A03-Purchase Description_ AVL Fueltron 300_20240802 ( Final)_Redacted.pdf
PDF 96 KB Posted
- Solicitation number
- W91ZLK-24-Q-0030
About this file
This document is a Request for Quotation (RFQ) for a fuel measurement system required by the Aberdeen Testing Center (ATC) of the U.S. Army. The solicitation seeks to procure one (1) fuel measurement system, specifically the brand-name AVL FuelTron Advanced 300 with LD/MD Extension Unit, that meets detailed technical specifications for fuel flow, density, and data output requirements. The system is required to be new and include all cables, hoses, and configuration software. The RFQ uses simplified acquisition procedures under FAR Part 12 and 13.5, and the award will be made to the Lowest Price Technically Acceptable (LPTA) offeror. Quotes are due by 10:00 AM ET on Thursday, 22 August 2024, and the contracting office is the Army Contracting Command - Aberdeen Proving Ground. The delivery address is the U.S. Army Aberdeen Test Center in Aberdeen Proving Ground, MD.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Description
Technical Specifications
Fuel Measurement System for Aberdeen Testing Center
Brand Name Only COTS AVL FuelTron Advanced 300 with LD/MD Extension Unit
GENERAL: Aberdeen Test Center (ATC) is requesting the procurement of one (1) fuel measurement system that is designed for fuel systems with return flow into the tank - diesel application. A critical requirement of the system is to not introduce a pressure drop and therefore not influence the application and measurement. This system is developed using hydraulic components such as heat exchanger, pumps and valves to measure the actual fuel use performance in highly dynamic environments. The system outputs fuel volume rate, total consumption, fuel density, fuel pressure and fuel temperature in an integrated package. The system shall be supplied with all cables, hoses and configuration software.
1. Fuel flow measurement specifications.
a. Measurement range of -30 to 300 liters/hour.
b. Measurement resolution of 0.044 Cubic Millimeters.
c. Flow data rate of 100 samples per second.
2. Fuel Density measurement specifications.
a. Measurement range of 0.6 to 1.2 grams per cubic centimeter.
b. Measurement resolution of 0.0005 grams per cubic centimeter.
c. Density data rate of 1 sample per second.
3. Maximum data output rate of 100 Hz.
4. Powered by DC voltage with input range of 10 volts to 30 volts DC.
5. Operating temperature -40 to 85 deg. C (-40 to 185 deg. F)
6. Interface support
a. CAN bus Input/output
b. Analog
c. Digital I/O - frequency
d. Ethernet
7. Delivery Address:
US Army Aberdeen Test Center 6850 Lanyard Road B358
APG, MD 21005
File details come from the government source that posted it. Updated .