Attachments 26QA164_Additional Amendment 0002.pdf

This document is a set of architectural and engineering drawings for a military facility prepared by the Corps of Engineers.

The drawings depict detailed plans for a heating room facility with floor elevation at 777.00. The plan view shows a circular or curved layout with multiple mechanical systems and components including: a diesel fuel storage tank with associated piping, a heater and engine fuel storage tank, a heating system with fuel supply (approximately 600 CFM at 1140 RPM, 3/8 HP), a covered boiler, floor sump with elevation details, and hydraulic piping to service gates. Additional specifications include a 20 x 12 duct, a 2-fill and vent configuration, and detailed measurements for gate valves, drain valves, and emergency gates. The elevation view shows cross-sectional details of the fuel storage tanks with nominal dimensions of 3.5 to 4 feet diameter and capacity notations, spring-loaded relief valves, and concrete pad placement. The heating room section indicates a scale of 3/8" = 1'-0" and includes interconnected mechanical systems for fuel delivery and temperature regulation. Technical annotations throughout specify pipe diameters, valve types, and operational parameters for the heating equipment and fuel delivery systems.