01 Amendment01C_20R0181.pdf

411TH CSB, KOREA - CONST & SUPPLY TEAM

POC: KIM, NAM SUN

TEL: 0503-355-3355/315-755-3355

NAMSUN.KIM3.LN@MAIL.MIL

APO AP 96271

UNITED STATES

0011506588-0001

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The Purpose of this Amendment is to:

1. Provide responses/answ ers to questions received

2. The description for CLIN 0001 thru 0007 w as updated and reference in Revised Material Lists.

3. The closing date w as extended to 2 September 2020 at 1300 hrs (Korea Time)

4. All other terms and condition of this solicitation remains the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 6

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 27-Aug-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W91QVN20R0181

X 9B. DATED (SEE ITEM 11)

10-Aug-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Aug-2020

CODE

411TH CONTRACTING SUPPORT BRIGADE, KOREA

NAME: JUVON ALLGOOD

PHONE #: 315 730-4209

APO AP 96271

UNITED STATES

W91QVN 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W91QVN

FACILITY CODECODE

EMAIL:TEL:

W91QVN20R0181

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 19-Aug-2020 01:00 PM to 02-Sep-2020 01:00 PM.

The following have been added by full text:

QUESTIONS AND ANSWERS

1.QUESTION:

Item number 6 and 7 has specified fiber distribution panels that will not hold splice trays. Can fuse lite connectors and fan out kits (cut sheet A & B) be used instead of item number 8 or can we use fiber cassettes (cut sheet C) instead of CCH connectors panels and pig tails?

ANSWER:

We cannot accept the vendor's product because we have already designed the project with the requested products.

2.QUESTION:

Line 7 has a description to include blank modules, what specific P/N from Corning can they reference for the "Blank Module" if it needs to be included? Line 7 the way described in the solicitation does not have the capability to terminate any fiber in it like line 6 does, line 6 identifies the adapter panels (CCH-CP12-59). Does line 7 also need 2EA of the CCH-CP12-59's included as well? Please confirm the full description or equal part numbers for below:

ANSWER:

We need a blank module to block it and there is no P/N of the blank module and for item 0007, 2EA , CH-CP12-59 should be provided if the vendor supply Corning product.

3.QUESTION:

Item 6, CCH-04U, #1. Do you need CSH-3U : "included cable tray" - do you need Cable Splice Housing as this CSH-3U is option items.

#2. Cable tray Core count - Do you need 12 Core Splicing Tray or 24 Core Splicing Tray.

ANSWER:

#1: I don't need CSH-3U.

#2: N/A

4.QUESTION:

#1. The spec states PE insulated fiber core, all dielectric single HDPE jacket non-armor. PE insulated fiber core is kind of odd as it is defined. We can provide a gel free loose tube cable with an HDPE jacket. Is this acceptable?

#2. Also each of the items state 6 fiber bundle which I interpret as 6 fibers per tube. That is very low for such higher fiber counts. We would do 12 fibers per tube on all of the fiber counts, is that ok?

ANSWER:

#1: Gel free tube is acceptable.

#2: We only need 6 cores per bundle.

REVISED MATERIAL LISTS.

Note: This Revised Material Lists will be uploaded to BetaSAM.

NO Item P/N MANUFACTURE DESCRIPTION QTY UNIT

Fiber Optic Cable, SM-144C

Single Mode 144 Core ITU657A1 Fiber Optic Cable Cable Description: Attenuation 0.22dB @1550nm per kilometer, Max

0.2 ps/?km (20 section link) PMD, Attenuation vs. Bending (10mm radius x 1turn) max 0.75 dB @ 1550 nm, Loose tube, Dry cored, PE insulated fiber core, all dielectric single HDPE jacket non-amor, max.

20D Mandrel diameter, 6 Fiber per Bundle , comply ITU-T G.657 and suitable underground conduit use.

Note: A gel free loose tube cable with an HDPE jacket is acceptable

1,300M x 1RL , 6,700M x 1RL, 5,800M x 1RL and 5,200M x 1RL

Vendors shall be required to provide the fiber optic cable test result report when the products are delivered to the designated location

19,000 MT

Fiber Optic Cable, SM-96C

Single Mode 96 Core ITU657A1 Fiber Optic Cable Cable Description: Attenuation 0.22dB @1550nm per kilometer, Max

0.2 ps/?km (20 section link) PMD, Attenuation vs. Bending (10mm radius x 1turn) max 0.75 dB @ 1550 nm, Loose tube, Dry cored, PE insulated fiber core, all dielectric single HDPE jacket non-amor, max.

20D Mandrel diameter, 6 Fiber per Bundle, comply ITU-T G.657 and suitable underground conduit use.

Note: A gel free loose tube cable with an HDPE jacket is acceptable

2,800Mx1RL

Vendors shall be required to provide the fiber optic cable test result report when the products are delivered to the designated location

2,800 MT

Fiber Optic Cable, SM-48C

Single Mode 48 Core ITU657A1 Fiber Optic Cable Cable Description: Attenuation 0.22dB @1550nm per kilometer, Max

0.2 ps/?km (20 section link) PMD, Attenuation vs. Bending (10mm radius x 1turn) max 0.75 dB @ 1550 nm, Loose tube, Dry cored, PE insulated fiber core, all dielectric single HDPE jacket non-amor, max.

20D Mandrel diameter, 6 Fiber per Bundle , comply ITU-T G.657 and suitable underground conduit use.

Note: A gel free loose tube cable with an HDPE jacket is acceptable

3,200M x 1RL

Vendors shall be required to provide the fiber optic cable test result report when the products are delivered to the designated location

3,200 MT

Fiber Optic Cable, SM-24C

Single Mode 24 Core ITU657A1 Fiber Optic Cable Cable Description: Attenuation 0.22dB @1550nm per kilometer, Max

0.2 ps/?km (20 section link) PMD, Attenuation vs. Bending (10mm radius x 1turn) max 0.75 dB @ 1550 nm, Loose tube, Dry cored, PE insulated fiber core, all dielectric single HDPE jacket non-amor, max.

20D Mandrel diameter, 6 Fiber per Bundle , comply ITU-T G.657 and suitable underground conduit use.

Note: A gel free loose tube cable with an HDPE jacket is acceptable

3,600M x 1RL Vendors shall be required to provide the fiber optic cable test result report when the products are delivered to the designated location

3,600 MT

Fiber Optic Cable, SM-12C

Single Mode 12 Core ITU657A1 Fiber Optic Cable Cable Description: Attenuation 0.22dB @1550nm per kilometer, Max

0.2 ps/?km (20 section link) PMD, Attenuation vs. Bending (10mm radius x 1turn) max 0.75 dB @ 1550 nm, Loose tube, Dry cored, PE insulated fiber core, all dielectric single HDPE jacket non-amor, max.

20D Mandrel diameter, 6 Fiber per Bundle , comply ITU-T G.657 and suitable underground conduit use.

Note: A gel free loose tube cable with an HDPE jacket is acceptable

6,000M x 1RL and 6,800M x 1RL Vendors shall be required to provide the fiber optic cable test result report when the products are delivered to the designated location

12,800 MT

Fiber Distribution Patch Panel (Rack Type) - 4U

CCH-04U Corning

Brand name or equivalent Corning Cable System CCH-04U Closet Connector Housings - Holds 12 CCH Connector Panels Included CCH Connector Panel (CCH-CP12-59) 6 Duplex SC(12Core)-12ea with Blank Module-12ea, Included Cable Trays to be able to accommodate 144 cores of the fiber optic cable regardless of the quantity of the cable tray and accommodate 144 cores of the fiber optic cable

12 SET

Fiber Distribution Patch Panel (Rack Type) - 1U

CCH-01U Corning

Brand name or equivalent Corning CCH-01U Closet Connector Patch Panel Housings - Holds 2 CCH Connector Panels, Included CCH Connector Panel (CCH-CP12-59) 6 Duplex SC(12Core)-2ea with Blank Module - 2ea, Included Cable Tray to be able to accommodate 24 cores of the fiber optic cable regardless of the quantity of the cable tray and accommodate 24 cores of the fiber optic cable.

30 SET

SM-12 Core SC Pigtail

SM-12 Core SC Pigtail , Fanout Cord-6.6ft.

170 EA

Fiber Optic Splice Closure, 144 Core for Duct

FO Splice Manhole Closure (for 144 Cores)

- In-line type closure

- Either single-loose fibers or ribbon fibers are available

- Either heat-shrink sleeves or mechanical splice sleeves are available

- Robust mechanism for clamping the cable sheath

- Accept additional cables without removal of the sheath retention or disturbing existing splices

- Do not require special tool or equipment for installation.

7 EA

Fiber Optic Splice Closure, 96 Core for Duct

FO Splice Manhole Closure (for 96 Cores)

- In-line type closure

- Either single-loose fibers or ribbon fibers are available

- Either heat-shrink sleeves or mechanical splice sleeves are available

- Robust mechanism for clamping the cable sheath

- Accept additional cables without removal of the sheath retention or disturbing existing splices

- Do not require special tool or equipment for installation.

4 EA

Fiber Optic Splice Closure, 48 Core for Duct

FO Splice Manhole Closure (for 48 Cores)

- In-line type closure

- Either single-loose fibers or ribbon fibers are available

- Either heat-shrink sleeves or mechanical splice sleeves are available

- Robust mechanism for clamping the cable sheath

- Accept additional cables without removal of the sheath retention or disturbing existing splices

- Do not require special tool or equipment for installation.

24 EA

NO Item P/N MANUFACTURE DESCRIPTION QTY UNIT

MaxCell Fabric Innerduct with 3cells

MaxCell Fabric Innerduct with 3cells

- Fabric breaking tensile > 41.8 kg/cm

- Low coefficient of friction – Dynamic COF of 0.12 on HDPE

- Pull tapes pre-installed in each cell (225 kg, 565 kg, 815 kg, 1,135 kg, or MaxGlide)

- Product pre-lubricated to further lower tension during cable pulls

- Life span of approximately 30 years

- Not affected by climate & Temperature range is – 30 to 100

- UL 2024A LSZH Plenum Rating FR versions for inside plant usage

- Max. cable OD 28mm and Width 64mm, 3 Cells type

- Orange Color and OptiCell

1,000M x 7RL, 800M x 1RL and 500M x 1RL

8,300 MT

13 1 LOT

Shipping Charge

Door to Door shipping 1st SIG BDG, C4I Distribution Center, Bldg S-1043, Camp Humphreys, Pyeongtaek City, Repulic of Korea 17981, The following have been deleted:

SALIENT CHARATERISTICS

(End of Summary of Changes)