W91QVN18R0067_final.pdf

SEE ADDENDUM

(No Collect Calls)

W91QVN18R0067 27-Apr-2018

b. TELEPHONE NUMBER

02-7914-3200

8. OFFER DUE DATE/LOCAL TIME

03:00 PM 09 May 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W91QVN9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

MS. YUN, SU-OK

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

411TH CONTRACTING SUPPORT BRIGADE, KOREA

RCC YONGSAN, UNIT #15289

APO AP 96205-5289

UNITED STATES OF AMERICA (THE)

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: 755-0638 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$15,000,000

NAICS:

238390

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W91QVN18R0067

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot Furniture

FFP

See Pricing Schedule with Performance Work Statement (PWS).

FOB: Destination

PSC CD: 7110

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Furniture_Non listed items.

FFP

This CLIN may be used for items not listed/priced in CLIN 0001 but falling within the scope of FSC Code of Blanket Purchase Agreement. As requirement are established, a BPA call will place an order to the BPA holders and RFQ for all calls above micro purchase threshold will be posted to the BPA holders for the competition. The contractor shall provide all necessary furniture for USFK Wide based on call orders received for Area I, II, III, IV, Osan Air base, and Kunsan Air base, Korea-Wide.

NET AMT

SUPPLY SERVICE AND PRICE

BPA Master Dollar Limit: $1,000,000

BPA Call Limit: $150,000

Period of Performance: 1-Jun-2018 or the date of agreement, whichever is later, thru 31-May-2021

FSC Code:

7105 Household Furniture 7110 Office Furniture 7125 Cabinets, Lockers, Bins and Shelving 7195 Miscellaneous Furniture and Fixtures

BLANKET PURCHASE AGREEMENT

NOTICE TO OFFEROR: THIS IS MULTIPLE BLANKET PURCHASE AGREEMENTS (BPA) FOR

VARIOUS FURNITURE. THE PRICES OFFERED WILL BE USED FOR NOT ONLY AWARDING THE

ORDER BUT ESTABLISHING BPAs.

A. PERIOD OF PERFORMANCE : 1-Jun-2018 or the date of agreement, whichever is later, thru 31-May-2021

B. ITEM DESCRIPTION (FSC Code and Description: 7105/7110/7125/7195 – Furniture)

1. CLIN 0001: See Pricing Schedule with Performance Work Statement (PWS) as attached.

2. CLIN 0002: None listed items–This CLIN may be used for items that are within the scope of the FSC Code(7105/7110/7125/7195).

C. PRICE SCHEDULE AND DELIVERY & INSTALLATION INFORMATION: Individual call will be specified with price schedule and delivery and installation information.

D. DELIVERY & INSTALLATION INFORMATION: Delivery and installation shall be FOB destination or as specified on each call to be accomplished by the supplier. Individual call will be specified with delivery and installation information.

E. GENERAL TERMS AND CONDITIONS:

1. Description of Agreement: The purpose of this solicitation is to enter into Multiple Blanket Purchase Agreement (BPAs) to provide the necessary and required various furniture under listed Federal Supply Class (FSC) Code in Korea Wide specified hrerein. Specific location, requirement will be identified and issued with BPA call as needed.

2. Extent of Obligation: The Government is obligated only to the extent of authorized purchases actually made under the BPA.

3. Purchase limitation: Individual purchases under this BPA SHALL NOT EXCEED $1,000,000 (Per Year).

Authorized individual(s) whose organizational component is 411th CSB shall not exceed $150,000.

4. Call Officer

4.1. The Contracting Officer of 411th CSB will be Call Officer.

4.2. Calls placed by unauthorized individuals and accepted by the supplier will not be approved for payment.

5. Invoices: The invoice shall be submitted electronically through Wide Area Work Flow – Receipt and Acceptance (WAWF) at the web site https://wawf.eb.mil.

6. Administrative Responsibilities:

6.1. The supplier is responsible for;

6.1.1. Submission of an invoice electronically through Wide Area Work Flow (WAWF) at the web site https://wawf.eb.mil no later than 7 days after the end of the billing period (25th through 24th of the following month).

6.2. The Receiving Officer is responsible for;

6.2.1. Process the invoice through Wide Area Work Flow (WAWF)

6.2.2. The Receiving Officer will be specified at individual call.

7. SPECIFICATIONS: All suppliers to be furnished under this BPA shall be of the best commercial quality which meet specification stated in individual call.

CLIN 0001 PRICING SCHEDULE

SALIENT CHARACTERISTICS

Description Qty Unit of

Issue Unit Price Amount

1 4 ft round team table 4 Each

2 Carrel 23 Each

3 Coffee Table 3 Each

4 Desk Chair 96 Each

5 L-shaped Desk 6 Each

6 Sofa 7 Each

7 Team Table Chairs 48 Each

8 Under-the-desk Filing Cabinet 80 Each

9 10 ft x 4 ft Conference Table 1 Each

10 6 ft Long Desk 58 Each

11 4 ft Long Desk 6 Each

12 Green CAT 6 Cables (varying length) 197 Each

13 Purple CAT 6 Cables (varying length) 188 Each

14 Red CAT 6 Cables (varying length) 39 Each

15 Storage Container 1 Lot

16 Removal and Storage of existing furniture 1 Job

17 Delivery and installation of new furniture 1 Job

Total Amount:

**All items are brand name, or equal

T-1 10 ft x 4 ft Conference Table

Item Description Example Image Manufacturer

Type

Size

Features

Warranty

Bush Industries, Inc., or equal

Engineered wood conference table

10’L x 4’W

• Scratch Resistant

• Stain Resistant

• Cable Management

• Edge Banding

• 120 inch L x 48 inch W (+/- 6 in)

• 1.5 inch thick table top (+/- 1 in)

• 28 inch high (+/- 2 in)

• Boat Top Conference Table

• Dark wood laminate finish (match other tables)

• Stain/Scratch resistant

• Adjustable glides to level the desk on uneven surfaces

5+ years

T-2 4 ft Round Team Table

Item Description Example Image Manufacturer

Type

ICEBERG Enterprises, or equal

Engineered wood round pedestal table with metal base

48”Dia

• Scratch Resistant

• Stain Resistant

• Cable Management

• Edge Banding

• 48 inch round (+/- 6 in)

• 1.5 inch thick table top (+/- 1 in)

• 28 inch high (+/- 2 in)

• Round top meeting table

• Dark wood laminate finish (match other tables)

• Stain/Scratch resistant

• Adjustable glides to level the desk on uneven

T-4 Coffee Table

HON, or equal

Engineered wood laminate coffee table

48"W x 18"H x 20"D

• Scratch Resistant

• Stain Resistant

• Cable Management

• Edge Banding

• 48 inch L x 20 inch W (+/- 6 in)

• 1.5 inch thick table top (+/- 1 in)

• 18 inch high (+/- 2 in)

• Square top coffee table

• Dark wood laminate finish (match sofa legs)

• Stain/Scratch resistant

• Adjustable glides to level the desk on uneven

CH-1 Desk Chair

Manufacturer

Type

Basyx, or equal

Executive desk chair

24"W x 48"H x 18"D Seat (+/- 2 inches)

• Scratch Resistant

• Stain Resistant

• Metal pedestal style base

• 5 caster wheels

• Adjustable height

• Adjustable lumbar support

• Adjustable arm rests

• Adjustable tilt

• Faux leather or vinyl cushion seat

• Fabric mesh back

• Black, dark gray, or graphite finish base

• Black, dark gray, or graphite fabrics

5+ Years

CH-4 Team Table Chair

Office Star, or equal

Rolling task chair

24"W x 36"H x 18"D Seat (+/- 2 inches)

• Scratch Resistant

• Stain Resistant

• Metal pedestal style base

• 5 caster wheels

• Adjustable height

• Fabric or vinyl cushion seat

• Fabric mesh lumbar support back

• Black, dark gray, or graphite finish base

• Black, dark gray, or graphite fabric

5+ Years

D-1 L-Shaped Desk (Left Corner Credenza)

Manufacture r

Type

Lorell, or equal

Laminate credenza with left return

30"D x 69"W x 30"H w/48”D return

• Scratch Resistant

• Stain Resistant

• Cable Management

• Edge Banding

• 69 inch L (+/- 6 in)

• 48 inch D return (+/- 6 in)

• 30 inch D desk (+/- 6 in)

• 1.5 inch thick table top (+/- 1 in)

• 30 inch high (+/- 2 in)

• Dark wood laminate finish (match coffee tables)

• Adjustable glides to level the desk on uneven

D-3 6’ Long Desk

HON, or equal

Engineered wood laminate desk with metal legs

72"W x 30"H x 30"D

• Scratch Resistant

• Stain Resistant

• Cable Management

• Edge Banding

• 72 inch L x 30 inch W (+/- 6 in)

• 1.5 inch thick table top (+/- 1 in)

• 30 inch high (+/- 2 in)

• Light gray laminate finish

• Stain/Scratch resistant

• Adjustable glides to level the desk on uneven surfaces

• Metal legs

D-4 Carrel

Manufacture r

Type

Moore Co. , or equal

Engineered wood laminate carrel desk

36”W x 30”D x 30” Desk H

• Scratch Resistant

• Stain Resistant

• Cable Management

• Edge Banding

• 36 inch L x 30 inch W (+/- 6 in)

• 1 .5 inch thick table top (+/- 1 in)

• 30 inch high (+/- 2 in)

• Light wood laminate finish

• Stain/Scratch resistant

• Adjustable glides to level the desk on uneven surfaces

• Integrated 24 inch privacy walls on 3 sides

5+ year

D-5 4 ft Long Desk

Academia Computer Desk Div, or equal

Engineered wood laminate console with metal legs

48”W x 30”D

• Scratch Resistant

• Stain Resistant

• Cable Management

• Edge Banding

• 48 inch L x 30 inch W (+/- 6 in)

• 1.5 inch thick table top (+/- 1 in)

• 30 inch high (+/- 2 in)

• Light wood laminate finish

• Stain/Scratch resistant

• Adjustable glides to level the desk on uneven surfaces

• Metal legs

LF-1 Under-the-desk Filing Cabinet

Manufacturer

Type

Bush Industries Inc. , or equal

3 Drawer under desk filing cabinet

16”W x 20”D x 28”H (+/- 2 inches)

• Two box drawers hold small office supplies

• File drawer opens on full-extension, ball-bearing slides

• One lock secures bottom two drawers

• File drawer holds letter- or legal-size files

• Casters for easy mobility when loaded

• Must fit under 6’ desks (D-3)

• Finish to match/be darker in shade than light laminate desks

SF-1 Sofa

Rodco Brandt, or equal

2 person sofa

32”L x 48”W x 36”H (+/- 6 inches)

• Scratch Resistant

• Stain Resistant

• Edge Banding

• Dark wood laminate finish legs (match coffee tables)

• Vynil, faux leather, or other wipe-clean fabric

• Brown or blue fabric

• Adjustable glides to level the desk on uneven surfaces

FURNITURE DELIVERY REQUIREMENT

The contractor shall provide copies of the test reports and certifications based upon the most recent edition of the ANSI/BIFMA when furniture is delivered. If the contractor(s) is/are local vendor(s), it shall provide the following in place of ANSI/BIFMA reports & certificates with the furniture and/or chair:

i) Eco-friendly Material Class E0 Test Result (Korean: 친환경자재등급기준 E0 시험성적서)

ii) Certificate of Direct Production issued by ROK Small Business Corporation (Korean:중소기업중앙회장이

발행한직접생산확인증명서 )

iii) Test Result for Metal Coating and Hinge of Furniture (Korean: 내식성/내구성 시험성적서)

iv) Test Result for Quality, Strength and Coating of Chair (Korean: 품질, 강도, 도막 시험성적서)

v) Production Quality Mark in each item and Quality Assurance Certification for all items (Korean: 품질표시표 &

품질보증서)

If the contractor fails to provide the above items, the payment will not be made until provided.

Performance Work Statement For CLIN 0001 Office Furniture for Bldg 933, 1st Floor, Basement, & Sub-Basement, and

Office Furniture Rearrangement for Bldg 1601 Osan Air Base, South Korea

PERIOD OF PERFORMANCE:

Desirable Period of Performance is fifty-two (52) calendar days after receipt of contract. All phases consist of approximately ten (10) calendar days encompassing two full weekends. Weekend work is preferred and technical contact will provide weekend oversight and/or escort.

RECEIVING OFFICER (RO):

1st Lt Andrew P. Bossert, andrew.bossert.1@us.af.mil, DSN: 315-784-8760, Commercial: 011-82-505-784- 8760, 607, 607th Air Support Operations Group (US Air Force)

TECHNICAL CONTACT:

Capt John H. Nussbaum, john.nussbaum.1@us.af.mil, DSN: 315-784-6963, Comm: 011-82-505-784-6963, 7th Air Force (US Air Force)

MSgt Julius J. Jackson, julius.jackson.1@us.af.mil, DSN : 315-784-6276, Comm: 011-82-505-784-6276, 7th Air Force (US Air Force)

THREE (3) PHASES: Initiate Phase 1 within 7 days of receipt of the BPA Call. The contractor shall begin Phase 2 no earlier than 5 working days after completion of Phase 1. Receiving officer contract the contractor to begin Phase 2 sooner than the 5 working day waiting period. Additionally, the Receiving officer shall grant the contractor access to portions of Phase 3 in advance of the completion of Phase 1 or 2. Otherwise, the contractor shall begin Phase 3 no sooner than 5 days after completion of Phase 2.

TEMPORARY STORAGE REQUIREMENT: All phases require storage container(s) provided and placed by the contractor in the parking lots adjacent to Bldg 1601 and Bldg 1384. These containers shall be placed in such a manner as to minimize the impact to parking spaces and maintain access to heating oil tanks and facilities. The government may remove furniture from the storage container(s) for use in other office spaces. Upon completion of Phase 3, the contractor shall remove these storage containers and all remaining furniture and may dispose, recycle, or resell the furniture as desired. Any damage to the parking lots or surrounding facilities shall be repaired by the contractor at the contractor’s expense.

Phase 1 – Bldg 933, Ground Floor and Basement Floor. Desired Period of Performance, 10 days including 2 weekends (preferred to be 1 June 2018 through 10 June 2018). Initiate Phase 1 within 3 days of receipt of the BPA call. Contractor shall leave no less than 3 days between the removal of furniture and the installation of new furniture in each room. All phases require storage container(s) provided and placed by the contractor in the parking lot adjacent to Bldg 1601 and Bldg 1384. These containers shall be placed in such a manner as to minimize the impact to parking spaces and maintain access to heating oil tanks and facilities.

Room 107, A4 Command Suite. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean room. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities:

(3) L-shaped desks, (2) 4’ round table, (17) team table chairs, (9) carrels, (6) desk chairs, (3) sofas, (1) coffee table,

(3) under-the-desk filing cabinets, (15) Cat-6 cables.

Room 112, A4 Workstation Office. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean offices. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities:

(3) L-shaped desks, (3) under-the-desk filing cabinets, (3) desk chairs, (3) Cat-6 cables

Room B-101, GEOBASE Office. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean room. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities:

(6) 6’ desks, (6) desk chairs, (6) under-the-desk filing cabinets, (18) Cat-6 cables mailto:andrew.bossert.1@us.af.mil mailto:john.nussbaum.1@us.af.mil mailto:julius.jackson.1@us.af.mil

Room B-103, Conference Room. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean room. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities:

(1) 10’x4’ table, (2) 4’ desks, (10) rolling conference room chairs, (9) team table chairs, (3) Cat-6 cables

Room B-130, SIPR Café, and Room B-129, A4M/W Office. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean room. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities: (7) carrels, (7) team table chairs, (11) under-the-desk filing cabinets, (4) 6’ desks, (4) desk chairs, (15) Cat-6 cables

Room B-128, CALC Floor. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean room. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities: (18) 6’ desks, (18) desk chairs, (18) filing cabinets, (1) 4’ desk, (38) Cat-6 cables

Phase 2 – Bldg 933 Basement. Desired Period of Performance, 10 days including 2 weekends (22 June 2018 through 1 July 2018). The contractor shall begin Phase 2 no earlier than 5 working days after completion of Phase

1. Receiving Officer coordinate the contractor to begin Phase 2 sooner than the 5 working day waiting period.

Contractor shall leave no less than 3 days between the removal of furniture and the installation of new furniture in each room. All phases require storage container(s) provided and placed by the contractor in the parking lot adjacent to Bldg 1601 and Bldg 1384. These containers shall be placed in such a manner as to minimize the impact to parking spaces and maintain access to heating oil tanks and facilities.

Room B-108 CA7 Cell. Re-arrange existing furniture, including L-shaped desks, square desks, and partition walls, as shown on drawing. Vacuum and clean offices. Install new chairs and under-the-desk filing cabinets as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities: (24) desk chairs, (16) under-the-desk filing cabinets, (32) Cat-6 cables

Rooms B-106/107, CFPC Offices. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean offices. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities:

(12) 6’ desks, (12) desk chairs, (12) under-the-desk filing cabinets, (24) Cat-6 cables

Room B-124/125/126/127 CALC Overwatch and Back Rooms. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean room. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Quantities: (7) carrels, (10) 6’ desks, (10) desk chairs, (7) team table chairs, (27) Cat-6 cables.

Contingency Furniture Storage. Procure, assemble, and move into storage in Bldg 933 as directed (5) 6’ desks.

Select (50) desk chairs which were either previously removed from Bldg 933 or are currently in Bldg 1601 that are in good condition. Good condition is defined as all wheels are operational, arms and back in good condition, fabric is untorn and not discolored. Move these chairs into storage spaces as directed by the Receiving Officer.

Phase 3 – Bldg 933 Subbasement and Bldg 1601. Desired Period of Performance, 10 days including 2 weekends (13 July 2018 through 23 July 2018). The receiving officer may grant the contractor access to portions of Phase 3 in advance of the completion of Phase 1 or 2. Otherwise, the contractor shall begin Phase 3 no sooner than 5 days after completion of Phase 2.

Bldg 933, Rooms SB-201 Collaboration Room, SB-203 A4W Office, and SB-204 A4X Office. Disassemble and remove existing furniture, desks, cabinets, chairs, and communication cables. Vacuum and clean room. Store disassembled existing office furniture in portable storage container at Bldg 1601. Install new office furniture, desks, tables, cabinets, and chairs as shown on drawing. Install Cat-6 cable (with extra 1-meter slack) from nearest wall port to each workstation as shown on drawing. Room SB-201 Quantities: (2) 4’ round table, (2) coffee tables, (3) 4’ desks, (4) sofas, (8) team table chairs, (3) Cat-6 cables. Room SB-203 Quantities: (4) 6’ desks, (4) desk chairs, (12) Cat-6 cables, (4) under-the-desk filing cabinets. Room SB-204 Quantities: (4) 6’ desks, (4) desk chairs, (12) Cat-6 cables, (4) under-the-desk filing cabinets.

Bldg 1601, all rooms. All furniture removed from Bldg 933 may be used to meet the requirements in Bldg 1601, no new furniture shall be purchased for Bldg 1601. Activities in Bldg 1601 shall be completed without delays between removing and installing furniture. The contractor shall ensure all furniture installed provides usable desk space, defined as no less than 3’ x 2’ clear desk space and 3’ by 5’ of clear floor space directly in front of the desk space with no furniture stacked or unusable. See attached schematics for a diagram. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 1. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 5 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 2. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 6 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm A1. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 6 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) red Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm A2. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 6 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) red Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 3. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 2 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 4. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 2 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 5. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 8 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 6. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 2 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 7. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 6 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 8. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 2 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 9. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 4 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 10. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 6 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 12. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 8 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 13. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 8 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters

Bldg 1601, Rm 15. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 6 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 16. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 8 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm. 17. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 2 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 20. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 25 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 21. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 2 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters of cable per work station.

Bldg 1601, Rm 22. Contractor shall move all existing furniture within Bldg 1601 and add any furniture removed from Bldg 933. Contractor shall remove any furniture currently in this room. Contractor shall provide no less than 2 work stations in this room between the existing furniture in the room, within Bldg 1601, or the furniture in storage that was removed from Bldg 933. Install one (1) green and one (1) purple Cat-6 cable (with extra 1-meter slack) from nearest wall port to each work station. If no port is available on the wall, the contractor shall provide 8 meters

ADDENDUM TO FAR 52.212-1, INSTRUCTIONS TO THE OFFEROR(S)

QUOTATION INFORMATION & REQUIREMENT

1. Quotations shall be submitted to the Federal Business Opportunities (FBO) website (https://www.fbo.gov/), or if FBO is not available, email to suok.yun.ln@mail.mil with the evidence document such as screen shot. The FBO unavailability is limited to ONLY FBO server problem not individual failure/problem. All questions should be emailed to suok.yun.ln@mail.mil within five (5) days after the solicitation is issued. The electronic bid shall be submitted by the closing date and time of the solicitation. Partial quotation will not be acceptable.

2. The offeror(s) shall submit the following requirements IAW Para 1 above.

a. Technical Proposal: The contractor shall submit the detailed specification with drawing for the proposed items along with the quotation, even if the quoter proposed the same item. Quoters who fail to submit all of the specified information will not be considered for award. Note: Copy and paste of salient characteristics of RFQ with each item in the quotation is not acceptable and will not be considered for an award.

b. Price Schedule. The price schedule in the item list shall be used to evaluate price for establishing BPAs.

3. Failure to submit the paragraph 2 above requirements shall be grounds for determining the offer technically unacceptable, and ineligible for contract award.

4. The terms “Quotation” and “Quoter” shall be substituted for “Offer” and “Offeror” in this solicitation.

5. In accordance with FAR 25.1002, solicitations for contracts to be entered into and performed in Korea, to ensure a fair evaluation of offers, the Government will use the US Government current fiscal year conversion rate of W1,156.12 per US $1.00.

6. Quoters are urged and expected to inspect the site where the work will be performed.

The site visit will take place at:

i) Location: Meet at main gate, Osan Air Base.

ii) Date: 4 May 2018

iii) Time: 1000 hrs

iv) Point of Contract: Maj John Stiles, email: john.stiles.1@ua.af.mil Cell: 010-2292-8214

Note: If the contractor need to escort on post, please provide the attendance list (Name, Phone number, Company name) to me via email, by COB, 3 May 2018. The contractor shall bring KN ID card (주민등록증) for escort.

7. PRE-AWARD SURVEY: A pre-award survey may be conducted on any offerors. The pre-award survey is to determine the prospective contractor’s responsibility in accordance with FAR Part 9.104-1. Information may be requested as required by the Contracting Officer and the information shall be submitted within three (3) working days of the request.

(End of Summary of Changes)

BASIS OF AWARD

The Government will establish BPAs with three (3) ~ five (5) vendors, or more resulting from this solicitation to the responsible quoter having submitted the lowest-priced quotation that satisfies all terms and conditions of this solicitation. The following items and quantities shall be used to evaluate quotations. The proposed unit prices shall be used to establish BPAs. The following factors shall be used to evaluate quotations.

mailto:suok.yun.ln@mail.mil mailto:suok.yun.ln@mail.mil

►Factor A. Technical

►Factor B. Past Performance (See DFARS 252.213-7000 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System--Statistical Reporting in Past Performance Evaluations)

►Factor C. Price

Note 1: To be determined responsible, a prospective contractor must meet FAR 9.104-1 General standards.

Note 2: To be determined technically acceptable, the submitted specification must meet salient characteristics stated in this solicitation.

(End of clause)

CLAUSES INCORPORATED BY REFERENCE

52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

OCT 2016

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters

JUL 2013

52.211-6 Brand Name or Equal AUG 1999 52.212-1 Instructions to Offerors--Commercial Items JAN 2017 52.212-3 Alt I Offeror Representations and Certifications--Commercial

Items (NOV 2017) Alternate I

OCT 2014

52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017 52.212-5 (Dev) Contract Terms and Conditions Required to Implement

Statutes or Executive Orders--Commercial Items (Deviation 2013-O0019)

JAN 2018

52.225-14 Inconsistency Between English Version And Translation Of Contract

FEB 2000

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

DEC 2013

52.237-1 Site Visit APR 1984 52.247-34 F.O.B. Destination NOV 1991 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

OCT 2016

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

OCT 2015

252.211-7003 Item Unique Identification and Valuation MAR 2016 252.213-7000 Notice to Prospective Suppliers on Use of Past Performance

Information Retrieval System--Statistical Reporting in Past Performance Evaluations

JUN 2015

252.225-7012 Preference For Certain Domestic Commodities DEC 2017 252.225-7041 Correspondence in English JUN 1997 252.225-7993 (Dev) Prohibition on Providing Funds to the Enemy (Deviation

2015-O0016)

SEP 2015

252.229-7000 Invoices Exclusive of Taxes or Duties JUN 1997 252.232-7008 Assignment of Claims (Overseas) JUN 1997

252.232-7010 Levies on Contract Payments DEC 2006 252.233-7001 Choice of Law (Overseas) JUN 1997 252.243-7001 Pricing Of Contract Modifications DEC 1991

CLAUSES INCORPORATED BY FULL TEXT

52.209-5 CERTIFICATION REGARDING RESPONSIBILITY MATTERS (OCT 2015)

(a)(1) The Offeror certifies, to the best of its knowledge and belief, that-

(i) The Offeror and/or any of its Principals-

(A) Are ( ) are not ( ) presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;

(B) Have ( ) have not ( ), within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a public (Federal, State, or local) contract or subcontract; violation of Federal or State antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property (if offeror checks “have”, the offeror shall also see 52.209-7, if included in this solicitation); and

(C) Are ( ) are not ( ) presently indicted for, or otherwise criminally or civilly charged by a governmental entity with, commission of any of the offenses enumerated in paragraph (a)(1)(i)(B) of this provision.;

and

(D) Have , have not , within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied.

(1) Federal taxes are considered delinquent if both of the following criteria apply:

(i) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.

(ii) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.

(2) Examples. (i) The taxpayer has received a statutory notice of deficiency, under I.R.C. Sec. 6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.

(ii) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. Sec. 6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.

(iii) The taxpayer has entered into an installment agreement pursuant to I.R.C. Sec. 6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.

(iv) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. 362 (the Bankruptcy Code).

(ii) The Offeror has ( ) has not ( ), within a three-year period preceding this offer, had one or more contracts terminated for default by any Federal agency.

(2) Principal, for the purposes of this certification, means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager;

head of a division or business segment; and similar positions).

(b) The Offeror shall provide immediate written notice to the Contracting Officer if, at any time prior to contract award, the Offeror learns that its certification was erroneous when submitted or has become erroneous by reason of changed circumstances.

(c) A certification that any of the items in paragraph (a) of this provision exists will not necessarily result in withholding of an award under this solicitation. However, the certification will be considered in connection with a determination of the Offeror's responsibility. Failure of the Offeror to furnish a certification or provide such additional information as requested by the Contracting Officer may render the Offeror nonresponsible.

(d) Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render, in good faith, the certification required by paragraph (a) of this provision. The knowledge and information of an Offeror is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings.

(e) The certification in paragraph (a) of this provision is a material representation of fact upon which reliance was placed when making award. If it is later determined that the Offeror knowingly rendered an erroneous certification, in addition to other remedies available to the Government, the Contracting Officer may terminate the contract resulting from this solicitation for default.

(End of provision)

52.222-50 COMBATING TRAFFICKING IN PERSONS (MAR 2015) ALTERNATE I (MAR 2015)

As prescribed in 22.1705(b), substitute the following paragraph in place of paragraph (c)(1)(i) of the basic clause:

(i)

(A) The United States Government's zero tolerance policy described in paragraph (b) of this clause; and

(B) The following directive(s) or notice(s) applicable to employees performing work at the contract place(s) of performance as indicated below:

Document Title: USFK Regulation 190-2 Document may be obtained from:

http://8tharmy.korea.army.mil/g1_AG/Programs_Policy/UploadedFile/USFK/USFK_Reg_190-2_Off- Limits_Areas_and_Establishments.pdf

Document Title: USFK Command Policy Letter #12 http://8tharmy.korea.army.mil/g1_AG/Programs_Policy/UploadedFile/USFK/USFK_Reg_190-2_Off-Limits_Areas_and_Establishments.pdf http://8tharmy.korea.army.mil/g1_AG/Programs_Policy/UploadedFile/USFK/USFK_Reg_190-2_Off-Limits_Areas_and_Establishments.pdf

Document may be obtained from:

http://www.usfk.mil/usfk/Uploads/140/USFK%20CPL12.pdf

Applies to Performance in/at: Republic of Korea

52.236-27 SITE VISIT (CONSTRUCTION) (FEB 1995) – ALTERNATE I (FEB 1995)

(a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions Affecting the Work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed.

(b) An organized site visit has been scheduled for-- [Insert date and time]

(c) Participants will meet at-- [Insert location]

* Upon completion of internal review, a site visit schedule will be setup.

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://acquisition.gov/far/index.html http://www.acq.osd.mil/dpap/dars/dfars/

52.252-2 CLAUSES…