F2 - Checklist_CFLD.2.Security.Fence.pdf

Quality Confirmation Checklist

Requirements for the 8’ fixed position commercial grade security fence:

☐ Was the new security fence on site prior to removal of the old security fence?

☐ Is the new security fence 8’ tall?

☐ Are the new removable security fence panels constructed as per the SOW?

☐ Stretched tight with tension bars and tension bar bands?

☐ Cope cut and welded?

☐ Horizontal center rail and vertical center post?

☐ 11-gage aluminum fence ties?

☐ Is the new 8’ Commercial Grade Security Fence installed in the new specified location?

☐ Are the Terminal Posts and Gate Posts a minimum of 3” SF40 Premium Commercial Grade Galvanized?

☐ Are the posts in the ground with concrete?

☐ Are all posts plumb in 360-degrees, in a straight line, and at uniform height?

☐ Are line posts Installed no more than ten feet (10’) apart?

☐ Are all permanent 8’ fence posts to the bottom of both stairways capped with Angled 3-Strand Barb Wire Arm/Caps?

☐ Are all Angled 3-Strand Barb Wire Arm/Caps secured with galvanized screws from the inside of the esplanade?

☐ Is a top rail and center rail installed?

☐ Is the top rail and center rail straight and level?

☐ Is the new 8’ security fence galvanized commercial grade with 9-gage chain link 2” wire mesh and angled, 3-strand galvanized barb wire top?

☐ Is the bottom of the chain link 2” wire mesh fabric is tight to the ground and top of the esplanade wall?

☐ Is the new wire mesh fence fabric tight and secured with tension bars and tension bar bands?

☐ Is the new wire mesh fence fabric fastened to all horizontal rails and all posts with 11-gage aluminum fence ties every 24-inches?

☐ Is 9-gauge tension wire installed no higher than 4-inches from the bottom of the chain link 2” wire mesh fabric?

☐ Is the bottom of the chain link 2” wire mesh fence fabric secured using galvanized hog-rings every 12-inches (~fourth link) to the tightly stretched and secured 9-gauge chain link fence tension wire?

☐ Are there no gaps in the fence greater than 2”?

☐ Are all the fence posts capped?

Quality Confirmation Checklist

Requirements for the 6’ removable commercial grade security fence panels:

☐ Are the esplanade wall post brackets a larger section of galvanized pipe/fence post with an inside diameter (equal to or slightly larger the outside diameter of the removable fence post) sufficient to the removable fence posts?

☐ Are the esplanade wall post brackets installed with a minimum of 2 bolts?

☐ Are all the esplanade wall post brackets installed with the top bolt on each bracket fastened through the center of each post bracket at a uniform height?

☐ Do the 2”x 8’ posts fit securely in the post brackets without falling through to the river?

☐ Do the 2”x 8’ posts look plumb and level?

☐ Do the 2”x 8’ posts overlap the esplanade wall 24-inches?

☐ Are the new commercial grade security fence panels installed starting inland at the corner of the 8’ fence?

☐ Are all the fence posts capped?

☐ Are all the removable fence post caps fastened with galvanized screws?

☐ Are all the esplanade wall post brackets spaced starting from the 8’ fixed position commercial grade Security Fence so that two (2) removable fence panels are secured to each removable post with a minimum of two (2) stainless steel hose clamps?

☐ Are there no gaps in the fence greater than 2”?

☐ Are two removable fence panels utilized to replace the double swing drive gates on the driveway to the esplanade?

☐ Are two removable fence panels utilized to replace the double swing drive gates installed with minimal ground clearance and typical closure mechanisms?