A02_Drawing_files___107389___ARCH.pdf

A-1

MANUFACTURES INDICATED.

PURPOSES ONLY. AND NOT INTENDED TO LIMIT SELECTIONS TO PRODUCTS OF THE

COLORS AND PATTERNS LISTED BY MANUFACTURES ARE FOR BIDDING IDENTIFICATION 1.

ADJACENT AREAS AS DIRECTED BY THE CONTRACTING OFFICER REPRESENTATIVE (COR).

CAUSED BY THIS PROJECT AND SHALL REPAIR THE DAMAGES TO MATCH UP TO

CONTRACTOR SHALL BE RESPONSIBLE FOR ALL DAMAGES MADE TO EXISTING AREAS

FOR APPROVAL.

CONTRACTOR ACCORDING TO ACTUAL FIELD CONDITION AND SUBMITED TO COR

CONDITION. IN THAT CASE, SHOP DRAWINGS SHALL BE PREPARED AT THE SITE BY THE

SOME DETAILS SHOWN ON CONTRACT DRAWINGS MAY NOT COINCIDE WITH THE FIELD

8.

FOR APPROVAL.

CONTRACTOR SHALL SUBMIT MANUFACTURER'S INSTALLATION SHOP DRAWINGS TO COR

OFFICE, DPW. PER DIRECTION FROM THE INSPECTOR IN CHARGE OR COR

SALVAGE OR SERVICEABLE MATERIALS SHALL BE RETURNED TO SUPPLY OR STORAGE

2.

3.

4.

5.

6.

7.

CONTRACTOR SHALL NOTIFY THE CONTRACTING OFFICER

IF THERE ARE ANY CONFLICTS WITHIN THE CONTRACT DOCUMENT. THE GENERAL

AND DIMENSIONS PRIOR TO COMMENCING ANY CONSTRUCTION OR RENOVATION.

THE CONTRACTOR SHALL BE RESPONSIBLE IN VERIFYING ALL EXISTING CONDITION

OF THE LOAD BEARING WALLS TO PREVENT COLLAPSE OF THE STRUCTURE

APPROPRIATE TEMPORARY SUPPORTS SHOULD BE CONSTRUCTED PRIOR TO DEMOLITION

9.

10.

11.

12.

13.

14.

NUMBERS ARE FROM TM-5-807-7 AND FEDERAL STANDARD NO. 595b, COLORS.

COLOR OF MATERIALS & PAINTS SHALL BE SELECTED BY USING AGENCY AND COLOR

DETAILS AND GET APPROVAL FROM COR. BEFORE FABRICATION AND INSTALLATION.

CONTRACTOR SHALL PREPARE SHOP DRAWINGS FOR ALL DOOR/WINDOW

WALL : 2.00 SM. DEG K/W

ROOF : 5.64 SM. DEG K/W

R-VALUE :

ADDITIONAL COST TO THE GOVERNMENT.

EQUIPMENT, ETC), ELECTRICAL, TELEPHONE AND FIRE ALARM SYSTEM WITHOUT

THE INSTALLATION AND/OR REPLACEMENT OF MECHANICAL (PLUMBING, HEATING,

ITEMS, CUT, PATCH AND RESTORE WALLS, FLOORS AND CEILING WHERE REQUIRED FOR

THE CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVE/REINSTALL ANY OBSTRUCTED

GENERAL NOTES

SPECIFICATION 15181.

ITEMS REQUIRING MAINTENANCE/OPERATION IAW THE SECTION 3.1.14, OMA STD

PROVIDE ACCESS DOORS FOR ALL CONCEALED VALVES, VENTS, CONTROLS AND OTHER

23,700

5,6756,1756,1755,675

,7

,3

,0

,3

,7

3,000 3,000

1502,7872,7372,9756,4002,9752,7372,787150

11,85011,850

BEDROOM

BEDROOM

ROOM

MECH

23,700

5,6756,1756,1755,675

,7

,3

,0

,7

,3

11,85011,850

3,050

,3

,2

,3

,4

BEDROOM

BEDROOM

W1

D2 D2

W1 W1 W1

W1

W1

W1

W1

W1

W1W1

W1

D2

W1 W1 W1 W1

D2

D1

D1

,2

,3

,9

EXST CMU WALL

PAINT ON

EXST CMU WALL

PAINT ON

(TYP)

CANOPY ABOVE

D3

L2

& INSULATION

W/METAL STUDS

REPLACE GWB

& INSULATION

W/METAL STUDS

REPLACE GWB

D1

EWC

EWC

107389

BLDG NO. 257

REPAIR TRANSIENT LIVING QUARTER,

WARRIOR BASEYI, SC

ARCHITECTURAL

A

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

L1L3 L3

L3L3

SCALE: 1/100

1ST FLOOR PLAN

SCALE: 1/100

2ND FLOOR PLAN

A-3

A-3

A-3

A-3

A-2

A-2

A-2 A-2

A-2

A-2

A-2

A-2

NOTE:

BY MFR

OR AHR BOLT

TOGGLE BOLT

BRACKET

ISOMETRIC

OR APPROVED EQUAL

BRKT MODEL: B-2 (SHOWN)

OR APPROVED EQUAL

FIRE EXTINGUISHERS

MFR: LARSEN'S

SCALE: N/A

FE BRACKET DETAIL

FEB

FEB FEB

FEB

AND GENERAL NOTES

FLOOR PLANS, FEB DETAIL

(TYP)

BLOCK UP

(TYP)

BLOCK UP

THE CONTRACT DOCUMENT OF THIS PROJECT.

STANDARD DETAIL DRAWINGS FOR O&MA PROJECT, KOREA, SHALL BE AS A PART OF

(NIC)

EXTINGUISHER,

FIRE

A-2

A

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

V A

R ,0

,3

V A

R ,0

,3

V A

R ,0

,3

V A

R ,0

,3

W/METAL DOOR FRAME (TYP)

INSULATED METAL DOOR

PAINT ON EXST EXTERIOR WALLS

ON EXST PROTECTED

METAL ROOF (TYP)

ACRYLIC WATERPROOFING

ON EXST PROTECTED

METAL ROOF (TYP)

ACRYLIC WATERPROOFING

BLDG NO. 257

REPAIR TRANSIENT LIVING QUARTER,

WARRIOR BASEYI, SC

ARCHITECTURAL

107389

W/METAL DOOR FRAME (TYP)

INSULATED BLAST METAL DOOR

THERMAL BREAK TYPE (TYP)

BLAST AL. WINDOW,

SCALE: 1/100

FRONT ELEVATION

SCALE: 1/100

RIGHT SIDE ELEVATION

SCALE: 1/100

SCALE: 1/100

LEFT SIDE ELEVATIONREAR ELEVATION

W/METAL DOOR FRAME (TYP)

INSULATED BLAST METAL DOOR

INCL. HANDRAILS (TYP)

PAINT EXTERIOR STAIRS

INCL. HANDRAILS (TYP)

PAINT EXTERIOR STAIRS

PAINT ON EXST EXTERIOR WALLS

PAINT ON EXST EXTERIOR WALLS

SPLASH BLOCK (TYP)

REPLACE CONC

REPAIR RAIN GUTTER (TYP)

REPAIR DOWNSPOUT (TYP)

REPAIR RAIN GUTTER (TYP)

REPAIR DOWNSPOUT (TYP)

SPLASH BLOCK (TYP)

REPLACE CONC

SPLASH BLOCK (TYP)

REPLACE CONC

PAINT ON EXST EXTERIOR WALLS

ON EXST PROTECTED

METAL ROOF (TYP)

ACRYLIC WATERPROOFING

ELEVATIONS

S-256

S-256

,3

,3

A-3

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

REPAIR / MAINTENANCE (K) WORKS

1.

2.

3.

4.

6.

7.

8.

9.

5.

10.

V A

R ,0

V A

R I E

S

ROOM

MECH

BEDROOM

BEDROOM

BEDROOM

BEDROOM

V A

R ,0

,3

ROOM

MECH

BEDROOM

BEDROOM

TO THE INTERIOR (TYP)

& STL COL EXPOSED

PAINT ON EXST WALL

CEILING (TYP)

STL MEMBERS ON THE

EXPOSED CEILING &

PAINT ON EXST ALL

ON EXST FLOOR (TYP)

DAY-CHEM URETHANE

WITH STEEL FRAME (TYP)

HOLLOW CORE DOOR

DOUBLE-ACTING STEEL

CEILING (TYP)

STL MEMBERS ON THE

EXPOSED CEILING &

PAINT ON EXST ALL

PAINT ON EXST CMU WALL (TYP)

11.

12.

FLOOR PLANS, ELEVATIONS AND DETAIL DRAWINGS.

REPLACE DETERIORATED EXISTING BUILDING IDENTIFICATIONS WITH NEW AS SHOWN ON

ON EXST FLOOR (TYP)

DAY-CHEM URETHANE

HARDWARE SETS AS SHOWN ON FLOOR PLANS AND DOOR SCHEDULE.

REPLACE DETERIORATED EXISTING DOORS AND DOOR FRAMES WITH NEW INCLUDING NEW

CEILING (TYP)

STL MEMBERS ON THE

EXPOSED CEILING &

PAINT ON EXST ALL

13.

14.

TO THE INTERIOR (TYP)

& STL COL EXPOSED

PAINT ON ALL WALL

INSULATIONS (TYP)

METAL STUDS &

REPLACE GWB INCL.

INSULATIONS (TYP)

METAL STUDS &

REPLACE GWB INCL.

& INSULATION

W/METAL STUDS

REPLACE GWB

MINOR DAMAGES OF ROOF PRIOR TO FINISH WORK.

SURFACES AS PER MANUFACTURE'S RECOMMENDATION & SPECIFICATION INCLUDING REPAIR

APPLY ACRYLIC FLUID APPLIED WATERPROOFING ROOF COATING ON EXISTING ROOF FOR ALL

BLDG NO. 257

REPAIR TRANSIENT LIVING QUARTER,

WARRIOR BASEYI, SC

ARCHITECTURAL

107389

ON EXST PROTECTED

METAL ROOF (TYP)

ACRYLIC WATERPROOFING

PAINT ON EXST EXTERIOR WALLS

GRILLE, MECH DWG

900X600 TRANSFER

SCALE:

GENERAL SECTION-1

1/50

SCALE:

GENERAL SECTION-2

1/50

SCOPE OF WORKS

WITH NEW AS SHOWN ON FLOOR PLANS, ELEVATIONS AND DETAIL DRAWINGS.

REPAIR DETERIORATED RAIN GUTTERS & DOWNSPOUTS AND REPLACE CONC SPLASH BLOCK

W/CMU

GRILLE OPENING

BLOCK UP

DETAIL DRAWINGS.

REPLACE FIRE EXTINGUISHER BRACKET WITH NEW AS SHOWN ON FLOOR PLANS AND

LOW SPOTS, HIGH SPOTS, PAINTING, AND UNEVEN SURFACE SHALL HAVE BEEN CORRECTED.

BE SMOOTH, TRUE, LEVEL PLANE WITH ALL DEFECTS SUCH AS ROUGH OR SCALING CONCRETE,

ON FLOOR PLANS & INTERIOR FINISH SCHEDULE. THE EXISTING CONCRETE FLOORING SHALL

APPLY URETHANE COATING INCLUDING PRIMER ON EXISTING CONCRETE FLOOR AS SHOWN

FINISH SCHEDULE.

PAINT ALL INTERIOR SURFACES INCLUDING EXPOSED STRUCTURE AS SHOWN ON INTERIOR

TYPE.

REPLACE DETERIORATED EXISTING WINDOW ROLL UP SCREEN BLINDS WITH NEWS, FIREPROOF

BLOCK UP GRILLE OPENING WITH CMU AS SHOWN ON FLOOR PLANS AND SECTIONS.

WINDOW SCHEDULE.

INSULATED GLASS AND PROTECTED METAL FLASHING AS SHOWN ON FLOOR PLANS AND

BLAST THERMAL BREAKER TYPE WINDOWS INCLUDING 26.75THK LOW-e / LAMINATED /

REPLACE DETERIORATED EXISTING WINDOWS INCL INSECT SCREEN WITH NEW ALUMINUM

DOWNSPOUTS AND METAL FLASHINGS AS SHOWN ON FLOOR PLANS AND ELEVATIONS.

PAINT ON EXTERIOR WALL INCLUDING EXTERIOR STAIRS WITH HANDRAILS, RAIN GUTTER,

AS SHOWN ON FLOOR PLANS.

REPLACE DETERIORATED EXISTING NON SLIP NOSINGS OF EXTERIOR STAIRS WITH NEW

INCLUDING PROTECTED METAL FLASHING WITH NEW.

REPLACE DETERIORATED ALL EXISTING INTERIOR AND EXTERIOR LOUVERS AND GRILLES

AND SCOPE OF WORKS

GENERAL SECTIONS

AS SHOWN ON FLOOR PLANS AND INTERIOR FINISH SCHEDULES.

REPLACE DETERIORATED EXISTING GWB WALL WITH NEW INCL. METAL STUDS & INSULATION

B C D

E F G H

SYMBOL BY

DESIGNED BY

ENERGY MANAGER

SUBMITTED BY

USING AGENCY

APPROVED BY

PROJECT NO. DRAWING NO. REF NO.

SCALE :

ZONE DATE APVD.

UTILITIES

SHEET OF

REVIEWED BY

DESCRIPTION

BLDGS & GROUNDS

CHIEF, ENGR'G DIV

DES

CHK'D

REVISIONS

IMCOM

FIRE & EMERGENCY SVC

SAFETY

ENVIRONMENT

UNIT #15707, APO AP 96258-5707

ENGINEERING DIVISON, DPW, USAG-RED CLOUD

HEADQUARTERS, UNITED STATES ARMY GARRISON, RED CLOUD

US ARMY INSTALLATION MANAGEMENT COMMAND

DEPARTMENT OF THE ARMY

A-4

ROOM NAMESROOM NOS

INTERIOR FINISH SCHEDULE

FLOOR BASE WALLS CEILING

REMARKS

FINISH COLOR FINISH COLOR FINISH COLOR FINISH COLOR HEIGHT

PAINT VAR

BEDROOM

MECH ROOM -

MAT'L

EXST

MAT'L

NEW

MAT'L

EXST

MAT'L

NEW

MAT'L

EXST

MAT'L

NEW

MAT'L

NEW

MAT'L

EXST

PAINT PT-1

(2 EA)

P L A N

DOOR

S E C T I O N

STEEL TUBE

WELDED TO

STEEL PLATE

50 x 50 x 6THK

EYEBOLT

HOOK &

DOOR

HOOK & EYEBOLT

STEEL TUBE

CONC)

GALV STEEL

80x80x3.2 THK

80x80x3.2 THK

WALL TYPE BUMPER L02101

GALV STEEL TUBE

(FILLED W/CONC)

PLATE WELDED TO

WALL TYPE BUMPER L02101

YELLOW STRIPS

BLACK BACKGROUND

TUBE (FILLED W/

1 DOOR STOP & HOLDER DETAILS

REMARKS

DOOR DIMENSION

WIDTH

MATERIAL

D1 A

DOOR

TYPE

DOOR

NOS.

ROUGH OPENING

WIDTH HEIGHT

HDW

SET

THICKHEIGHT NO (HR)

RATED

FIRE

LOUVERGLAZING

CUT

UNDER

FRAME

D2 B

STEEL STEEL

- - 1

DOOR

2133STEEL STEEL 1300 2200 1200 44.5 - -2

15001200ALGLASSD - -------

HDW-1

DOOR STOPS L02141

HARDWARE SCHEDULE AND DETAIL

DOOR/WINDOW SCHEDULE

DOOR/WINDOW ELEVATIONS

FINISH SCHEDULE NOTES :

SURFACE

ROOFING

FLASHING

FASCIA

SOFFIT

DOOR & FRAME

HANDRAIL

MATERIAL

STEEL

STEEL PIPE

COLOR

CHOCOLATE

COLOR NO.

20095

CHOCOLATE

CHOCOLATE

CHOCOLATE

CHOCOLATE

CHOCOLATE

20095

20095

20095

20095

20095

REMARKS

WALL

PROTECTED METAL

PROTECTED METAL

PROTECTED METAL

EXTERIOR COLOR SCHEDULE-1

FS 595B

FS 595B

FS 595B

FS 595B

FS 595B

FS 595B

BEDROOM101

BEDROOM

202 BEDROOM

MATERIAL & COLOR SCHEDULE

2.

1.

FOR SUBMITTAL REQUIREMENTS AND SPECIFIC ITEMS TO BE PAINTED.

SCHEDULE. SEE SPECIFICATION SECTION 09915 : EXTERIOR AND INTERIOR COLOR SCHEDULE

COLOR DESIGNATION SHALL BE AS INDICATED IN THE EXTERIOR AND INTERIOR FINISH COLOR

WITH THE CAMP CASEY EXTERIOR COLOR SCHEME AS APPROVED BY THE COR.

SELECTION OF EXTERIOR PAINT AND FACTORY APPLIED COLORS SHALL BE IN ACCORDANCE

UT-1

/VCB

STL ANGLE

/VCB

STL ANGLE

/VCB

STL ANGLE

/VCB

STL ANGLE

-/VCB

-/VCB

-/VCB

-/VCB

PAINT/F.F.

VCB-1

PT-2/

PAINT/F.F.

VCB-1

PT-2/

PAINT/F.F.

VCB-1

PT-2/

PAINT/F.F.

VCB-1

PT-2/

GWB/CMU

METAL/

PT-1

- - -CMU

GWB/CMU

METAL/

PAINT PT-1

PAINT PT-1

GWB/CMU

METAL/

PAINT PT-1

/GWB

METAL

EXP STL -

VARPAINT PT-1EXP STL -

VAR-

VARPAINT PT-1EXP STL -

VARPAINT PT-1EXP STL -

MANUFACTURERS STANDARD MUST APPROACH.

COLOR IS NOT REQUIRED. THE SELECTIONS SERVE ONLY TO INDICATE THE COLOR WHICH THE

INTENDED TO LIMIT SELECTIONS OF PRODUCTS. AN EXACT MATCH OF THE MANUFACTURERS

MANUFACTURERS' COLORS LISTED ARE FOR IDENTIFICATION PURPOSES ONLY AND ARE NOT

PROTECTED METAL CHOCOLATE 20095 FS 595B

CHOCOLATE 20095 FS 595BSTAIRS STEEL

CHOCOLATE 20095 FS 595B

3.

4.

WINDOW ALUMINUM

PROTECTED METAL

21331300 2200 1200 44.5

SPRING HINGE K81151

KICK PLATES J102

HDW-2

HINGES A5111 (NRP)

DOOR CLOSER C02021

THRESHOLD J13100

KICK PLATES J102

1 DOOR STOP & HOLDER

WEATHERSTRIP1

250X250 & HARDWARE SCHEDULE

INTERIOR FINISH, DOOR/WINDOW

EXIT DEVICE TYPE3 F08, LEVER

D3 C - -2133STEEL STEEL 1800 2200 1728 44.5 -3 --

550850ALE - -------

WINDOW

LOUVER

AL

HDW-3

HINGES A5111 (NRP)

LOCKSET, F-07

FLUSH BOLTS, L04081

ASTRAGAL

1 THRESHOLD, J13100

-/GWB/-

-/GWB/-

-/GWB/-

-/GWB/-

PUSH PLATES

3.

COORDINATING WITH THE USER FOR APPROVAL BY COR.

THE CONTRACTOR SHALL SUBMIT MASTER KEYING CHART,

APPROVAL

AND WINDOW SCHEDULE AND DETAIL DRAWING TO COR FOR

CONTRACTOR SHOULD SUBMIT SHOP DRAWING FOR ALL DOOR

CONNECTED TO STRUCTURE WITH ANCHOR BOLT AND WELDING.

ALL EXTERIOR DOOR FRAME AND WINDOW FRAME SHOULD BE

AND UFC 4-010-01, PAG B-9 & 10, PARA B-3.1 THRU B-3.1.4

ALL EXTERIOR DOOR, GLAZED WINDOW: SEE SEPC SECTION 08391; 4.

6.

HEAT GAIN AND FIRERATED.

WHITE OR LIGHT BEIGE TO MAXIMIZE REFLECTANCE AND MINIMIZE

BE EQUIPPED WITH HORIZONTAL MINI BLINDS. COLOR SHALL BE

WINDOWS IN ALL AREAS WHERE FUNCTIONALLY WARRANTED SHALL

1.

2.

FABRICATION AND INSTALLATION

SHALL BE APPROVED BY THE CONTRACTING OFFICER BEFORE

DOORS AND ALUMINUM WINDOWS AS ACTUAL SIZE, AND DRAWINGS

THE CONTRACTOR SHALL PREPARE SHOP DRAWINGS FOR ALL

DOOR & WINDOW NOTES

WINDOW BLIND SHOULD BE EQUIPPED TO ALL EXTERIOR WINDOWS.

( SHGC : MAX 0.4 )

+ 6 THK TINTED LOW-E TEMPERED GLASS

+ 12 THK AIR SPACE

: 8.75 THK CLEAR LAMINATED GLASS

TYPICAL INSULATED/LAMINATED GLASS FOR WINDOWS

(ANODIZED DARK BRONZE)

AL BLAST WINDOW

(THERMAL BREAK TYPE)

W/ INSECT SCREEN

- PEAK REFLECTED PRESSURE

: 40.6 KPA

- PEAK IMPULSE

: 210 KPA-MS

D

STL DOOR

THERMAL INSULATED

C

SCHEDULED

LOUVER AS

(TYP)

W/ BIRD SCREEN

E

& INSECT SCREEN

300X400

2EA OF

BLDG NO. 257

REPAIR TRANSIENT LIVING QUARTER,

WARRIOR BASEYI, SC

ARCHITECTURAL

107389

B

CORE DOOR

A

VISION

LIGHT

100150

THERMAL INSULATED

W/ METAL FRAME

- PEAK REFLECTED PRESSURE

: 40.6 KPA

- PEAK IMPULSE

: 210 KPA-MS

W/ METAL FRAME W/ METAL FRAME

5.

100X600 10T TEMPERED GLASS

USER AGENCY.

SELECTION OF INTERIOR PAINT AND FACTORY APPLIED COLORS SHALL BE APPROVED BY

URETHANE

URETHANE

URETHANE

URETHANE

URETHANE

URETHANE

URETHANE

URETHANE

COATING

COATING

COATING

COATING

UT-1

UT-1

UT-1

REPAIR

EXST

STOOP

EXST CONC

EXST

50x50x6 THK STEEL

FLOOR MATERIAL/COLOR

UT-1

BASE MATERIAL/COLOR

OR APPROVED EQUAL

P110, BROWN

ROPPE

VINYL COVE BASEVCB-1

WALL MATERIAL/COLOR

PT-1

OR APPROVED EQUAL

LATEX/SEMIGLOSS

NOROO NR7066

PAINT COLOR

CEILING MATERIAL/COLOR

APPROVED EQUAL

CLEAR FINISH OR

URETHANE (J38)

SUPERIOR DAY-CHEM

DAYTON

URETHANE COATING

PT-2

OR APPROVED EQUAL

LATEX/SEMIGLOSS

NOROO NR9058

PAINT COLOR

PT-1

OR APPROVED EQUAL

LATEX/SEMIGLOSS

NOROO NR7066

PAINT COLOR

TILT AND TURN AL LOUVER OR GRILLE

8501100ALE - -------AL

600800ALE - -------AL

ROLL UP SCREEN BLINDW1

L1

L2

L3

STL HOLLOW

STL BLAST DOOR