically. The window guards must meet the requirements of the Sterling HA1135, HA1135L, and HA1135EL or an approved equal. The contract opportunity, identified as IFB# 1379-01, seeks to procure these window guards for use within the jurisdictions of Suffolk County and the City of Boston in Massachusetts.
The document does not provide details on pricing terms, set-asides, incumbents, funding requirements, or other salient commercial information. The focus is solely on the technical specifications of the required window guards.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 5369-a.pdf | ||
| 5369.pdf | ||
| SpecCondTCWindowGuards.pdf | ||
| CorporateCertificate.doc | DOC document | |
| REAP.doc | DOC document | |
| BidAwardrev09.doc | DOC document | |
| BidForm1379-01.pdf | ||
| BidderChecklistv2.doc | DOC document | |
| GenCond30Bv2.doc | DOC document | |
| ITBTC2014.doc | DOC document | |
| InviteCommPass~18.pdf | ||
| SpecCondTC.doc | DOC document | |
| W9BHA.doc | DOC document |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WINDOW SECURITY BARS-SWING OPENING
1. Materials are to be solid steel round bars, 5/16" diameter, welded to a heavy steel channel on both sides. Each bar will consist of (4) "U" shaped channels and one (1) mounting channel.
A. (4) steel channels are .060" thick, "U" shaped channels are 11/16" OD x 15/16” deep.
Moving side channel fits into mounting channel, has a 11/32" hole at the top and bottom for a safety release clip.
B. Steel mounting channel is .060" thick, "square" shaped, 1 1/16" OD x 1-1/16" deep.
Cut out for bars are 3-13/16" apart with 7/16" ID opening, angled down approx. 45 degrees with a depth of 5/8" into channel. The mounting channel has a 11/32" hole at the top and bottom for a safety release clip.
2. The spacing between bars is 3 ½”.
3. Mounting screws are 3" in length, made of soft steel to become tamper proof once installed.
4. Light gray color, baked enamel finish.
5. Window guards can be mounted horizontal or vertical.
6. To be a Sterling HA1135, HA1135L, and HA1135EL or BHA approved equal.
File details come from the government source that posted it. Updated .