Switchboard QAs.xlsx

XLSX spreadsheet 11 KB Posted

Attached to
Switchboard and MCC Panel Replacement
Solicitation number
W91QF526QA004
Issued by

About this file

This file is a Questions and Answers (Q&As) document incorporated into Solicitation Amendment 01 for the Switchboard and MCC Panel Replacement contract (W91QF526QA004). The Q&A document addresses technical clarification requests submitted by potential contractors but provides no substantive responses, listing "Information not available" for all inquiries. The questions sought critical technical specifications including drawings, schematics, existing MCC and bucket manufacturer information, fuse ratings, wiring diagrams with part numbers, feeder routing requirements, and documentation such as one-line electrical diagrams, electrical elevations, electrical schematics, and photographs of existing equipment.

This solicitation, issued by the Department of the Army Materiel Command Mission and Installation Contracting Command Fort Eustis, requires contractors to provide switchboard and MCC panel replacement services with installation capabilities for Radford Army Ammunition Plant in Radford, Virginia. A mandatory site visit was conducted on July 14, 2026, at 9:00 a.m. EST at Building 450, with a proposal submission deadline of July 31, 2026, at 12:00 p.m. EDT. The SOW was revised in Amendment 01 with adjustments to paragraphs 2.0, 3.1.2, and removal of paragraph 3.1.4. Contractors were required to register for the site visit by July 13, 2026, at 12:00 p.m. EST and could submit questions through July 24, 2026, at 12:00 p.m. EST.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Sheet1

QuestionGovernment Response
Are there any drawings, schematics, or other technical documents available for this project beyond the bullet-point scope provided?Information not available
What are the sizes and manufacturers of the existing MCCs and buckets to be replaced? Is there a required manufacturer for the replacement equipment?Information not available
Can you provide the fuse ratings for the bucket-powered equipment? Additionally, how many sections are required for each MCC (MCC-1 and MCC-2)?Information not available
Is a wiring diagram, including specific part numbers for all controllers, available to support the construction of the new MCCs, or are the control boards supplied by a third-party manufacturer?Information not available
Will the new cabinets and buckets be connected to any existing system components that will remain in service outside of the machinery?Information not available
Will any feeders supplying the new equipment need to be rerouted, extended, or upgraded?Information not available
To help us prepare an accurate and complete proposal, would you please provide the following documentation, if available:
Information not available
One-line electrical diagramsInformation not available
Electrical elevationsInformation not available
Electrical schematicsInformation not available
Photographs of the existing MCCs, switchboards, and associated equipmentInformation not available

File details come from the government source that posted it. Updated .