Wildlife Tandem Trailer Specs 2024.docx

UTILITY TRAILER SPECIFICIATIONS

Project: This is a bid request for the purchase of 7 (seven) new utility trailers for the Division of Wildlife, Illinois Department of Natural Resources.

The potential vendor will provide to the IDNR 7 (seven) utility trailers with the following specifications:

Steel 7’ x 14’ high-side GVRW 7K tandem utility trailer

· 14” solid steel sides with 4” tie down rail

· Wrap around frame 4” C channel

· 2 5/16” A frame coupler with safety chains

· Zinc plated HD folding jack mounted on left side of A-frame tongue

· Fold flat HD ramp gate with handle

· Spring assisted rear ramp gate with captive gate pins

· Tread plate fenders

· Spare tire carrier mounted to frame, spare tire included

· Pressure treated 2x6 decking with front and rear board retainers

· 6 total D rings mounted on front, middle, and rear of box interior

· Two (2) 3,500 lb axles with equalized leaf spring system and E-Z lube hubs

· Electric braking system on both axles

· Black powder coat finish

· 15” radial tires, wheel assembly 205 75R15 LRC

· 7-way RV style plug with breakaway kit

· Rubber mounted sealed LED lighting with gel filled connectors enclosed in tubular frame

· Aluminum tread-plate mechanically fastened and sealed flush on leading edge of box and fenders

· Minimum 2,000 lb. hand crank HD winch (with strap and hook) and mount installed at midpoint in front of and level with top of trailer box

· Winches equipped with cables shall not be accepted These trailers will be picked up at the dealer by various IDNR personnel.

Contact person: Ed Zwicker, IDNR Division of Wildlife, 826 Morton Court, Litchfield, IL 62056; 217-502-4449; ed.zwicker@illinois.gov.