W912QR20Q0038 0003.pdf

CIVIL/OPS/ENVIRONMENTAL BR

ATTN: JESSICA MCCALL

600 DR M L KING JR PL RM 821

LOUISVILLE KY 40202-2236

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

a. In order to provide more clarif ication on the project specif ications, the required depth of the vertical drill hole is being amended from 10 inches in diameter to 3 1/2 inches in diameter.

b. Additional specif ications for the miter gate cross walk, along with drilling locations have been included in this amendment.

c. Additional drawings have also been included to match this specif ication.

d. The due date has been extended from 13 April 2020 to 24 April 2020 as a result of this amendment.

e. Updated Wage Rates have been added.

f. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

1 68

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912QR20Q0038

X 9B. DATED (SEE ITEM 11)

13-Mar-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

As a result of Amendment 0003, Solicitation W912QR20Q0038 for Floating Mooring Bit Concrete Core Drilling at JT Myers Lock and Dam in Mt. Vernon, Indiana is hereby amended as follows:

10A. MOD. OF CONTRACT/ORDER NO.

U0003

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

10-Apr-2020

CODE

U. S. ARMY ENGINEER DISTRICT, LOUISVILLE

600 DR. MARTIN LUTHER KING, JR. PLACE

ROOM 821

LOUISVILLE KY 40202-2239

W912QR 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE 964860

FACILITY CODECODE

EMAIL:TEL:

W912QR20Q0038

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION 00 10 00 - SOLICITATION

The required response date/time has changed from 13-Apr-2020 10:00 AM to 24-Apr-2020 10:00 AM.

The following have been modified:

SPECIAL INSTRUCTIONS

Amendment 0001 highlighted in yellow Amendment 0003 highlighted in blue

This Request for Quote (RFQ) is for Floating Mooring Bitt Concrete Core Drilling at JT Meyers Locks and Dam in Mt Vernon, Indiana.

The contractor shall core drill four (4) vertical (3 ½ in diameter) holes at eight (8) different floating mooring bitts per design drawings attached to this contract. Core drilling will be as per the drawings from elevation 362.00 to

305.00. All work shall be completed in accordance with the attached Scope of Work and Drawings.

Work will begin within 10 calendar days of the Notice to Proceed (NTP) and will conclude 80 calendar days after

NTP.

Location:

JT Myers Locks and Dam 16501 Raben Road Mt Vernon, IN 47620

This procurement is 100% set-aside for Small Business, 238990-All Other Specialty Trade Contractors. Size Standard: $16,500,000.00.

Method of Payment under this contract will be Electronic Funds Transfer (EFT) to a commercial bank account specified by the Contractor.

Note: The contract award will be based on the lowest price to the Government with one firm fixed-price award from this RFQ. In addition to the completed price breakout schedule quote, the Offeror must complete and submit the Representations and Certifications located within the solicitation.

Quotes are due 24 April 2020, 10:00AM Eastern Time. Fax quotes will not be accepted. Electronic submittals will be accepted and may be emailed to jessica.l.mccall@usace.army.mil.

UNSCHEDULED SITE VISIT: All potential offerors who would like to arrange a site visit may contact Dallas Jackson, Lockmaster, or Patrick Buttry at (812) 838-5836. They can be reached Monday through Friday between 0700 nd 1700 Central Time. Offerors are encouraged to bring only the minimum number of necessary individuals to the site visit and the number of attendees must be provided to the Lockmaster prior to arriving at the site.

NOTE: All POC’s listed in the SOW shall NOT be contacted until after award.

At no time should the Contractor perform additional work outside the scope of this contract without the prior authorization of the Contracting Officer, and no work shall be performed that will cause the Contractor to exceed the Contract Price. Work performed without a binding contract document authorizing such work shall result in the Contractor not being paid for that work performed. During the course of the Contract, any additional work mailto:jessica.l.mccall@usace.army.mil determined to be needed may be requested by Contracting Officer for a Contract Modification. Each interested Contractor should examine the contract drawings, perform pre-bid and assume the responsibility for quantities, materials, critical dimensions, and work conditions used in order to calculate a proposal.

All contractors must be registered in the System for Award Management (www.SAM.gov) prior to award of a contract. All proposed contractors are highly encouraged to review FAR Clause 52.232-33 Payments by Electronic Funds Transfer – System for Award Management, which indicates “All payments by the Government under this contract shall be made by electronic funds transfer (EFT).” Those not currently registered can obtain registration by going to the website http://www.SAM.gov. The process can usually be completed from 24 to 48 hours after submission. Contractors will need to obtain a Unique Entity Identifier (formerly DUNS number) for processing their registration. If you do not already have a Unique Entity Identifier, one can be obtained from http://www.SAM.gov.

Refer to www.SAM.gov for information formerly found in CCR, EPLS, ORCA and FedReg. Please begin the registration process immediately in order to avoid delay of the contract award should your firm be selected.

ALERT: You must submit a notarized letter appointing the authorized Entity Administrator before your registration will be activated. This requirement now applies to both new and existing entities. Effective 29 April 2018, the notarized letter process is now mandatory on all CURRENT registrants at SAM who have a requirement to update data on their SAM record. The notarized letter is mandatory and is required before the GSA Federal Service Desk (FSD) will activate the entity's registration.

Effective 29 June 2018, vendors creating or updating their registration can have their registration activated prior to the approval of the required notarized letter. However, the signed copy of the notarized letter must be sent to the GSA Federal Service Desk (FSD) within 30 days of activation or the vendor risks no longer being active in SAM.

Vendors can check whether an account is active by performing a query by their CAGE or Unique Entity Identifier (formally known as DUNS). The new registration process may now take several weeks, so vendors are highly encouraged to begin registering as soon as possible to avoid any possible delays in future contract awards.

Remember, there is no cost to use SAM.

To find out additional information about the changes of the SAM registration process, contractors should visit the Frequently Asked Questions (FAQ) link located at the top of the SAM homepage (www.sam.gov).

http://www.sam.gov/

SECTION 00 20 00 - INSTRUCTIONS FOR PROCUREMENT

The following have been modified:

SCOPE OF WORK

Ohio River

JT Myers Locks & Dam Floating Mooring Bitt Concrete Core Drilling

Amendment 0001 highlighted in yellow 03/17/2020 Amendment 0002 highlighted in green 03/18/2020 Amendment 0003 highlighted in blue 04/10/2020

1. GENERAL

I. Scope of Work: This contract will be to core drill four (4) vertical (3 ½ in diameter) holes at eight

(8) different floating mooring bitts per design drawings attached to this contract. Core drilling will be as per the drawings from elevation 362.00 to 3305.00. Stations can be referenced on the attached drawing ON-200.1/5.

II. Completion Dates: All core drilling will be completed within 80 calendar days after NTP.

III. Corps of Engineers Inspection: Corps of Engineers personnel shall be allowed to inspect the progress of any portion of this project.

IV. Technical Point of Contact (TPOC): All technical questions regarding this contract shall be directed to Chris Magee by telephone: (502) 315-6684, or email: Christopher.R.Magee@usace.army.mil.

V. Days and Hours of Work: All work will be done during the hours of 0700-1700 Central Time. Work on weekends or federal holidays will be determined by Lock Master.

VI. Work Site Address: The contractor will be working at JT Myers Locks and Dam.

JT Myers Locks and Dam 16501 Raben Road

Mt Vernon, IN 47620

VII. Project Point Of Contact:

Lockmaster: Dallas Jackson

JT Myers Locks and Dam 16501 Raben Road

Mt Vernon, IN 47620 Phone number: (812) 838-5836

E-mail: Dallas.W.Jackson@usace.army.mil

2. RESPONSIBILITIES AND SITE CONDITIONS

I. Contractor shall be fully responsible for the purchase/rental, delivery, and placement of necessary equipment to complete the job without assistance from the lock staff.

II. Contractor shall verify core drill locations with Lock Master and Technical Representative prior to starting.

mailto:Dallas.W.Jackson@usace.army.mil

III. Any requests for use of lock equipment must be directed to and approved by the Technical Representative.

IV. Fueling of equipment will follow all local, state and federal Spill Prevention and Countermeasure (SPCC) regulations. Fuel shall not be provided by the Government.

V. Existing break areas, offices, latrines, and showers are not available for the contractor's use. It is recommended that the contractor bring portable restrooms and a break room.

VI. Parking of vehicles is to be coordinated with the Lock Master before the first day of drilling.

VII. All deliveries will be coordinated with the Lockmaster at least 48 hours in advance.

VIII. The contractor is also responsible for the timely and proper disposal of all waste and removed materials related to their repairs from the facility each day.

3. DRAWINGS

*****The construction process shall conform to the attached drawings, which forms a part of these specifications. *****

Sheet Title and Description G-000 G-100 G-101

Cover sheet General notes and index Photos and typical guide section key

S-100 Existing guide recess core drilling plan

OU-200.1/1 Monolith layout OU-200.1/3 Gallery Layout OU-200.1/5 Wall Armor and Appurtenances (SHEET 1) OL-200.1/16 Monoliths R-34 thru R-36

OL-200.1/17

OL-200.1/19

OL-200.1/20

OL-200.1/22

Monoliths R-37 thru R-40 Monoliths R-45 thru R-48 Monoliths R-49 thru R-53 Monoliths R-58 thru R-61

OL-200.1/23 Monoliths R-62 thru R-66 OL-200.1/140 Miscellaneous Metals Floating Mooring Bitt General Arrangement And

Details OU-230.1/14 Miter Gates Walkway Framing OU-230.1/15 Miter Gates Walkway Grating and Handrailing

A. General conditions

1. Contract will consist of core drilling as shown on s-100 (in preparation of government performed wire concrete cutting)

2. All dimensions and elevations shown on the structural drawings shall be verified by the contractor. All changes or variances shall be approved by the government.

3. Governing codes:

a. Concrete sawing and drilling association (csda-c-101, latest addition)

b. EM 385-1-1, safety and health requirements manual

4. Contractor is responsible to visually field verify the existing conditions prior to the start of any work affecting the drilling operations. Contractor is to report any changes or discrepancies from those shown by the government.

5. The area of drilling shall not exceed the extents shown on the contract drawings.

6. The miter gate cross walks, located at the upper and lower ends of the lock chamber, load bearing capacity is 6,900 lbs (supports a light duty fork truck).

7. The concrete monolith area load bearing capacity is negligible.

8. The width of the miter gate cross walks is 5 feet, 1 inches, from rail to rail. See drawings OU 230.1/14 and

OU 230.1/15.

9. Drilling Locations

a. Table showing drilling locations and stations Drawing Number

(OU)

Station Monolith Max Width on top of monolith

(ft) 200.1/16 11 + 95 R36 36 200.1/17 11 + 48 R37 36 200.1/17 10 + 20 R40 12 200.1/19 7 + 52 R46 12 200.1/20 4 +80 R53 12 200.1/22 2 + 02 R60 36 200.1/23 0 + 80 R62 36 200.1/23 0 + 30 R63 36

B. Tolerance - horizontal deviation shall not exceed 1/2" per height (56'-1 3/4")

C. The floating mooring bitt recesses are protected by removable safety chains. The contractor is to remove and reattach these safety chains as necessary to perform the contract work. The contractor shall adhere to EM 385 1- 1, "Safety and Health Requirement Manual" in regards to fall protection and securing the area from accidental falls. When not working on site, the contractor is responsible re-installing the safety chains, or erecting a temporary barrier.

4. WORKMANSHIP

I. General: Workmanship shall be of the highest grade in accordance with the best modern practices to conform to the specifications and drawings.

II. Quality Control: The Contractor shall establish and maintain a quality control system to assure compliance with the contract requirement. The Contractor’s Quality Control staff will ensure that workmanship is of the highest quality and provide documentation that supports this quality for all work performed by the Contractor, any Sub-Contractor, Fabricator or Supplier.

5. SUBMITTALS

I. Contractor shall submit quality control plan per 4-II under workmanship.

II. Contractor shall submit a construction execution schedule for verification from Lock Master.

6. PAYMENTS

Payment will be made by Electronic Funds Transfer (EFT), upon acceptance of the completed work and providing final invoice. Invoices shall be mailed to:

JT Myers Locks and Dam Attn: Dallas Jackson, Lockmaster 16501 Raben Road Mt Vernon, IN 47620

7. WAGE RATES

The U.S. Department of Labor (DoL) wage rates apply to this work and are included. The Contractor is required to provide payroll documentation for all work performed under this Contract.

8. TIME EXTENS IONS FOR UNUSUALLY SEVERE WEATHER ER 415-1-15

This provision specifies the procedure for the determination of the time extensions for unusually severe weather in accordance with the contract clause entitled "Default (Fixed Price Construction)" FAR 52.249-10 in section 00 70 00 of the base contract. In order for a time extension, the following conditions must be satisfied:

The weather experienced at the project site during the contract period must be found to be unusually severe. That is, more severe than the adverse weather anticipated for the project location during any given month. If, in the judgment of the Contracting Officer, the findings of fact warrant such action, the time for completing the work shall be extended. The delay must be beyond the control and without the fault or negligence of the contractor.

The following schedule of the monthly anticipated adverse weather delay is based on the national oceanic and atmospheric administration (NOAA) or similar data for the project location and will constitute the base line for monthly weather time evaluations. The contractor's progress schedule must reflect these anticipated adverse weather delays in all-weather dependent activities.

MONTHLY ANTICIPATED ADVERSE WEATHER DELAY WORK DAYS BASED ON (5)

DAY WORK WEEKS

JAN FEB MAR APR MAY JUN JUL

16 12 7 5 4 4 4

Upon acknowledgment of the notice to proceed (NTP) and continuing throughout the contract, the contractor will record on the daily CQC report, the occurrence of adverse weather and resultant impact to normally scheduled work. Actual or more of the contractor's scheduled work day. The number of actual adverse weather delay days must prevent work on critical activities for 50 percent weather delay days shall include days impacted by actual adverse weather (even if adverse weather occurred in previous month), be calculated chronologically from the first to the last day of each month, and be recorded as full days. If the number of actual adverse weather delay days exceeds the number of days anticipated, listed above, the contracting officer will convert any qualifying delays days, and issue a modification in accordance with the contract clause entitled to calendar days, giving full consideration for equivalent fair weather work "payments under fixed price construction contracts".

9. SAFETY

The Contractor shall complete all work in accordance with the most current U.S. Army Corps of Engineers Safety and Health Requirements Manual, EM 385-1-1, in addition to the current provisions of the Occupational Safety and Health Act, and all applicable Federal, State and local laws, codes and regulations. The Contractor shall submit a safety plan in writing prior to any on-site work. The safety plan may be turned in by the time of the pre-work conference.

Personal Protective Equipment (PPE) and Apparel. Protective apparel and equipment, as identified in the AHA, shall be provided to eliminate or minimize safety hazards to personnel. As a minimum, each employee shall wear a sleeved shirt, long trousers, and safety-toe shoes or boots during all contract work. Hard hats, face shields, safety glasses with side shields, or goggles, and hearing protection shall be worn by employees when required by the Safety Manual. Fire extinguisher(s) and first aid kit(s) meeting the Safety Manual standards shall also be provided an easily accessible to all employees.

http://www.publications.usace.army.mil/Portals/76/Publicat ions/EngineerManuals/EM_385-1- 1.pdf

10. SECURITY

All contractor employees, to include subcontractor employees, requiring access to Army installations, facilities, controlled access areas, or require network access, shall complete AT Level I awareness training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. Upon request, the contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the Technical Point of Contact or to the Contracting Officer, within 5 calendar days after completion of training by all employees and subcontractor personnel. AT Level I awareness training is available at the following website: http://jko.jten.mil/courses/atl1/launch.html; or it can be provided by the RA ATO in presentation form which will be documented via memorandum.

All contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes.

Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

The contractor and all associated sub-contractors shall receive a brief/training (provided by the RA) on the local suspicious activity reporting program. This locally developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the project manager, security representative or law enforcement entity. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance with the results reported to the TPOC NLT 5 calendar days after the completion of the training.

All new contractor employees will complete Level I OPSEC Training within 30 calendar days of their reporting for duty. Additionally, all contractor employees must complete annual OPSEC awareness http://www.publications.usace.army.mil/Portals/76/Publications/EngineerManuals/EM_385-1-1.pdf http://www.publications.usace.army.mil/Portals/76/Publications/EngineerManuals/EM_385-1-1.pdf training. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee, to the TPOC or to the contracting officer (if a TPOC is not assigned), within 5 calendar days after completion of training. OPSEC awareness training is available at the following websites: https://www.iad.gov/ioss/ or http://www.cdse.edu/catalog/operations-security.html; or it can be provided by the RA OPSEC Officer in presentation form which will be documented via memorandum.

All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

The Contractor must pre-screen Candidates using the E-verify Program (http://www.uscis.gov/e-verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award

11. ACCIDENT REPORTING

The Contractor shall maintain accurate accident records and report all accidents as prescribed by the TPOC. Accidents shall be reported within twenty-four (24) hours of occurrence (not including weekends and holidays), and all serious accidents (those resulting in death or injury requiring medical attention or lost time) shall be reported immediately.

12. DAMAGE REPORTS

In all instances where Government property, equipment, natural features, landscape, or trees are damaged by contract employees, an immediate notification shall be made to the TPOC. A full report of the incident and extent of such damage shall be submitted to the TPOC within two (2) calendar days of occurrence, excluding weekends and holidays.

13. CONTRACT EMPLOYEES

All contract employees shall conduct themselves in a proper and courteous manner at all times.

Contract employees shall comply with all provisions of Title 36, Chapter III, Part 327, CFR and obey all posted signs and regulations in the performance of work under this contract. Being under the influence of or consuming alcoholic beverages or any controlled substances by the Contractor or employees while on duty is prohibited.

D E

S

IG

N E

D B

Y

D E

S C

R

IP

T

IO

N M

A R

K

S

IZ

E

S U

B M

IT

T E

D B

Y

D A

T E

C H

E C

K E

D B

Y

D R

A W

N B

Y

IS

S

U E D

A T

E

SHEET ID

A

B

C

D

E

F

G

1 98765432

A N

S I

D

O H

IO

R

IV

E R

J .T

M Y

E R

S L

O C

K S A

N D D

A M

F L

O A

T

IN

G M

O O

R

IN

G B

IT

T R

E C

E S

S R

E P

A

IR

S

P

®of Engineers

US Army Corps

L

O U

IS

V

IL

L E

K Y

D

R

M A

R T

IN

L

U T

H E

R K

IN

G J

R P

L A

C E

L O

U

IS

V

IL

L E D

IS

T R

IC

T

U .S

A R

M Y C

O R

P S O

F E

N G

IN

E E

R S

T B

D

C O

N T

R A

C T N

O

CERTIFIED FINAL

S O

L

IC

IT

A T

IO

N N

O

N O

V

LRL_Screen.dscriptLRL_pdf.pltcfg12:51:23 PM 10/24/2019

...\128624_CORE DRILLING_G-000xxx.dgn

S I

G-000

LOUISVILLE DISTRICT

of Engineers

AND APPROVAL OF ALL DRAWINGS IN THIS SET AS INDEXED ON THIS SHEET.

SIGNATURES AFFIXED BELOW INDICATE OFFICAL RECOMMENDATION

Quality Control

Approval Recommended: *

PE/A

Approved: *

THE SCOPE OF THIER EMPLOYMENT. SIGNATURES ARE REQUIRED BY ER 1110-1-8152.

DESIGNATIONS APPEAR ON THESE DOCUMENTS ARE OPERATING WITHIN

LOUISVILLE DISTRICT. INDIVIDUALS WHOSE SIGNATURES AND REGISTRATION

* THIS PROJECT WAS DESIGNED BY THE U.S. ARMY CORPS OF ENGINEERS,

Reviewed by:*

DATE

DATE

DATEENGINEERING DIVISION, CHIEF

John Bock, P.E.

AND APPROVAL OF ALL DRAWINGS IN THIS SET AS INDEXED ON THIS SHEET.

SIGNATURES AFFIXED BELOW INDICATE OFFICAL RECOMMENDATION

Quality Control

Approval Recommended: *

PE/A

Approved: *

THE SCOPE OF THIER EMPLOYMENT. SIGNATURES ARE REQUIRED BY ER 1110-1-8152.

DESIGNATIONS APPEAR ON THESE DOCUMENTS ARE OPERATING WITHIN

LOUISVILLE DISTRICT. INDIVIDUALS WHOSE SIGNATURES AND REGISTRATION

* THIS PROJECT WAS DESIGNED BY THE U.S. ARMY CORPS OF ENGINEERS,

Reviewed by:*

DATE

DATE

DATEENGINEERING DIVISION, CHIEF

John Bock, P.E.

OHIO RIVER

FLOATING MOORING BITT RECESS REPAIRS

P2 128624 FY 21

T

W E

S S

E L

S

G A

L L

A G

H

R

C

V E

R S

H E

J.T. MYERS LOCKS AND DAM

N N

J.T. MYERS

VICINITY MAP

M S

T

IV

E R

S

CORE DRILLING CONTRACT

SOLICITATION NO:

CONTRACT NO: TBD

ISSUE DATE: NOV 2019

S

IG

N E

D B

Y

D E

S C

R

IP

T

IO

N M

A R

K

S

IZ

E

S U

B M

IT

T E

D B

Y

D A

T E

C H

E C

K E

D B

Y

D R

A W

N B

Y

IS

S

U E D

A T

E

SHEET ID

A

B

C

D

E

F

S I

D

O H

IO

R

IV

E R

J .T

M Y

E R

S L

O C

K S A

N D D

A M

F L

O A

T

IN

G M

O O

R

IN

G B

IT

T R

E C

E S

S R

E P

A

IR

S

P

U

IS

V

IL

L E

K Y

D

R

M A

R T

IN

L

U T

H E

R K

IN

G J

R P

L A

C E

L O

U

IS

V

IL

L E D

IS

T R

IC

T

U .S

A R

M Y C

O R

P S O

F E

N G

IN

E E

R S

T B

D

C O

N T

R A

C T N

O

CERTIFIED FINAL

S O

L

IC

IT

A T

IO

N N

O

N O

V

LRL_Screen.dscriptLRL_pdf.pltcfg12:51:26 PM 10/24/2019

...\128624_CORE DRILLING_G-100xxx.dgn

S

G A

L L

A G

H E

G-100

W E

S S

E L

G E

N E

R A

L N

O T

D I

N D

E X

M S

T

IV

E R

S

OFFICER REPRESENTATIVE.

THE SAFETY CHAINS, OR ERECTING A TEMPORARY BARRIER AS APPROVED BY THE CONTRACTING

ACCIDENTAL FALLS. WHEN NOT WORKING ON SITE, THE CONTRACTOR IS RESPONSIBLE RE-INSTALLING

REQUIREMENTS MANUAL" IN REGARDS TO FALL PROTECTION AND SECURING THE AREA FROM

CONTRACT WORK. THE CONTRACTOR SHALL ADHERE TO EM 385-1-1, "SAFETY AND HEALTH

CONTRACTOR IS TO REMOVE AND REATTACH THESE SAFETY CHAINS AS NECESSARY TO PERFORM THE

THE FLOATING MOORING BITT RECESSES ARE PROTECTED BY REMOVABLE SAFETY CHAINS. THE C.

TOLERANCE - HORIZONTAL DEVIATION SHALL NOT EXCEED 1/2" PER HEIGHT (56'-1 3/4")B.

THE AREA OF DRILLING SHALL NOT EXCEED THE EXTENTS SHOWN ON THE CONTRACT DRAWINGS.5.

CHANGES OR DISCREPANCIES FROM THOSE SHOWN BY THE GOVERNMENT.

START OF ANY WORK AFFECTING THE DRILLING OPERATIONS. CONTRACTOR IS TO REPORT ANY

CONTRACTOR IS RESPONSIBLE TO VISUALLY FIELD VERIFY THE EXISTING CONDITIONS PRIOR TO THE 4.

EM 385-1-1, SAFETY AND HEALTH REQUIREMENTS MANUALB.

CONCRETE SAWING AND DRILLING ASSOCIATION (CSDA-C-101, LATEST ADDITION)A.

GOVERNING CODES: 3.

THE CONTRACTOR. ALL CHANGES OR VARIANCES SHALL BE APPROVED BY THE GOVERNMENT.

ALL DIMENSIONS AND ELEVATIONS SHOWN ON THE STRUCTURAL DRAWINGS SHALL BE VERIFIED BY 2.

PERFORMED WIRE CUTTING).

CONTRACT WILL CONSIST OF CORE DRILLING AS SHOWN ON S-100 (IN PREPARATION OF GOVERNMENT 1.

GENERAL CONDITIONSA.

GENERAL NOTES:

= WITHW/

= VERTICALVERT

= TYPICALTYP

= SPACINGSPA

= PLACESPLCS

= PLATEPL

= OPENINGOPNG

= ON CENTEROC

= LONG LEG HORIZONTALLLH

= FLOATING MOORING BITTFMB

= EXISTINGEXIST

= EACH SIDEES

= ELEVATIONELEV

= CLEARCLR

= CORROSIVECORR

= CONTRACTING OFFICER'S REPRESENTATIVECOR

= CONCRETECONC

= CENTERLINECL

ABBREVIATIONS

LOCK WALL

FACE OF EXISTING

/4

/4

D E

S

IG

N E

D B

Y

D E

S C

R

IP

T

IO

N M

A R

K

S

IZ

E

S U

B M

IT

T E

D B

Y

D A

T E

C H

E C

K E

D B

Y

D R

A W

N B

Y

IS

S

U E D

A T

E

SHEET ID

A

B

C

D

E

F

S I

D

O H

IO

R

IV

E R

J .T

M Y

E R

S L

O C

K S A

N D D

A M

F L

O A

T

IN

G M

O O

R

IN

G B

IT

T R

E C

E S

S R

E P

A

IR

S

P

U

IS

V

IL

L E

K Y

D

R

M A

R T

IN

L

U T

H E

R K

IN

G J

R P

L A

C E

L O

U

IS

V

IL

L E D

IS

T R

IC

T

U .S

A R

M Y C

O R

P S O

F E

N G

IN

E E

R S

T B

D

C O

N T

R A

C T N

O

CERTIFIED FINAL

S O

L

IC

IT

A T

IO

N N

O

N O

V

LRL_Screen.dscriptLRL_pdf.pltcfg12:51:29 PM 10/24/2019

...\128624_CORE DRILLING_G-101xxx.dgn

G A

L L

A G

H E

G-101

W E

S S

E L

P H

O T

O S A

N D T

Y P

IC

A L G

U

ID

E

S E

C T

IO

N K

E Y

EL. ± 305.00

EL. 362.00

TYPICAL GUIDE SECTION - KEY

NO SCALE

S-100

NO SCALE

NO SCALE

NO SCALE

NO SCALE

PHOTO #1 - SOUTH LOCK

PHOTO #4 - FLOATING MOORING BITT (TYP) PHOTO #5 - FLOATING MOORING BITT RECESS (TYP) 3/8"=1'-0" 6'4'2'0

M S

T

IV

E R

S

EL. 361.15

PHOTO #2 - FLOATING MOORING BITTS R36 & R37 PHOTO #3 - FLOATING MOORING BITTS R62 & R63

R63 STA 0+30 DS ONLY

EL. ± 308.00 FOR FMB

/4 F

O R F

M B O

N R -6

A

T S

T A

D

S O

N

Y

F

E

D

C

B

A

1 2 3 4 5

EXIST EMBEDDED

STEEL FRAMING

EXIST MOORING

BITT ROLLER

SLOT STEEL

r- =. r1=; r =;

.- -. 1,-. r i

I I I I I I I I I I ' I I I --. ,-1- r-r - - - - -•- - - - - - - - - - - - -•- - - - - - - - - - - -•- - - - - , ·-· 1..:.1 ·-·

I , I I r

I

11•1• • •r-l• I I• 1 ••• 1•11

II I I I I I I I I

... ..,. ------ 1 . .. .J .. ..,,_""' .. P .,,. ,. -- __ ... ... __ ... .. --.......... .-J.--- .. ___ ... __ I I

\ -;;• I I I I \ I L J I I I f =;

� I I I I i"

I I I I I I I I I I I I I I

�.,._.,._.[.,._"\..,._-:1..,._ J '-=-.!-.=-.=-r::1-.=.=-.;r_ I, 1 .. 1 I I 1 .. 1 , ...

---�::J 1:.-.. -:.-:...---.J �11 I •· 'I

I 11 I II 'I

I 11 I II II 'I I

'1-1••-....1l .. 1',""i11 11,..rft L I

1 1;1 I I lo'III, II 11°""..rl' i._--, i

HI

Cr_ - -,ll..11

---•1

- - ·II- - - - - - - - - - - - - - - - - - - - - --- - - - - - - - - - - - - - - - - ·ti- - - -

-H y t 11 I ,..,-.,_

II 11

�1 'I

11 I 'I,_,, II II t�:, 'I -.olil--=--... �----------'---""""....;_ _ ____Jl!!.1 ___ .......J 11 • S-100

TYP

FUTURE WIRE CUT OF

EXIST CONG & FRAMING

EXTENT SHOWN (TYP)

11 I 11 I 11 I

11 II 'I

t.-:.-:.; - .. -:.3 .. '

I

I I I .- -. ,

• I

•!'-. • • ""l ""I I I 'I I I '""Ii""'---·-••,

• I I

• ' I

- - - �.: .- ""'� .. ... ;;:-... -0-- :---;---f-�i \ I I

\ I I

-7- - - - - .. - - - - - - - - - , FACE OF EXIST LOCK WALL _/

EXISTING GUIDE RECESS CORE DRILLING PLAN -AT TOP OF WALL EL 362.00

1"=1'-0"

%PRODUCTION DATA 1%

%PRODUCTION DATA 2% %PRODUCTION DATA 3% %PRODUCTION DATA4%

EXIST EMBEDDED

STEEL FRAMING

3.5" DIA. CORE

DRILL HOLE

(TYP 4 PLCS).

1'

2'- ------

ELEV = 362.00

TOP OF WALL

<J

LI

10" DIA. CORE

DRILL HOLE (BEYOND). --

,�--:-<J :: __ J

EXIST FRAMING

ANCHORS

EXIST CONG WALL

LI

<J

<J

\i'

Ll-

I I I I I I I I I I ti

NOTE: 10" DIA. CORE DRILL HOLE IS

FOR FUTURE WIRE SAW ACCESS.

ELEV=361.15

f--1----- FACE OF EXIST

FRAMING AND

RECESS OPENING

EXIST MOORING BITT

ROLLER SLOT STEEL

CORE DRILL BOTTOM

ELEV ± 305.00

ELEV± 308.00 FOR FMB

R63 STA 0+30 DS ONLY

0 SECTION

2------

1"=1'-0" 0 1' 2'

US Army Corps of Engineers® u.i Oo

WIN

C/lQ !Qz b z b z 0 z

� iii u f-:::; Zc:, 0 Om (/) Uf-en en z w <( () __J w a_ c:: (!)

wz o- __J ::J __J (!) c::

(!) 0 zW

- c::

I- 0en u

SHEET ID

S-100 z t;:

ii':

u (/) w Q

Q w ii5 � z

CERTIFIED FINAL

H2OPTCRM

Highlight

H2OPTCRM

Highlight

H2OPTCRM

Highlight

SECTION 00 73 00 - SUPPLEMENTARY CONDITIONS

The following have been modified:

WAGE RATES

General Decision Number: IN20200006 04/03/2020

Superseded General Decision Number: IN20190006

State: Indiana

Construction Types: Heavy and Highway

Counties: Adams, Allen, Bartholomew, Benton, Blackford, Boone, Brown, Carroll, Cass, Clark, Clay, Clinton, Crawford, Daviess, Dearborn, Decatur, DeKalb, Delaware, Dubois, Elkhart, Fayette, Floyd, Fountain, Franklin, Fulton, Gibson, Grant, Greene, Hamilton, Hancock, Harrison, Hendricks, Henry, Howard, Huntington, Jackson, Jasper, Jay, Jefferson, Jennings, Johnson, Knox, Kosciusko, Lagrange, Lawrence, Madison, Marion, Marshall, Martin, Miami, Monroe, Montgomery, Morgan, Newton, Noble, Ohio, Orange, Owen, Parke, Perry, Pike, Posey, Pulaski, Putnam, Randolph, Ripley, Rush, Scott, Shelby, Spencer, Starke, Steuben, Sullivan, Switzerland, Tippecanoe, Tipton, Union, Vanderburgh, Vermillion, Vigo, Wabash, Warren, Warrick, Washington, Wayne, Wells, White and Whitley Counties in Indiana.

* EXCEPT LAKE, LAPORTE, PORTER AND ST. JOSEPH COUNTIES HEAVY

AND HIGHWAY CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2020. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR

5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/03/2020 1 01/24/2020 2 02/07/2020 3 02/14/2020 4 02/21/2020 5 04/03/2020

ASBE0008-004 07/01/2019

DEARBORN, FAYETTE, FRANKLIN, OHIO, RIPLEY SWITZERLAND AND UNION

COUNTIES

Rates Fringes

Asbestos Workers/Insulator (Includes application of all insulating materials, protective coverings, coatings & finishings to all types of mechanical systems).....$ 30.32 18.50

HAZARDOUS MATERIAL HANDLER

(Includes preparation, wettings, stripping, removal, scrapping, vacuuming, bagging & disposing of all insulation materials, whether they contain asbestos or not, from mechanical systems)..............$ 25.00 13.70

ASBE0017-008 06/01/2019

NEWTON COUNTY:

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR........................$ 50.50 27.80

HAZARDOUS MATERIAL HANDLER

(INCLUDES PREPARATION,

WETTING, STRIPPING REMOVAL

SCRAPPING, VACUUMING, BAGGING

AND DISPOSAL OF ALL

INSULATION MATERIALS, WHETHER

THEY CONTAIN ASBESTOS OR NOT,

FROM MECHAINCAL SYSTEMS).........$ 37.80 24.54

ASBE0018-005 06/01/2019

BROWN, BARTHOLOMEW, BENTON, BOONE, CARROLL, CASS, CLAY,

CLINTON, DECATUR, DELAWARE, ELKHART. FOUNTAIN, FULTON, GREENE,

HAMILTON, HANCOCK, HENDRICKS, HENRY, HOWARD, JASPER, JOHNSON,

KOSCIUSKO, LAGRANGE, MARSHALL, MADISON, MARION, MONROE,

MONTGOMERY, MORGAN, OWEN, PARKE, PULASKI, PUTNAM, RUSH, SHELBY,

STARKE, TIPPECANOE, TIPTON, VERMILLION, VIGO, WARREN and WHITE Counties

ASBESTOS WORKER/HEAT & FROST

INSULATOR (includes application of all insulating materials, protective coverings, coatings and finishings to all types of mechanical systems)..............$ 32.20 21.38

HAZARDOUS MATERIAL HANDLER

(includes preparation, wettings, stripping, removal, scrapping, vacuuming, bagging & disposing of all insulation materials, whether they contain asbestos or not, from mechanical systems).........$ 23.00 14.40

ASBE0037-004 04/02/2019

DAVIESS, DUBOIS, GIBSON, KNOX, MARTIN, PIKE, POSEY, SPENCER,

SULLIVAN, VANDERBURGH AND WARRICK COUNTIES

INSULATOR (includes application of all insulating materials protective coverings, coatings an finishes to all types of mechanical systems. Also the application of firestopping, material openings and penetrations in walls, floors, ceilings, curtain walls and all lead abatement.)...$ 31.12 20.62

HAZARDOUS MATERIAL HANDLER

(Includes preparation, wetting, stripping, removal, scrapping, vacuuming, bagging and disposing of all insulation materials, whether they contain asbestos or not, from mechanical systems).........$ 23.00 14.40

ASBE0041-002 07/01/2019

ADAMS, ALLEN, BLACKFORD, DE KALB, GRANT, HUNTINGTON, JAY,

MIAMI, NOBLE, STEUBEN, WABASH, WELLS AND WHITLEY COUNTIES:

INSULATOR (includes application of all insulating materials, protective coverings, coatings and finishings to all types of mechanical systems)..............$ 29.50 16.89

HAZARDOUS MATERIAL HANDLER

(includes preparation, wettings, stripping, removal, scrapping, vaccuming, bagging & disposing of all insulation materials, whether they contain asbestos or not, from mechanical systems)..............$ 23.00 14.40

* ASBE0051-003 03/01/2020

CLARK, CRAWFORD. FLOYD, HARRISON, JACKSON, JEFFERSON, JENNINGS,

LAWRENCE, ORANGE, PERRY, SCOTT, and WASHINGTON Counties

INSULATOR (Includes application of all insulating materials, protective coverings, coatings and finishings to all types of mechanical systems)..............$ 25.81 17.19

HAZARDOUS MATERIAL HANDLER

(includes preparation, wettings, stripping, removal, scrapping, vaccuming, bagging & disposing of all insulation materials, whether they contain asbestos or not, from mechanical systems)..............$ 19.80 13.30

ASBE0079-002 07/01/2017

RANDOLPH AND WAYNE COUNTIES

INSULATOR (Includes application of all insulating materials, protective coverings, coatings & finishings to all types of mechanical systems)..............$ 22.25 8.89

HAZARDOUS MATERIAL HANDLER

(Includes preparation, wetting, stripping, removal, scrapping, vacuuming, bagging & disposing of all insulation materials, whether they contain asbestos or not, from mechanical systems)).............$ 25.00 13.70

BRIN0003-001 06/01/2019

INDIANAPOLIS

BOONE, HANCOCK, HENDRICKS, JOHNSON, MARION, MONTGOMERY, MORGAN

and SHELBY COUNTIES

Bricklayer, Stone Mason, Pointer, Caulking................$ 32.16 14.35

TERRAZZO FINISHER................$ 20.23 10.26

TERRAZZO WORKER/SETTER...........$ 32.27 14.02

Tile & Marble Finisher...........$ 21.02 9.37 Tile, Marble Setter..............$ 31.61 13.92

BRIN0004-004 06/01/2019

FORT WAYNE

ADAMS, ALLEN, DEKALB, HUNTINGTON, NOBLE, STEUBEN, WELLS AND

WHITLEY COUNTIES:

BRICKLAYER (STONE MASON,

MARBLE MASONS, POINTER,

CLEANER, AND CAULKER)............$ 30.37 16.23

Terrazzo Grinder Finisher........$ 27.00 12.74 Terrazzo Worker Mechanic.........$ 31.00 16.42 Tile Setter & Marble Mason Mechanic.........................$ 26.88 14.26 Tile, Marble & Terrazzo Finisher.........................$ 23.63 12.34

BRIN0004-005 06/01/2017

CRAWFORD, DUBOIS, PERRY, POSEY, SPENCER, VANDERBURGH, and WARRICK Counties

BRICKLAYER.......................$ 30.00 14.71

TILE FINISHER....................$ 20.31 12.00

TILE SETTER......................$ 26.69 12.00

BRIN0004-009 06/01/2019

BARTHOLOMEW, BROWN, DEARBORN, DECATUR, JENNINGS, MONROE, OHIO,

OWENS, RIPLEY and SWITZERLAND COUNTIES

Bricklayer, Stonemason...........$ 29.01 14.32

TERRAZZO FINISHER................$ 20.23 10.26

TERRAZZO WORKER/SETTER...........$ 32.27 14.02

Tile & Marble Finisher...........$ 21.02 9.37 Tile, Marble Setter..............$ 31.61 13.92

BRIN0004-010 06/01/2019

CLARK, FLOYD, and HARRISON Counties

Rates Fringes

BRICKLAYER

BRICKLAYERS, STONEMASONS

AND CEMENT MASONS...........$ 28.00 13.92

BRIN0004-015 08/23/2019

TERRE HAUTE

CLAY, DAVIESS, GIBSON, GREENE, KNOX, MARTIN, PARKE, PIKE,

PUTNAM, SULLIVAN, VERMILLION and VIGO COUNTIES

BRICKLAYER

BRICKLAYERS, STONE MASONS

and POINTER/

CLEANER/CAULKER.............$ 32.16 14.27

CEMENT MASON (Greene and Sullivan Counties)..........$ 27.78 11.02

CEMENT MASON (REMAINING

COUNTIES)...................$ 31.16 14.27

TERRAZO FINISHER............$ 20.23 10.26

TERRAZZO WORKER.............$ 32.27 14.02

TILE LAYER, MARBLE MASON,

MOSAIC WORKER...............$ 31.61 13.92

BRIN0004-016 06/01/2019

MUNCIE

BLACKFORD, DELAWARE, FAYETTE, FRANKLIN, HAMILTON, HENRY, JAY,

MADISON, RANDOLPH, RUSH, TIPTON, UNION and WAYNE COUNTIES

Bricklayer, Stonemason, Pointer, Caulker & Cleaner.......$ 30.78 16.07

TERRAZZO FINISHER................$ 20.23 10.26

TERRAZZO WORKER/SETTER...........$ 32.27 14.02

Tile & Marble Finisher...........$ 21.02 9.37 Tile & Marble Setter; Mosaic Worker...........................$ 31.17 13.01

BRIN0006-001 06/01/2019

JASPER, NEWTON & STARKE COUNTIES

Rates Fringes

BRICKLAYER (Including Stonemason, and Pointer, Caulker & Cleaner)...............$ 38.12 24.40 Tile, Marble & Terrazzo Worker...$ 37.05 21.64

BRIN0011-001 06/01/2019

LAFAYETTE

BENTON, CARROLL, CLINTON, FOUNTAIN, TIPPECANOE, WARREN and

WHITE COUNTIES

Bricklayer, Stonemason, Pointer, Caulker & Cleaner.......$ 29.62 17.05

TERRAZZO FINISHER................$ 20.23 10.26

TERRAZZO WORKER/SETTER...........$ 32.27 14.02

Tile & Marble Finisher...........$ 21.02 9.37 Tile & Marble Setter; Mosaic Worker...........................$ 31.61 13.92

BRIN0018-002 06/01/2019

CASS, ELKHART, FULTON, GRANT, HOWARD, KOSCUISKO, LAGRANGE,

MARSHALL, MIAMI, PULASKI, WABASH

Bricklayer, Caulker, Cleaner, Pointer..........................$ 29.49 16.77

CARP0002-023 04/01/2019

DEARBORN, JACKSON, JENNINGS, OHIO, RIPLEY AND SWITZERLAND

CARPENTER........................$ 25.45 22.82

CARP0133-001 04/01/2019

BOONE, CLAY, FOUNTAIN, MONROE, MONTGOMERY, MORGAN, OWEN,

PARKE, PUTNAM, VERMILLION AND VIGO COUNTIES

CARPENTER........................$ 27.06 21.87

CARP0133-003 04/01/2019

HAMILTON, HANCOCK, HENDRICKS, JOHNSON (Townships of Clark, Camp Atterbury north of Hospital Road, Pleasant, White River), and MARION Counties

CARPENTER........................$ 28.17 21.87

CARP0175-004 04/01/2019

CLARK, FLOYD, HARRISON, JEFFERSON,SCOTT AND WASHINGTON COUNTIES

Rates Fringes

CARPENTER........................$ 24.88 23.39

CARP0215-002 04/01/2019

BENTON, CARROLL, CLINTON, PULASKI, TIPPECANOE, WARREN AND WHITE

CARPENTER........................$ 28.29 20.06

CARP0224-011 04/01/2019

CRAWFORD, DUBOIS, PERRY, PIKE, POSEY, SPENCER, VANDERBURGH AND

WARRICK COUNTIES:

CARPENTER........................$ 24.95 23.32

CARP0224-012 04/01/2019

DAVIESS, GIBSON, GREENE, KNOX, LAWRENCE, MARTIN, ORANGE AND

SULLIVAN COUNTIES:

CARPENTER........................$ 25.30 23.37

CARP0232-003 04/01/2019

ALLEN, DEKALB, LAGRANGE, NOBLE, STEUBEN and WHITLEY COUNTIES

Rates Fringes

CARPENTER........................$ 27.04 21.19

CARP0301-001 04/01/2019

BARTHOLOMEW, BROWN,(Camp Atterbury south of Hospital Road), DECATUR, FRANKLIN, JOHNSON (Townships of Blue River, Franklin, Hensley, Needham, Nineveh, Union) , RUSH AND SHELBY COUNTIES

CARPENTER........................$ 26.62 21.87

CARP0413-003 04/01/2019

ADAMS, CASS, ELKHART, FULTON, GRANT, HOWARD, HUNTINGTON,

KOSCIUSKO, MARSHALL, MIAMI, TIPTON, WABASH AND WELLS COUNTIES:

CARPENTER........................$ 27.36 21.02

CARP0999-001 06/01/2017

JASPER, NEWTON, AND STARKE COUNTIES

Rates Fringes

CARPENTER........................$ 37.56 26.42

CARP1016-001 04/01/2019

BLACKFORD, DELAWARE, FAYETTE, HENRY, JAY, MADISON, RANDOLPH,

UNION AND WAYNE COUNTIES

CARPENTER........................$ 26.92 21.87

CARP1076-004 04/01/2016

HAMILTON and MARION Counties, and the following Townships in JOHNSON County: Camp Atterbury (North of Hospital Rd.), Clark, Pleasant, and White River

MILLWRIGHT.......................$ 26.81 19.28

CARP1076-005 06/01/2017

JASPER, NEWTON, PULASKI, and STARKE Counties

Rates Fringes

MILLWRIGHT.......................$ 37.66 26.42

CARP1076-006 06/01/2018

BARTHOLOMEW, BLACKFORD, BOONE, BROWN, CLAY, DECATUR, DELAWARE,

FAYETTE, FOUNTAIN, FRANKLIN, HAMILTON, HANCOCK, HENDRICKS,

HENRY, JAY, JOHNSON, MADISON, MARION, MONROE, MONTGOMERY,

MORGAN, OWEN, PARKE, PUTNAM, RANDOLPH, RUSH, SHELBY, UNION,

VERMILLION, VIGO, AND WAYNE COUNTIES

MILLWRIGHT.......................$ 28.18 22.39

CARP1080-001 06/01/2018

GIBSON, GREENE, POSEY, SULLIVAN, VANDERBURGH and WARRICK

MILLWRIGHT

ZONE 1

POSEY, VANDERBURGH and

WARRICK COUNTIES...........$ 28.57 23.01

ZONE 2

GIBSON, GREENE AND

SULLIVAN COUNTIES..........$ 27.29 23.95

ELEC0016-003 04/01/2019

CRAWFORD, DAVIESS, DUBOIS, GIBSON, LAWRENCE, MARTIN, ORANGE,

PERRY, PIKE, POSEY, SPENCER, VANDERBURGH, WARRICK

ELECTRICIAN......................$ 38.02 17.61

ELEC0016-006 06/01/2019

CRAWFORD, DAVIESS, DUBOIS, GIBSON, LAWRENCE, MARTIN, ORANGE,

PERRY, PIKE, POSEY, SPENCER, VANDERBURGH, WARRICK

ELECTRICIAN (Communication Technician Only).................$ 28.03 15.04

ELEC0071-006 01/02/2019

DEARBORN, OHIO, and SWTIZERLAND COUNTIES

Rates Fringes

Line Construction:

Equipment Operator..........$ 33.62 13.46 Groundman...................$ 24.17 11.38 Lineman & Cable Splicers....$ 38.27 14.48

ELEC0153-003 06/03/2019

ELKHART, KOSCIUSKO and MARSHALL COUNTIES

Rates Fringes

Communication Technician.........$ 26.50 18.33

ELECTRICIAN......................$ 34.67 24.27

Includes the installation, operation, inspection, modification, maintenance and repair of systems used for the transmission and reception of signals of any nature, for any purpose, including but not limited to , sound and voice transmission/transference systems, communication systems that transmit or receive information and /or control systems, television and video systems, micre-processor controlled fire alarm systems, and security systems and the performance of any task directly related to such installation or service. The scope of work shall exclude the installation of electrical power wiring and the installation of conduit raceways exceeding fifteen (15) feet in length.

ELEC0212-002 11/26/2018

DEARBORN, OHIO, and SWITZERLAND COUNTIES

Rates Fringes

ELECTRICIAN (Communication Technician Only).................$ 24.35 10.99

ELEC0212-009 06/03/2019

DEARBORN, OHIO, and SWITZERLAND COUNTIES

Rates Fringes

ELECTRICIAN......................$ 30.18 18.89

ELEC0305-003 01/01/2020

ADAMS, ALLEN, DE KALB, HUNTINGTON, LAGRANGE, NOBLE, STEUBEN,

WELLS, and WHITLEY COUNTIES

ELECTRICIAN......................$ 33.44 18.14

ELEC0305-004 06/01/2019

ADAMS, ALLEN, DE KALB, HUNTINGTON, LAGRANGE, NOBLE, STEUBEN,

WELLS, and WHITLEY COUNTIES

Technician Only).................$ 28.00 15.98

ELEC0369-005 05/29/2019

CLARK, FLOYD, HARRISON, JACKSON, JEFFERSON, SCOTT, and WASHINGTON Counties

ELECTRICIAN......................$ 32.44 17.22

ELEC0481-003 05/27/2019

BARTHOLOMEW, BOONE, DECATUR, HAMILTON, HANCOCK, HENDRICKS,

JENNINGS, JOHNSON, MADISON, MARION, MONTGOMERY, MORGAN, PUTNAM,

RIPLEY, RUSH AND SHELBY COUNTIES

ELECTRICIAN......................$ 34.85 23.03

ELEC0481-004 06/01/2019

BARTHOLOMEW, BOONE, DECATUR, HAMILTON, HANCOCK, HENDRICKS,

JENNINGS, JOHNSON, MADISON, MARION, MONTGOMERY, MORGAN, PUTNAM,

RIPLEY, RUSH AND SHELBY COUNTIES

Technician Only).................$ 27.60 15.97

ELEC0531-002 05/27/2019

JASPER, PULASKI, and STARKE COUNTIES

Rates Fringes

ELECTRICIAN......................$ 40.15 26.45

ELEC0531-003 05/28/2018

JASPER, PULASKI, and STARKE COUNTIES

Rates Fringes

ELECTRICIAN (Communication Technician Only).................$ 27.64 13.23

ELEC0538-005 01/01/2020

FOUNTAIN, VERMILLION, and WARREN Counties

Rates Fringes

ELECTRICIAN......................$ 35.30 21.36

ELEC0538-009 09/01/2018

FOUNTAIN, VERMILLION, and WARREN Counties

Rates Fringes

ELECTRICIAN (Communication Technician Only).................$ 32.82 16.28

ELEC0668-001 06/01/2019

BENTON, CARROLL, CASS, FULTON, TIPPECANOE and WHITE COUNTIES

Technician Only).................$ 28.90 14.53

ELEC0668-002 06/01/2018

BENTON, CARROLL, CASS, FULTON, TIPPECANOE and WHITE COUNTIES

Rates Fringes

ELECTRICIAN......................$ 33.60 18.52

FOOTNOTE: a. PAID HOLIDAYS: New Years Day, Memorial Day, July 4th, Labor Day, Veterans Day Thanksgiving Day and Christmas Day

ELEC0697-003 08/26/2019

NEWTON COUNTY

Rates Fringes

ELECTRICIAN (Communication Technician Only).................$ 34.00 26.70

ELEC0697-006 05/27/2019

NEWTON COUNTY

Rates Fringes

ELECTRICIAN......................$ 41.50 29.57

ELEC0702-003 12/30/2019

DUBOIS, GIBSON, PERRY, PIKE, POSEY, SPENCER AND VANDERBURGH

Line Construction:

GROUNDMAN, Class A..........$ 28.58 29% + 7.75

GROUNDMAN-EQUIPMENT

OPERATOR (All other equipment)..................$ 36.35 29% + 7.75

HEAVY-EQUIPMENT OPERATOR

(All crawler type equipment D-4 and larger)...$ 41.49 29% + 7.75

LINEMAN.....................$ 50.63 29% + 7.75

ELEC0725-007 06/01/2018

BROWN, CLAY, GREENE, KNOX, MONROE, OWEN, PARKE, SULLIVAN AND

VIGO COUNTIES

Communication Technician.........$ 28.10 13.68

Includes the installation, operation, inspection, maintenance, repair and service of radio, television, recording, voice sound and vision production and reproduction apparatus, equipment and appliances used for domestic, commercial, education, entertainment and private telephone systems.

ELEC0725-014 03/01/2018

BROWN, CLAY, GREENE, KNOX, MONROW, OWEN, PARKE, SULLIVAN AND

VIGO COUNTIES

ELECTRICIAN......................$ 36.22 19.14

ELEC0855-002 06/01/2018

BLACKFORD, DELAWARE, FAYETTE, FRANKLIN, HENRY, JAY, RANDOLPH,

UNION and WAYNE Counties

Technician Only).................$ 27.64 14.15

ELEC0855-004 06/01/2019

BLACKF…