Q_and_A.docx
DOCX document 13 KB Posted
- Attached to
- Tactical Operations Trailer Modification
- Solicitation number
- W912PQ16R2579
About this file
Q and A dated 05APR2016
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Wheel_Chalk_Photo.pdf | ||
| TOC_Install_Diagram.pptx | PPTX presentation | |
| CD_2015-O0005.pdf | ||
| PR_10812579_TOC_Trailer_SOW.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Q: The antenna wire is fed from the bottom of the rack to the switch. Is there sufficient length of wire to connect to a new xtva to the right of the 22" tv?
A: Yes, but the antenna wire from the mass should be connected to the amplifier prior to going to the XTVA.
Q: Is a mounting bracket also supplied with the 22" TV?
A: No
Q: Does the slide out shelf need to be able to slide in and out like the current other shelves in the rack?
A: no
Q: Is the timer a 110v or a 12v timer?
A: 110, current outlets are reachable by the supplied power cord.
Q: The Model SK-SWM3 Dish once mounted on it mounting plate shows a height of 13.8" in the Winegard catalog. Is that acceptable?
A: yes
Q: Is the Motorola APX7500 07 Supplied by customer?
A: No
Q: Does #10 and # 11 duplicate itself?
A: No, #10 is for the radio and #11 is for the radio speaker
Q: There are three (3) LMR200 antenna wires currently in the Nycoil going to the mast and three (3) antennas. UHF, VFV and 800 Mhz. Is the request to add more antennas? There are no extra antennas in the box on the mast and the Nycoil is full making it a physical impossibility to add additional wires.
A: There are 2-coax RG6 (up to 450mhz) and 3- CAT6 cables in the Nycoil. If unable to utilize the 2-RG6 cables then they can be removed IOT make room for correct cable.
Q: For the Iridium Fixed Antenna; please provide additional information as what is the blue antenna mast? (Size, weight, mounting method) A: The blue antenna mast is a 1/2"DX12" tall pipe that is attached to a swivel base. The base will need to be attached to the trailer. It is included
Q: Need more details of the PTP antenna mast (Size and weight, model) A: the mast needs to be a 2" diameter aluminum pipe that is 3 feet long. It will require 1/4"holes drilled through the pipe every 8" on center.
Q: Need model of the backup monitor in the tow vehicle. Currently all of the wires are being used in the trailer plug for other items, are there plans to change the wiring in the plug configuration to allow this to happen?
A: Crimestopper SV-6911, No plans for the plugs to be changed at this time but are open to any vendor recommendations.
Q: One of the attachments in the RFP is a picture of wheel chocks but they are not mentioned in the RFP?
A: 4c on the Truck RFP
File details come from the government source that posted it. Updated .