W912PQ-23-Q-0046.pdf

SEE ADDENDUM

(No Collect Calls)

W912PQ23Q0046 16-Aug-2023

b. TELEPHONE NUMBER

518 786 0399

8. OFFER DUE DATE/LOCAL TIME

08:00 AM 08 Sep 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912PQ9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

RICHARD W. POWELL

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

SEE SCHEDULE

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

USPFO NY PURCHASING & CONTRACTING

330 OLD NISKAYUNA ROAD

LATHAM NY 12110-2224

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$25,000,000

NAICS:

561621

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF95

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912PQ23Q0046

Section SF 30 - BLOCK 14 CONTINUATION PAGE

ESS SOW

STATEMENT OF WORK (SOW)

FOR

JAMAICA ARMORY ELECTRIC SECURTIY SYSTEMS INSTALLATION

1. General:

1.1 Description: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, to provide and install complete systems for Closed Circuit Television Cameras, FIPS Access Control, Video Intercom and Burglar Alarm.

1.1.1 Objective: Provide the New York Army Reserve National Guard Jamaica Queens Armory located at 93-05 168th St, Jamaica, NY 11433 with National Guard approved CCTV, ACS, Intercom, and Burglar alarm. These systems will be integrated and together form a layered security to protect NYARNG employees and property. This is a large facility of 240,000-square-foot that houses the New York Army Reserve National Guard serving a home to multiple units.

1.2 Approved Equipment List:

Part Number Brand Description Qty

02218-001 Axis Axis P3727-PLE 9

02328-001 Axis Axis Q3265-LVE

9MM

01752-004 Axis Axis Q6075-E 1

01564-001 Axis Axis D2110-VE Security Radar

5505-541 Axis ACI Conduit Adapter 1/2"-3/4"

5505-641 Axis ACI Conduit Adapter 3/4" NPS

5801-121 Axis Axis Bird Control Spike 10pcs

5017-641 Axis T91A64 Corner Bracket

5504-821 Axis T91D62 1.5" Adapter

5507-271 Axis T91D64 Telescope Parapet Mount

5502-431 Axis T94A01D Pendant Kit

01513-001 Axis T94N01D Pendant Kit

02391-001 Axis TP3815-E Smoked Dome

GSC-Base 5.10.3126.0

Genetec Base Security Desk Software

GSC-OM-S Genetec Omnicast Standard License

GSC-OM-S-1C Genetec Omnicast Standard 1 Ch License

ADV-STANDARD-

5Y

Genetec Omnicast Advantage Standard

GSC-SY-S Genetec Base Access Control Software

GSC-1SDK-

CODEBENCH

Genetec SDK Database Lisence

Sy-PVC-FXRDR Genetec HID PIVCLASS Card software

SY-PVC-BASE-27-

Genetec Card Certificate manager

SY-PVC-BASE-MS Genetec Codebench PIV Software

R54270101-ELITE Genetec Card Encoder/reader

SY-CLOUDLINK Genetec Cloud Link Hardware Controler

SY-LP4502 Genetec Mercury ACS Card Controler

SY-MR52-S3 Genetec Mercury MR52 2- Reader Interface

SY-

923PPPNEK000P4

Genetec HID FIPS Card Readers

SY-MR16IN-S3 Genetec Mercury 16 Input Board

SY-MR16OUT-S3 Genetec Mercury 16 Output Board

SY-DV16RD-E8M2 Genetec 8 Board Enclosure W/ PSUs

TM400 Altronix 1 Board Mercury Enclosure

IX-MV7-HB Aiphone IX-MV-7 Black Intercom Answering Station

IX-EA Aiphone IX-EA Door Station

LANDO_SS-

10X8E

PRO Pedistal Pro Enclosure

21951099 Genisis Profusion 1000ft Roll Riser

11041101 Genisis 22 AWG 4 Conductor wire 1000ft

12061109 Genisis 22 AWG 6 Conductor wire IDS 1000ft

Cat6A Assorted Cat6A Gray cabel pelnium rated

DS160 BOSCH Exit Motion Detector

MR-101/CR Fire-Lite Relays for Fire release/ OHD

B030-008-17-IP Tripp-Lite Rack Monitor+Keyboard +Mouse

55" 4k Video Monitor

Various 55" 4K Commercial CCTV Monitor

43" 4k Video Monitor

Various 43" 4K Commercial CCTV Monitor

55" Rated TV Mount

Various Arm style TV mount for 55" TV

1500Watt AVR

UPS

Assorted TAA compliant

1500W AVR UPS

Battery Backup

200-36HD GRI Floor Mounted OHD contacts

1000-65V FLAIR DPST DOOR

BMS

DS9370 Bosch 360 Degree PIR Motion Detector

TROVE2BL2 Altronix Trove 2 Enclosure 2

MM24 Altronix Altronix MM24 Magnet Mount

1.3 Installation Requirements. The Contractor shall:

1.3.1 Provide all required supplies and materials to complete installation of the following systems.

1.3.1.1 CCTV – Closed Circuit Television

1.3.1.2 ACS- FIPS Access Control

1.3.1.3 Video Intercom

1.3.1.4 Perimeter IDS Alarm- Burglar Intrusion Detection

1.3.2 During existing construction 90% of the conduit for the instillation of the above systems should have been installed. These conduits should be assumed as empty with pull string installed. The remaining 10% of conduit, fittings, and boxes should be included in this Scope and project.

1.3.2 Only the above approved manufacture & model must be used to maintain ARNG Cyber Security Compliance. Any deviation or substitution must be approved by NYARNG ESS POC below. All equipment must be COO, NDAA & TAA compliant.

1.3.3 Due to ARNG Cyber Security Compliance there will be several “Supplied by Others” items that will be require integration with this contract.

1.3.3.1 CCTV & ACS Genetec Database & Storage server will be supplied and require instillation, setup & integration.

1.3.3.2 Three CCTV & ACS Genetec workstation computers will be supplied and require installation setup & instillation.

1.3.3.3 ELK M1 Gold Intrusion Alarm panel, keypads & input & output expanders will be supplied and require installation, setup, and integration.

2. Detailed ESS system information.

2.1. CCTV

2.1.1. Camera 1 Bridge Camera: AXIS Multi-Sensor P3265-PLE wall mounded 12ft above street level including bird spikes. Camera wiring will terminate at the MDF RM-112.

2.1.2. Camera 2 Front Steps Camera: AXIS Multi-Sensor P3727-PLE corner mounted on the front entryway as high as possible. Including Smoked Dome and bird spikes. Camera wiring will terminate at the MDF RM-112.

2.1.3. Camera 3 Main Lobby: AXIS Multi-Sensor P3727-PLE Ceiling mounted in lobby. Camera wiring will terminate at the MDF RM-112.

2.1.4. Camera 4 Jam St Corner: AXIS Multi-Sensor P3727-PLE corner mounted 12ft above street level including Smoked Dome and bird spikes. Camera wiring will terminate at the MDF RM-112.

2.1.5. Camera 5 Side Camera 1: AXIS Multi-Sensor P3727-PLE corner mounded 12ft above street level including Smoked Dome and bird spikes.

Camera wiring will terminate at the MDF RM-112.

2.1.6. Camera 6 G130 inside: AXIS Q3265-LVE wall mounted, height to match height of OHD. Camera wiring will terminate at the MDF RM-112.

2.1.7. Camera 7 side lobby: AXIS Q3265-LVE Ceiling mounted. Camera wiring will terminate at the MDF RM-112.

2.1.8. Camera 8 Side Camera 3: AXIS Multi-Sensor P3727-PLE wall mounded at the top left corner of door G132. Including Smoked Dome and bird spikes.

Camera wiring will terminate at the MDF RM-112.

2.1.9. Camera 9 Side camera 4: AXIS Multi-Sensor P3727-PLE wall mounded 12ft above street level including Smoked Dome and bird spikes. Camera wiring will terminate at the MDF RM-112.

2.1.10. Camera 10 Side camera 5: AXIS Multi-Sensor P3727-PLE wall mounded 12ft above street level including Smoked Dome and bird spikes.

Camera wiring will terminate at the basement IDF RM-041A.

2.1.11. Camera 11 Track side PTZ: Axis Q6075-E PTZ mounted to roof knee wall with Axis T9ID64 Parapet Mount and bird spike kit. An Axis D2110-VE Security Radar will be mounted below the PTZ to detect movement on the lower roof section. This will require a separate Cat6A run in the same conduit as camera 11. Camera and radar wiring will terminate at

IDF RM-027A.

2.1.12. Camera 12 Vault Camera 1: AXIS P3265-PLVE Wall mounted to column, wiring will terminate to basement IDF RM-041A.

2.1.13. Camera 13 Vault Camera 2: AXIS P3265-PLVE Wall mounted, wiring will terminate to basement IDF RM-041A.

2.1.14. Camera 14 Vault Camera 3: AXIS P3265-PLVE Wall mounted to column, wiring will terminate to basement IDF RM-041A.

2.1.15. Camera 15 Vehicle Parking: AXIS P3727-LVE Pendant mounded height will be just below room lighting. Wiring will terminate at MDF RM-112.

2.1.16. Camera 16 Vault Camera 4: AXIS P3265-PLVE Ceiling mounted wiring will terminate to basement IDF RM-041A.

2.1.17. Camera 17 SIPR Door 306: AXIS Q3265-LVE should be wall mounted to view SIPR door 309. Wiring will terminate at IDF RM-306.

2.1.18. Camera 18 Side camera 6: AXIS Multi-Sensor P3727-PLE wall mounded 12ft above street level including Smoked Dome and bird spikes.

Camera wiring will terminate at the basement IDF RM-041A.

2.1.19. Camera 19 Vault Camera 5: AXIS P3265-PLVE Wall mounted to column, wiring will terminate to basement IDF RM-041A.

2.1.20. Camera 20 Vault Camera 6: AXIS P3265-PLVE Wall mounted, wiring will terminate to basement IDF RM-041A.

2.1.21. Video Storage will be setup on the provided storage appliance that will need installation in the provided network rack in MDF RM-112. There will be a provided 4 post rack for which to install the server and the KVM monitor and keyboard. The storage appliance will be pre-configured with Windows Server by NYARNG and will require Genetec Software instillation & setup.

Genetec version 5.10.3126.0.

2.1.22. Video Workstations.

2.1.22.1. Workstation 1 Security: will be installed in RM-133 “ACP or Guard

Booth”. This workstation will have 3 monitors one large 55” monitor wall mounted. The workstation itself and two smaller monitors will be provided by others. This contract shall include all wiring and cables to connect & setup the workstation, battery backup, two 27” monitors, 55” monitor, Genetec Security center software setup and installation.

2.1.22.2. Workstation 2 Officer In Charge: will be installed in RM-403 it shall include one large 55” monitor and wall mount. The workstation itself will be supplied by others. This contract shall include all wiring and cables to connect & setup the workstation, battery backup, 55” monitor, and Genetec Security center software setup and installation.

2.1.22.3. Workstation 3 Superintendent: Will be installed in RM-117 and is to just be a workstation and 27” monitor supplied by others. This contract shall include all wiring and cables to connect & setup the workstation, battery backup, 27” monitor, and Genetec Security center software setup and installation.

2.1.23. Networking of CCTV equipment.

2.1.23.1. All switching and networking infrastructure is to be provided by NYARNG or others. It will be comprised of Cisco Switches with Fiber interconnects. The provided network switches will have dedicated port space provided by NYARNG ESS POC. The provided switches are only capable of providing 15W of POE power. All cameras/devices that require more than 15W of POE will need an injector that is to be neatly mounted in the data rack.

2.1.23.2. CCTV wiring is to be CAT6A in Gray color. All circuits should be run to comply with all NEC & NFPA standards.

2.1.23.3. Network Power/battery backup in MDF & IDF shall be provided by others. Multi outlet power strips may be required for multi devices such as POE injectors.

2.1.23.4. Network IP address will be provided by NYARNG ESS POC.

2.1.24. Training, an additional 8 hour of user training shall be included.

Date may not directly follow install and will be scheduled at completion of install.

2.1.25. Mounting of CCTV Cameras may require additional conduit & boxes not listed in the above. CCTV cameras should be mounted in a manner to avoid tampering or disruption. Conduit and wiring must meet NEC & NFPA guidelines.

2.1.25.1. All CCTV equipment will be grounded or bonded according to manufacture guidelines.

2.1.26. All CCTV wiring shall have permeant written labels at each end to identify the camera number, location, terminating room.

2.1.26.1.

2.1.27. CCTV Acceptance of completion terms:

2.1.27.1. All cameras will be mounted, and all conduit & fittings connected and tightened to manufacture specifications.

2.1.27.2. All wiring will be complete and tested for operation.

2.1.27.3. All cameras will have their IP & password settings set to what is provided by NYARNG ESS Department.

2.1.27.4. All Cameras will have all views adjusted for optimal viewing.

2.1.27.5. Genetec software will be setup on the server and registered to

Genetec New York National Guard Account.

2.1.27.6. All cameras will be connected to the server for continuous recording.

2.1.27.7. All workstations will be set-up and connected to the server.

2.1.27.8. All wiring and required accessories shall be installed according to manufacture specifications.

2.1.27.9. All cameras must be recording and viewable at all workstations for sign-off.

2.2. FIPS Access Control

2.2.1. Doors with card reader

2.2.1.1. Door G132 Main side entrance: The roll-up overhead door located outside the store front door system will have a card reader connected to the OHD controls to open the door at the beginning of a workday. Card reader only. ACS wiring will terminate at the control panel located in RM 133.

2.2.1.2. Door E132 Main side entrance: This will be a glass storefront style door. This door will have both a card reader and an Aiphone IX-EA intercom unit. ACS wiring will terminate at the control panel located in RM 133. Intercom network will terminate at MDF room 112.

2.2.1.3. Door 132 Main side entrance: The most inner door of the vestibule which will allow access into the facility. This door will also have a card reader and Aiphone IX-EA intercom unit. ACS wiring will terminate at the control panel located in RM 133. Intercom network will terminate at MDF room 112.

2.2.1.4. Door G130 Main MOV OHD: A roll up door used to enter and exit the interior parking area of the facility. This door will have a card reader located on the secure side to allow operation of the OHD. The door shall close automatically after a car enters or exits. This will have to be coordinated with the OHD contractor. ACS wiring will terminate at the control panel located in RM 133.

2.2.1.5. Door 133 Guard Booth Door: This door is the main entrance to the guard booth. It shall have a card reader only. ACS wiring will terminate at the control panel located in RM 133.

2.2.1.6. Door Es15CR Stairwell Exit door: This will be the secondary entry exit door. It will include a carder reader and Aiphone IX-EA intercom unit. ACS wiring will terminate at the control panel located in RM 133.

Intercom network will terminate at IDF room 042A.

2.2.1.7. Door 134ACR FMS entry door: This is the main entry door into the FMS maintenance shop. It shall have a card reader and Aiphone IX-EA intercom unit. ACS wiring will terminate at the control panel located in RM 133. Intercom network will terminate at MDF room 112.

2.2.1.8. Door 309 SIPR Room door: This Door will have a card reader to control a High Security Day lock. Wiring and controller for this door will have to mount inside of RM 309. Use of Altronix TM400 enclosure here.

2.2.2. Door Position monitoring.

2.2.2.1. All other exterior doors and overhead doors shall be monitored with the Genetec ACS system. Conduit should be run to doors during construction. This contract shall include the install of FLAIR 1000-65V DPST door contacts. One half of the contacts will connect to the Genetec ACS system to monitor for door props.

2.2.2.2. Please refer to building plans for locations.

2.2.3. ACS device field wiring terminations shall be completed via solder and heat shrink when no terminal screw is present. Example when connecting field wiring to card reader wires must be stripped and connected via a hot solder joint and then covered with heat shrink. No twist or crimp mechanical connectors are permitted.

2.2.4. All ACS wiring shall have permeant written labels at each end to identify the door, function , terminating room.

2.2.5. ACS control panels

2.2.5.1. Main ACS Control will be in the MDF RM-112. It will be co-located with the Trove cabinet for the ELK Burg Alarm. It will intergrade with the ELK Burg Alarm and cabinets need to connect.

2.2.5.2. Secondary ACS control cabinet will be in the Guard Booth RM-133.

It will be co-located with the Trove cabinet for the ELK Burg Alarm. It will intergrade with the ELK Burg Alarm and cabinets need to connect.

2.2.5.3. Third ACS control cabinet will be in SIPRNET RM-309. It will be a single control board that controls the day lock part of the DR-309.

2.2.6. ACS Server will run on the same hardware and workstations as CCTV. It will be installed and setup according to NYARNG ESS specifications. FIPS compliance to read military CAC cards will be installed and setup. Genetec version 5.10.3126.0.

2.2.7. Networking of ACS equipment.

2.2.7.1. All switching and networking infrastructure is to be provided by

NYARNG or others. It will be comprised of Cisco Switches with Fiber interconnects. The provided network switches will have dedicated port space provided by NYARNG ESS POC. The provided switches are only capable of providing 15W of POE power. All devices that require more than 15W of POE will need an injector that is to be neatly mounted in the data rack.

2.2.7.2. ACS network wiring is to be CAT6A in Gray color.

2.2.7.3. Network Power/battery backup in MDF & IDF shall be provided by others. Multi outlet power strips may be required for multi devices such as POE injectors.

2.2.7.4. Network IP address will be provided by NYARNG ESS POC.

2.2.8.

2.2.9. All access control components will be installed according to manufactures specifications, NEC, and NFPA guidelines.

2.2.10. Mounting height of all ACS user components must comply with

ADA regulation.

2.2.11. Acceptance of completion terms:

2.2.11.1. All doors with card readers will be installed as a complete system to include door position switch Request to exit installed and connected.

Intercom integrated if installed.

2.2.11.2. All required access control hardware to include enclosures, power supplies, sensors, input, and output devices will be installed according to manufactures specifications, NEC, and NFPA guidelines.

2.2.11.3. All exterior doors will be monitored for position to indicate a notification on security desk for door force and door prop.

2.2.11.4. Genetec FIPS software required to read Military CAC cards will be installed and setup according to Genetec & ESS guidelines.

2.2.11.5. Server and workstations will be configured and setup to view access control information.

2.3. Burglar Alarm

2.3.1. Burglar alarm devices resistors and wiring is to be installed to alert central station in the event of a break-in.

2.3.2. Point Devices are to be mounted on all exterior doors, exterior overhead doors, doors that lead onto the roof, windows at or below ground level, and two 360’ PIRs in the buildings core. Please refer to drawings for locations.

2.3.3. Point devices that are monitoring the same doors as access control will use the other side of the DPST door switches. The same wiring can be used. For this the Green and White wire will be used for the Burglar Alarm and the Red and Black wire for the ACS. The wiring will then separate at the control panels and connect to the other system.

2.3.4. All point devices will be individual zones unless doors are grouped together.

2.3.5. All point devices will have their resistors installed at the device. NOT located at the panel termination point.

2.3.6. PIRs will have their tamper connected according to ESS guidelines.

2.3.7. Burglar device field wiring terminations shall be completed via solder and heat shrink when no terminal screw is present. Example when connecting field wiring to door contact wires must be stripped and connected via a hot solder joint and then covered with heat shrink. No twist or crimp mechanical connectors are permitted.

2.3.8. Resistors will be soldered in line at devices and covered in heat shrink tubing.

2.3.9. All burglar wiring shall have permeant written labels at each end to identify the door, zone number, terminating room.

2.3.10. The ELK control board, Keypads, Input & output cards will be provided by NYARNG ESS department. They will also preform final programing.

2.3.11. Two keypad locations are required at the entrances. Near DR-133 and near DR-ES15.

2.3.12. Control Panels

2.3.12.1. The Main Burglar control panel will be located in MDF RM-112.

2.3.12.2. The slave Burglar control panel will be located in Guard Booth RM-

133.

2.3.12.3. Panels will be connected to ACS control panel with a minimum of 1” conduit for integration.

2.3.13. All Burglar alarm point devices, control panels, keypads and notification devices will be installed and mounted according to manufactures specifications, NEC, and NFPA guidelines.

2.3.14. Burglar Alarm Acceptance of completion terms:

2.3.14.1. All point devices are wired and connected to a control zone.

2.3.14.2. All point devices have their resistor wired at the device junction.

2.3.14.3. All keypads are wired and mounted.

2.3.14.4. Control boards and slave boards are wired and connected.

2.3.14.5. Functional zone testing of each zone is labeled and completed.

2.4. Video Intercom

2.4.1. Aiphone Video Intercom IX-EA Door stations will be provided and installed at the following doors.

2.4.1.1. DR E132

2.4.1.2. DR 132

2.4.1.3. DR 134A

2.4.1.4. DR ES15

2.4.2. Door stations will be connected to the Genetec ACS system to release the door lock.

2.4.3. Door station network CAT6A will need to be installed as part of this contract.

2.4.4. Video intercom equipment will be IP’d and setup according to NYARNG ESS specifications.

2.4.5. Where card reader and intercom door station are co-located. A backing box same or like Pedestal Pro LANDO-SS-10X8-E will be used.

2.4.6. Mounting height of all Video Intercom door stations must comply with ADA regulation.

2.4.7. Eight Airphone Video Intercom Master Stations IX-IX-MV7-HB will be provided and installed in the following areas.

2.4.7.1. RM-133

2.4.7.2. RM-115

2.4.7.3. RM-110

2.4.7.4. RM-216

2.4.7.5. RM-256

2.4.7.6. RM-303

2.4.7.7. RM-403

2.4.7.8. RM-416

2.4.8. Master Station only. Master Station Data drop and network should already be installed during construction. Installation and programming will need to be provided by this contract.

2.4.9. Networking of Video Intercom equipment.

2.4.9.1. All switching and networking infrastructure is to be provided by

NYARNG or others. It will be comprised of Cisco Switches with Fiber interconnects. The provided network switches will have dedicated port space provided by NYARNG ESS POC. The provided switches are only capable of providing 15W of POE power. All devices that require more than 15W of POE will need an injector that is to be neatly mounted in the data rack.

2.4.9.2. Video Intercom network wiring is to be CAT6A in Gray color.

2.4.9.3. Network Power/battery backup in MDF & IDF shall be provided by others. Multi outlet power strips may be required for multi devices such as POE injectors.

2.4.9.4. Network IP address will be provided by NYARNG ESS POC.

2.4.10. Burglar Alarm Acceptance of completion terms:

2.4.10.1. All video intercom units are installed and wired in according to manufactures specifications, NEC and NFPA regulations.

2.4.10.2. All units are IP’d and programed to function as an integrated system with the ACS.

2.4.10.3. Functional testing of opening all selected doors from the system.

3. Site Information

3.1. Demonstrate operability with Site Point of Contact (POC).

3.2. Special Qualifications: The contractor shall ensure all employees possess all required certification, and licenses for climbing roof, installing Electronic Security equipment, operating electronics, operating test equipment, and utilizing safety equipment in the performance of this contract.

3.3. Worksite Cleanliness.

3.3.1. The Contractor shall remove any waste or debris after the work is complete. All materials shall be secured to prevent loose objects from blowing into adjacent areas. It is the responsibility to ensure all items are secure during construction.

3.3.2. The Contractor shall recycle to the greatest extent possible and dispose of all trash and debris into designated waste receptacles on site.

3.3.3. The Contractor shall bring any unforeseen project conditions to the attention of the Site Point of Contact (POC) immediately. Unexpected or differing site conditions, which may alter the scope of work, shall be approved by the Contracting Officer (KO) prior to such work being performed.

3.4. Installation Location:

3.4.1. Location for Delivery and Installation: NYS DMNA Jamaica Armory,93-05

168th St, Jamaica, NY 11433 Site Points of Contact (POC): Michael Rodriguez (914)-945-7532 / (518)-588-9859.

3.4.2. NYARNG ESS Program Point of Contact (POC): Jonathan Delano (518)- 786-6148.

3.4.3. The Contractor shall coordinate work dates and times with Site (POC) and shall obtain 48 hours prior approval of work schedule.

3.4.4. Due to current construction, work performed by this contract cannot start until March 4th, 2024, currently.

3.5. Worksite Safety and Occupational Health (SOH): For all on-site work, the contractor shall abide by safety rules and regulations of any governmental body having the authority to control the manner or method of carrying out the work.

Contractor shall be responsible directly to Occupational Safety and Health Administration (OSHA) or appropriate state office where OSHA has approved a state plan. The contractor shall:

3.5.1. Ensure the SOH of contractor's employees.

3.5.2. Ensure compliance with all applicable Federal, state, and local codes and standards.

3.5.3. Protect the public within the contract work area and protect government property.

3.5.4. Investigate all mishaps (including near miss) and provide report to the

COR.

3.5.5. Ensure all employees performing on-site work: comply with applicable

SOH requirements, wear prescribed personal protective equipment, report any unsafe or unhealthful conditions/activities, prevent avoidable mishaps, work in a safe manner, and report all mishaps (including near miss).

3.6. Installation Access and Security Requirements.

3.6.1. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05), and applicable installation, facility and area commander installation/facility access, and local security policies and procedures (provided by a Government representative).

3.6.2. Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

3.6.3. The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval from Site POC. All contractor employees shall carry proper identification with them at all times, and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

3.6.4. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the COR. The contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), Headquarters Department of Army (HQDA) and/or local policy (see PWS 6.0). Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

3.6.5. Identification of Contractor Employees: The contractor shall ensure that all employees engaged in tasks always occurring on Government installation wear company-designated uniforms, and display company identification badges at all times. The uniform shall have the company name prominently displayed.

4. Definitions and Acronyms:

4.1. Definitions:

4.1.1. Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

4.1.2. Physical Security: Actions that prevent the loss or damage of Government property.

4.1.3. Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

4.1.4. Quality Control: All necessary measures taken by the Contractor to ensure that the quality of a product or service shall meet contract requirements.

4.1.5. Subcontractor: One that enters a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

4.1.6. Perimeter IDS: Burglar alarm that protected the perimeter of a facility.

5. Acronyms:

AEI Army Enterprise Infostructure ACS Access Control System AR Army Regulation ARNG Army National Guard AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CAC Common Access Card CM Contract Manager COR Contracting Officer Representative CSTS Camp Smith Training Site DA Department of the Army DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense DSCA Defense Counterintelligence and Security Agency ELK Brand Name of Burglar Alarm panel being used ESS Electronic Security Systems FAR Federal Acquisition Regulation FIPS Federal Information Processing Standards GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IDF Intermediate Distribution Framework IDS Intrusion Detection System KO Contracting Officer MDF Main Data Framework NEC National Electric Code NFPA National Fire Protection Association NGB National Guard Bureau NYARNG New York Army Reserve National Guard OCI Organizational Conflict of Interest

OEM Original Equipment Manufacturer OSHA Occupational Safety and Health Administration POC Point of Contact QA Quality Assurance QC Quality Control SCR Service Contract Reporting SOH Safety and Occupational Health SOW Statement of Work

6. Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

The Government will NOT provide any property, material, equipment, and/or services for the purpose of performance under this contract.

6.1. Utilities: All utilities in the facility will be available for the contactor’s use in the performance of this contract. The contractor shall instruct employees in utilities conservation practices. The contractor shall operate under conditions that preclude the waste of utilities, which includes electricity and water.

7. Contractor Furnished Property, Materials, and Equipment (CFP/M/E): The contractor shall provide all the property, material, equipment, and services for the purpose of performance under this contract. Contractor shall be required to provide all test equipment, tools, safety gear, safety equipment, replacement parts, repair parts, subassemblies, and components for the on-site maintenance and repair services of SARSA Radar System described in Technical Exhibit (TE) 3.

7.1. The Government will reimburse contractor only for items resulting from alteration of equipment, reconfiguration of equipment, operator negligence, abuse, vandalism, theft, fire, and unusual atmospheric conditions. All parts, components, materials, and software licenses added to the radar system will become Government property after the contract ends.

7.2. General: Except for those items specifically stated to be Government-Furnished in Paragraph 1.3.3 or otherwise stated, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.0.

8. Applicable Publications: Publications applicable to this SOW are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory

Website

Federal Acquisition Regulation Mandatory https://www.acquisition.gov/?q=browsef ar

Defense Federal Acquisition Regulation Supplement

Mandatory http://www.acq.osd.mil/dpap/dars/dfarsp gi/current/index.html or https://www.acquisition.gov/dfars DoDI 5400.11

Department of Defense Privacy and Civil Liberties Programs

01/29/2019

Advisory https://www.esd.whs.mil/Portals/54/Doc uments/DD/issuances/dodi/540011p.pdf

AR 530-1

Operations Security 09/26/2014 Mandatory http://armypubs.army.mil/ProductMaps/

PubForm/AR.aspx

AR 525-13

Antiterrorism 12/09/2019 Mandatory http://armypubs.army.mil/ProductMaps/

PubForm/AR.aspx

7.1 Applicable Forms: Forms applicable to the SOW are listed below:

Form Date Website I-9

Employment Eligibility Verification 10/21/2019 https://www.uscis.gov/sites/default/files/files/form/i-

9.pdf

DD 441

Department of Defense Security

Agreement

Feb 2020 http://www.dtic.mil/whs/directives/forms/dd/ddforms00 01-0499.htm

DD 250

Material Inspection and Receiving

Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_049 9/

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each Genetec GSC-OM-S Omnicast License

FFP

Genetec GSC-OM-S Omnicast License FOB: Destination

VENDOR PART NR: GSC-OM-S

PURCHASE REQUEST NUMBER: 0011983871-0001

PSC CD: 5810

NET AMT

0002 25 Each Genetec GSC-OM-S-1C STD 1 Ch License

FFP

Genetec GSC-OM-S-1C STD 1 Ch License FOB: Destination

VENDOR PART NR: GSC-OM-S-1C

0003 1 Each Genetec ADV-STANDARD-5Y ADV Stand

FFP

Genetec ADV-STANDARD-5Y ADV Stand FOB: Destination

VENDOR PART NR: ADV-STANDARD-5Y

0004 1 Each Genetec GSC-SY-S Access Control Lic

FFP

Genetec GSC-SY-S Access Control Lic FOB: Destination

VENDOR PART NR: GSC-SY-S

0005 1 Each Genetec GSC-1SDK-CODEBENCH

FFP

Genetec GSC-1SDK-CODEBENCH FOB: Destination

VENDOR PART NR: GSC-1SDK-CODEBENCH

0006 1 Each Genetec HID Sy-PVC-FXRDR

FFP

Genetec HID Sy-PVC-FXRDR FOB: Destination VENDOR PART NR: Sy-PVC-FXRDR

0007 1 Each Genetec SY-PVC-BASE-27-00 Cert Manager

FFP

Genetec SY-PVC-BASE-27-00 Cert Manager FOB: Destination

VENDOR PART NR: SY-PVC-BASE-27-00

0008 1 Each Genetec SY-PVC-BASE-MS PIV-Software

FFP

Genetec SY-PVC-BASE-MS PIV-Software FOB: Destination

VENDOR PART NR: Y-PVC-BASE-MS

0009 1 Each Genetec R54270101-ELITE Enroll Reader

FFP

Genetec R54270101-ELITE Enroll Reader FOB: Destination

VENDOR PART NR: R54270101-ELITE

0010 1 Each Genetec SY-CLOUDLINK Controller

FFP

Genetec SY-CLOUDLINK Controller FOB: Destination

VENDOR PART NR: SY-CLOUDLINK

0011 3 Each Genetec SY-LP4502 Smart Controller

FFP

Genetec SY-LP4502 Smart Controller FOB: Destination

0012 4 Each Genetec SY-MR52-S3 Slave Board

FFP

Genetec SY-MR52-S3 Slave Board FOB: Destination

VENDOR PART NR: SY-MR52-S3

0013 8 Each Genetec SY-923PPPNEK000P4 Reader

FFP

Genetec SY-923PPPNEK000P4 Reader FOB: Destination

VENDOR PART NR: SY-923PPPNEK000P4

0014 2 Each Genetec SY-MR16IN-S3 16 Input

FFP

Genetec SY-MR16IN-S3 16 Input FOB: Destination

VENDOR PART NR: SY-MR16IN-S3

0015 1 Each Genetec SY-MR16OUT-S3 Output

FFP

Genetec SY-MR16OUT-S3 Output FOB: Destination

VENDOR PART NR: SY-MR16OUT-S3

0016 2 Each Genetec SY-DV16RD-E8M2 Enclosure

FFP

Genetec SY-DV16RD-E8M2 Enclosure FOB: Destination

VENDOR PART NR: SY-DV16RD-E8M2

0017 1 Each Altronix TM400

FFP

Altronix TM400 FOB: Destination

VENDOR PART NR: TM400

0018 8 Each Aiphone IX-MV7-HW Black

FFP

Aiphone IX-MV7-HW Black FOB: Destination

VENDOR PART NR: IX-MV7-HB

0019 4 Each Aiphone IX-EA Door Station

FFP

Aiphone IX-EA Door Station FOB: Destination

VENDOR PART NR: IX-EA

0020 4 Each PRO LANDO_SS-10X8E Enclosure

FFP

PRO LANDO_SS-10X8E Enclosure FOB: Destination

VENDOR PART NR: LANDO_SS-10X8E

0021 4 Each Genisis 21951099 Profusion 1000ft

FFP

Genisis 21951099 Profusion 1000ft FOB: Destination

VENDOR PART NR: 21951099

0022 10 Each Genisis 11041101 22AWG 4 Cond Wire

FFP

Genisis 11041101 22AWG 4 Cond Wire FOB: Destination

VENDOR PART NR: 11041101

0023 8 Each Genisis 12061109 22AWG 6 Cond Wire

FFP

Genisis 12061109 22AWG 6 Cond Wire FOB: Destination

VENDOR PART NR: 12061109

0024 10 Each CAT6A Plenum Wire 1000FT Gray Color

FFP

CAT6A Plenum Wire 1000FT Gray Color FOB: Destination VENDOR PART NR: Cat6A

0025 7 Each Bosch DS160 REX PIR

FFP

Bosch DS160 REX PIR FOB: Destination

VENDOR PART NR: DS160

0026 4 Each Fire-Lite MR-101/CR Relay

FFP

Fire-Lite MR-101/CR Relay FOB: Destination

VENDOR PART NR: MR-101/CR

0027 9 Each Axis 02218-001 P3727-PLE Camera

FFP

Axis 02218-001 P3727-PLE Camera FOB: Destination

VENDOR PART NR: 02218-001

PURCHASE REQUEST NUMBER: 0011983668

0028 10 Each Axis 02328-001 Q3265-LVE 9MM Camera

FFP

Axis 02328-001 Q3265-LVE 9MM Camera FOB: Destination

VENDOR PART NR: 02328-001

0029 1 Each Axis 01752-004 Q6075-E PTZ Camera

FFP

Axis 01752-004 Q6075-E PTZ Camera FOB: Destination

VENDOR PART NR: 01752-004

0030 1 Each Axis 01564-001 D2110-VE Security Radar

FFP

Axis 01564-001 D2110-VE Security Radar FOB: Destination

VENDOR PART NR: 01564-001

0031 6 Each Axis 5505-541 ACI Conduit Adapter 1/2"-3

FFP

Axis 5505-541 ACI Conduit Adapter 1/2"-3 FOB: Destination

VENDOR PART NR: 5505-541

0032 2 Each Axis 5505-641 Conduit Adapter 3/4" NPS

FFP

Axis 5505-641 Conduit Adapter 3/4" NPS FOB: Destination

VENDOR PART NR: 5505-641

0033 2 Each Axis 5801-121 Axis Bird Control Spike 10

FFP

Axis 5801-121 Axis Bird Control Spike 10 FOB: Destination

VENDOR PART NR: 5801-121

0034 3 Each Axis 5017-641 T91A64 Corner Bracket

FFP

Axis 5017-641 T91A64 Corner Bracket FOB: Destination

VENDOR PART NR: 5017-641

0035 7 Each Axis 5504-821 T91D62 1.5" Adapter

FFP

Axis 5504-821 T91D62 1.5" Adapter FOB: Destination

VENDOR PART NR: 5504-821

0036 1 Each Axis 5507-271 T91D64 Telescope Parapet M

FFP

Axis 5507-271 T91D64 Telescope Parapet M FOB: Destination

VENDOR PART NR: 5507-271

0037 1 Each Axis 5502-431 T94A01D Pendant Kit

FFP

Axis 5502-431 T94A01D Pendant Kit FOB: Destination

VENDOR PART NR: 5502-431

0038 8 Each Axis 01513-001 T94N01D Pendant Kit

FFP

Axis 01513-001 T94N01D Pendant Kit FOB: Destination

VENDOR PART NR: 01513-001

0039 8 Each Axis 02391-001TP3815-E Smoked Dome

FFP

Axis 02391-001TP3815-E Smoked Dome FOB: Destination

VENDOR PART NR: 02391-001

0040 1 Each Tripp-Lite B030-008-17-IP KVM

FFP

Tripp-Lite B030-008-17-IP KVM FOB: Destination

VENDOR PART NR: B030-008-17-IP

PURCHASE REQUEST NUMBER: 0011983875-0001

0041 2 Each 55" 4K Commercial CCTV Monitor

FFP

55" 4K Commercial CCTV Monitor FOB: Destination VENDOR PART NR: 55" 4k Video Monitor

0042 1 Each 43" 4K Commercial CCTV Monitor

FFP

43" 4K Commercial CCTV Monitor FOB: Destination VENDOR PART NR: 43" 4k Video Monitor

0043 3 Each Arm style TV mount for 55" TV

FFP

Arm style TV mount for 55" TV FOB: Destination VENDOR PART NR: 55" Rated TV Mount

0044 3 Each TAA compliant 1500W AVR UPS Batt Backu

FFP

TAA compliant 1500W AVR UPS Batt Backu FOB: Destination VENDOR PART NR: 1500Watt AVR UPS

0045 5 Each GRI 200-36HD Floor mounted contact

FFP

GRI 200-36HD Floor mounted contact FOB: Destination

VENDOR PART NR: 200-36HD

0046 20 Each FLAIR 1000-65V BMS DPST Door Contac

FFP

FLAIR 1000-65V BMS DPST Door Contac FOB: Destination

VENDOR PART NR: 1000-65V

0047 2 Each Bosch DS9370 PIR

FFP

Bosch DS9370 PIR FOB: Destination

VENDOR PART NR: DS9370

0048 2 Each Altronix TROVE2BL2

FFP

Altronix TROVE2BL2 FOB: Destination

VENDOR PART NR: TROVE2BL2

0049 2 Each Altronix MM24 Magnets

FFP

Altronix MM24 Magnets FOB: Destination

VENDOR PART NR: MM24

0050 1 Each Assorted Conduit / Hardware

FFP

Assorted Conduit / Hardware FOB: Destination VENDOR PART NR: Assorted

0051 1 Each Labor for complete install

FFP

Labor for complete install at Jamaica Armory, Queens NY.

FOB: Destination VENDOR PART NR: Labor

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government

0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government 0035 Destination Government Destination Government 0036 Destination Government Destination Government 0037 Destination Government Destination Government 0038 Destination Government Destination Government 0039 Destination Government Destination Government 0040 Destination Government Destination Government 0041 Destination Government Destination Government 0042 Destination Government Destination Government 0043 Destination Government Destination Government 0044 Destination Government Destination Government 0045 Destination Government Destination Government 0046 Destination Government Destination Government 0047 Destination Government Destination Government 0048 Destination Government Destination Government 0049 Destination Government Destination Government 0050 Destination Government Destination Government 0051 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 29-FEB-2024 1 HHB 258 FA

JONATHAN DELANO

93-05 168TH STREET

JAMAICA NY 11433

FOB: Destination

W56PPG

0002 29-FEB-2024 25 (SAME AS PREVIOUS LOCATION)

0003 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0004 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0005 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0006 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0007 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0008 29-FEB-2024 1 JFHQ-NY, ATTN: MNFE

LAURA B JACOBSON

330 OLD NISKAYUNA ROAD

LATHAM NY 12110

0009 29-FEB-2024 1 HHB 258 FA

JONATHAN DELANO

93-05 168TH STREET

JAMAICA NY 11433

0010 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0011 29-FEB-2024 3 (SAME AS PREVIOUS LOCATION)

0012 29-FEB-2024 4 (SAME AS PREVIOUS LOCATION)

0013 29-FEB-2024 8 (SAME AS PREVIOUS LOCATION)

0014 29-FEB-2024 2 JFHQ-NY, ATTN: MNFE

330 OLD NISKAYUNA ROAD

LATHAM NY 12110

0015 29-FEB-2024 1 HHB 258 FA

93-05 168TH STREET

JAMAICA NY 11433

0016 29-FEB-2024 2 (SAME AS PREVIOUS LOCATION)

0017 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0018 29-FEB-2024 8 (SAME AS PREVIOUS LOCATION)

0019 29-FEB-2024 4 (SAME AS PREVIOUS LOCATION)

0020 29-FEB-2024 4 (SAME AS PREVIOUS LOCATION)

0021 29-FEB-2024 4 JFHQ-NY, ATTN: MNFE

330 OLD NISKAYUNA ROAD

LATHAM NY 12110

0022 29-FEB-2024 10 HHB 258 FA

93-05 168TH STREET

JAMAICA NY 11433

0023 29-FEB-2024 8 (SAME AS PREVIOUS LOCATION)

0024 29-FEB-2024 10 (SAME AS PREVIOUS LOCATION)

0025 29-FEB-2024 7 (SAME AS PREVIOUS LOCATION)

0026 29-FEB-2024 4 (SAME AS PREVIOUS LOCATION)

0027 29-FEB-2024 9 (SAME AS PREVIOUS LOCATION)

0028 29-FEB-2024 10 (SAME AS PREVIOUS LOCATION)

0029 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0030 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0031 29-FEB-2024 6 (SAME AS PREVIOUS LOCATION)

0032 29-FEB-2024 2 (SAME AS PREVIOUS LOCATION)

0033 29-FEB-2024 2 (SAME AS PREVIOUS LOCATION)

0034 29-FEB-2024 3 JFHQ-NY, ATTN: MNFE

330 OLD NISKAYUNA ROAD

LATHAM NY 12110

0035 29-FEB-2024 7 HHB 258 FA

93-05 168TH STREET

JAMAICA NY 11433

0036 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0037 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0038 29-FEB-2024 8 (SAME AS PREVIOUS LOCATION)

0039 29-FEB-2024 8 (SAME AS PREVIOUS LOCATION)

0040 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0041 29-FEB-2024 2 (SAME AS PREVIOUS LOCATION)

0042 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0043 29-FEB-2024 3 (SAME AS PREVIOUS LOCATION)

0044 29-FEB-2024 3 (SAME AS PREVIOUS LOCATION)

0045 29-FEB-2024 5 (SAME AS PREVIOUS LOCATION)

0046 29-FEB-2024 20 (SAME AS PREVIOUS LOCATION)

0047 29-FEB-2024 2 JFHQ-NY, ATTN: MNFE

330 OLD NISKAYUNA ROAD

LATHAM NY 12110

0048 29-FEB-2024 2 HHB 258 FA

93-05 168TH STREET

JAMAICA NY 11433

0049 29-FEB-2024 2 (SAME AS PREVIOUS LOCATION)

0050 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

0051 29-FEB-2024 1 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-10 Reporting Executive Compensation and First-Tier

Subcontract Awards

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-22 Alternative Line Item Proposal JAN 2017 52.204-23 Prohibition on Contracting for Hardware, Software, and

Services Developed or Provided by Kaspersky Lab and Other Covered Entities

NOV 2021

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.204-27 Prohibition on a ByteDance Covered Application JUN 2023 52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for Debarment

NOV 2021

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.211-17 Delivery of Excess Quantities SEP 1989 52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

MAR 2023

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

DEC 2022

52.213-2 Invoices APR 1984 52.219-6 Notice Of Total Small Business Set-Aside NOV 2020 52.219-14 (Dev) Limitations on Subcontracting (DEVIATION 2021-O0008) FEB 2023 52.219-16 Liquidated Damages-Subcontracting Plan SEP 2021 52.222-3 Convict Labor JUN 2003 52.222-19 (Dev) Child Labor - Cooperation with Authorities and Remedies

(DEVIATION 2020-O0019)

DEC 2022

52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-35 Equal Opportunity for Veterans JUN 2020 52.222-37…