W912PM-18-R-0048_AV_System_Amendment_07_RFI_Responses_and_SCA_Wage_Determination.pdf

W912PM18R0048

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to:

1) Provide government responses to RFI 's submitted by industry.

2) Incorporate AV710, AV115, AV123 and AV125 as attachments to accompany the RFI responses.

3) Incorporate the Service Contract Act Wage Determination for the project.

4) Incorporate FAR 52.222-41 Service Contract Labor Standards

5) Amend the Submission of Offer Instructions to include verbiage requiring all proposals remain valid for a period of 90 days after proposal due date.

All other provision of the solicitaiton remain unchanged.

//////////////////////////////////////////////////////LAST ITEM///////////////////////////////////////////////////////

1. CONTRACT ID CODE PAGE OF PAGES

J 1 23

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 13-Dec-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912PM18R0048

X 9B. DATED (SEE ITEM 11)

29-Sep-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

13-Dec-2018

CODE

U S ARMY CORPS OF ENGINEERS, WILMINGTON

WILMINGTON DISTRICT

ATTN: CONTRACTING DIVISION

69 DARLINGTON AVE

WILMINGTON NC 28403-1343

W912PM 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been added by reference:

52.222-41

The following have been added by full text:

RFI RESPONSES

RFI’s PN80773 – Audio Visual System

Q1. The drawings (AV601) is for Conference rooms without VTC. I don't see any listed in the room pages (AV114‐ AV125). Are there any? (Response: All conference rooms have VTC)

Q2. The drawing (AV602) shows a 7" touch panel for room scheduling for the Conference rooms with VTC. Room G114 (drawings AV115 ‐ upper left) doesn't have one showing on the drawings. Oversight? (Response: The RSM should be added to G114 (refer to amended sheet AV115))

Q3. I am assuming that Room F222 (drawing AV124) is the Command Conference room as it has a 3‐Bay credenza.

The drawings for the rooms do not state Command Conference Room. Since this Conference room is near the CO, XO and 1Sgt's office, am I assuming correctly? (Response: Command Conference Room is G213, on Sheet AV125)

Q4. On Page 3 of Section 27 40 00 under Qualifications.

What qualifications are being requested/required by the AV contractor, installer, and Manufacturer qualifications?

(Response: The company and installer must be certified by the manufacturer to install equipment/devices used, Firm information, past projects, proposed system information)

Are certifications need to be submitted with our proposal (Response: Yes)

Q5. On Page 5 of Section 27 40 00 under sub‐section 2.4.2

It states wither tilting or articulating mounts for the 60". The drawings don't show displays on any of the walls, so how are we to know which room gets what mounting hardware? (Response: Locations are on the drawings)

Q6. On Page 7 of Section 27 40 00 under sub‐section 2.4.9.

It calls for a codec NIPR, SIPR and JWIC network, but none of the drawings show a JWIC codec. Is one required?

(Response: JWIC is not required)

Q7. On Page 7 of Section 27 40 00 under sub‐section 2.4.16.

For the touch panel control panel that is stated within this section states that provide appropriate lectern, table or wall mounting accessory as required. Looking at all the specifications it seems that the requested touch panel all need a docking station for all of the locations. Does the lectern touch panel need to be imbedded within the lectern top (needs clarifications please)? (Response: Using the manufacture mount is acceptable)

Q8. On Page 11 of Section 27 40 00 under sub‐section 3.2.1.

It states that racks should be mounted to the wall. There are no racks except those within the podium and credenza. I am assuming that there are no racks to be mounted as those that are specified have wheels?

(Response: No wall‐mounted racks are required)

Q9. For requested credenza and lectern, what wood kit is needed for each of these products? (Response:

Coordinate finish selections with Architect)

Q10. The Room scheduling device. Will this operate on Office 365 or the Crestron Fusion system? (Response:

Room schedulers shall be on the Crestron system. Any integrations shall be coordinated with the user)

Q11. We are assuming that for the touch panel and room scheduling device can not have camera built‐in.

Correct? (Response: Built‐in cameras are not permitted)

Q12. Page 6 of Section 27 40 00 sub‐section 2.4.9 VTC. Drawings only show SIPR and NIPR VTC Systems. Where will the JWIC network be within this project? (Response: JWICS connection is not required for this project)

Q13. Page 11 of Section 27 40 00 sub‐section 3.2.1 Equipment Racks. It is being specified that all racks be mounted to the wall. There are no wall mounted racks on any of the drawings. Is this correct? (Response: There are no wall‐mounted racks on the project)

Q14. Room types (Conference Room ‐ no VTC). None are listed. Is this type room needing to be quoted since all conference rooms show VTC? (Response: All conference rooms have VTC)

Q15. Floor Plan AV115 does not show Room Status Monitor (RSM) outside G114, while similar room G104 shows one. Three classrooms (F102, F203 & F220) and the combinable classroom also show no RSMs, is this correct?

(Response: G114 will need a RSM and is currently roughed in. The classrooms do not have RSMs)

Q16. Rack Elevation drawing AV710‐5 shows a Middle Atlantic Shelf System in one of the bays for the command conference room. The drawing shows a C5‐SH‐SYS31 and SYS32, there is no SYS31 and the SYS32 model is a full bay system, not the quarter rack the drawing shows. The front rack rails are removed for the wooden shelf system, therefore the two blank panels and an amplifier will not be able to be mounted there. What is the purpose of the shelf system that regular rack shelves could not accomplish? (Response: The SYS32 is a typo, but the SYS31 is available from Middle Atlantic. It was intended to be installed as storage unit, however the space filled dup with equipment. The SYS31 is not to be installed due to other equipment requiring the space. (Refer to amended Sheet

AV710))

Q17. On Drawing AV123, Conference Room D202 shows a callout for drawing 1/AV601, but this is the Riser Diagram and doesn’t reflect the Monitor types as the other rooms do. Six similar rooms call out drawing 1/702 for 60” monitors, is this correct? (Response: Correct, the callout should be for 1/AV702 (Refer to amended Sheet

AV123)

Q18. On Drawing AV125, combinable classroom (G225 & G229), the rack elevation for the room is called out three times (1/AV710) the rack is in the rear of the room. Podiums are shown on the AV Signal Flow on Drawing AV604, are these podiums already in place or should the contractor provide these, similar to 2/AV710? (Response: There should be one rack controlling the combinable classroom, located in the back and reference to 1/AV710. The other two podiums should house AV inputs and the touchscreen controller only. These podiums will not have any additional AV equipment mounted within them. (Refer to amended Sheet AV125)

Q19. What is the current type of Table top AV Connectivity Boxes in the conference rooms? All conference room floor plans show 4 Cable Boxes (CB) in each room, yet the signal Flow diagrams show only two. What is the correct number and type of signals expected from the table boxes? Do any of the current boxes need upgrading to add for instance USB Power jacks? (Response: There are two sets of inputs on each side of the table (detail on Sheet AV502) to allow for NIPR and SIPR separation. The Architect and Electrical Engineer shall be consulted regarding changing the power connections)

Q20.Will the FSR floor boxes be provided and installed by the government with the appropriate AV connection plates? (Response: Floor boxes have been installed. Installer to provide connection plates)

Q21. Will the FSR Table Cubby Boxes be provided and installed by the government with the appropriate AV connections? (Response: Bidder will be responsible for cubby boxes. FSR box configuration and shall be coordinated with Electrical Engineer)

Q22. Where there is a recessed box for the camera, will it be provided and installed by the government?

(Response: Recessed box has already been provided)

Q23. Will 65” Displays be acceptable instead of 60”? (Response: This is acceptable and should be noted as a design deviation) Q24. For displays, all room display specifications are linked with AV702, Section one for 60” displays, however, there are 70”, 80”, and 90” displays also on Sheet ID AV702. Can the customer clarify which display sizes are to be installed in the room or if the 60” display details are correct for all rooms in the scope? (Response: Display sizes are identified on the AV riser sheets (600 series)) Q25. Will Tilt Wall mounts be acceptable for all room displays? (Response: Tilt mounts are acceptable) Q26. The room drawings does not have any microphones included. Where and what microphones (ceiling, gooseneck, or table) are required for the conference rooms and classrooms? Only Conference Room D202 shows a Signal Flow diagram that includes Shure Tri-Element microphones on the table. Please advise of other microphones desired in each room. (Response: Refer to the AV riser sheets (600 series)) Q27. Only S-3 Conference Room, Conference Room G114, and Command Conference Room G213 shows rack elevation drawings that include Cisco SX80 NIPR and SIPR codecs, however while attending the site visit, the customer spoke of codecs being provisioned for each room in scope. Additionally, several rooms include VTC details but does not include codecs loaded into the rack elevation drawing specified for those rooms. Please clarify which rooms shall have SX80 dual class or individual VTC systems. Also, if the customer plans to use existing VTC systems for the rooms in question? (Response: Refer to Plans and Specifications, not information relayed at the site visit)

Q28. Divisible Classrooms G225 and G226 includes conflicting information about whether a podium or rack will be required. Please clarify if the front of room enclosures should be LS-TURFR-WS23 podiums instead of RFR- 2428BR Series Racks? (Response: Equipment shall be mounted within the rack located in G225. Refer to amended Sheet AV125) Q29. What control commands shall be authored for the Crestron Touch Panels in the design? (Response:

Coordinate control requirements with the User) Q30. Does the customer have specifics on the desired configurations and finishes of the Middle Atlantic Podiums, Telecommunication Racks, and 3 Bay Credenzas? (Response: Coordinate control requirements with the User) Q31. For several Conference Rooms the TSP Touch Panel detail points to 04 keynote legend notes that “Audiovisual Equipment Mounted within Lecterns”. It is assumed that all touch panels will be mounted on the conference tables, however, is there a lectern missing from the design and should be incorporated? (Response: No, the touchscreen panels in the Conference Rooms are to be table mounted)

Q32. What is the intention of both Presentation Switchers and 8x4 Matrix Switchers and in several rooms?

(Response: This is to allow for the switching of either NIPR or SIPR VTC) Q33. Are UPS’s required for system operation continuity in the event of outage? (Response: No) Q34. Would the customer desire to have digital display signs to display NIPR or SIPR room statuses for situational awareness purposes? (Response: This is the purpose of the Room Status Monitors shown in the plans.)

Q35. Any requirements for Audio Conferencing? (Response: Refer to the AV riser sheets (600 series)) Q36. Does the customer require Service Level Agreements, Multisite Licenses and ISDN Links for the VTC Systems? (Response: This will not need to be provided by the AV vendor) Q37. What are the advanced system warranty requirements of the awarded contractor? Single year or multi year and level of service expectations? (Response: The Scope of Works requires that The contractor shall provide a minimum of one (1) year warranty on all materials and workmanship from the date of the Government’s acceptance of the work.)

Q38. Is there a Head End for the VTC and Video in the System? (Refer to the AV riser sheets (600 series)) Q39. Do the rooms interconnect at all? (Response: Rooms shall be standalone) Q40. . Reference: AV Specifications, 1.2 System Description: “The AV systems includes, but is not limited to, the following systems; sound reinforcement, microphones …” (p. 2).

Q41. How many microphones are required for each VTC/conference room? (Response: Refer to AV riser sheets (600 series)) Q42. Does the installation require microphones on the tables in the classrooms? (Response: Refer to AV riser sheets (600 series)) Q43. Reference: AV Specifications, 2.4 System Components and Products (pp. 5-11).

Q44. : If the contractor can provide cost savings by proposing an installation other than the Extron/Crestron solution outlined here, would the Government consider a cost proposal for VTC capability in the classrooms? (Response: No, please refer to the requirements in the specifications) Q45. Reference: AV Specifications, 2.4 System Components and Products (pp. 5-11).

Q46. Would the Government consider a solution that entails additional cameras on the rear wall of the classrooms, in order to project/distribute training briefs across the network? (Response: The design intent is for each room to be standalone) Q47. Reference: AV Specifications, 2.4 System Components and Products (pp. 5-11); Schematic Drawings (pp. 14- 29).

Q48. If the existing conduit proves inadequate for category and AV cables, does the Government intend to dictate the method of installing auxiliary conduit – either external to the finished drywall or reworked for conduit internal to the finished walls? That is, will the current electrical contractor install additional conduit, or will the winning contractor be responsible for that modification? (Response: No additional conduit should be required. If found to a be a differing site condition a MOD would be issued to AV bidder) Q49. Have the existing network drops been tested and certified? If not, will the contractor be held liable if a failure in the existing network cabling prevents proper equipment operations? (Response: Network drops will have been certified) Q50. Reference: AV System 1449, Submission of Offer (p. 7); Evaluation – Commercial Items (pp. 12-13).

Discussion: The information provided in these sections provides little guidance to the offeror in terms of what is expected in terms of proposal content, beyond the general categories of Price, Technical and Past Performance, and the broad statement “what is specified in the SOW.”

Question: In order to ensure compliance with solicitation requirements and consistency among proposals from all offerors, could the Government please provide an outline of expected proposal content? (Response: Proposal will demonstrate that vendor has performed this type of work in the past on similar projects and that it has the necessary certifications and expertise to install the required equipment) Q51.In the RFP on section 2.4.15 it is mentioned that the V-Brick system will be located at the display devices but in the drawings AV710 it says the V-Brick systems will be located in the equipment rack. Please clarify where they will be located? (Response: The design indicates the devices will be located in the equipment racks) Q52. The drawings call for ceiling mounted microphones the Floor Plans but the AV-Specifications document sections 2.4.23 and 2.4.24 call for either tabletop microphones or gooseneck microphones. Please clarify if ceiling hanging mounted microphones or table top microphones will be required or be proposed as an option? (Response:

The drawings do not indicate ceiling-mounted microphones) Q53.Will the cable cubbies be GFE or will the vendor be responsible for providing? (Response: The vendor will be responsible)

Q54. Is it the vendors responsibility to install the cable cubbies in the GFE conference table? (Response: The vendor will be responsible) Q55. Would it be possible to get a one week extension? (Response: See amendments for current bid due date) Q56. What is the estimated construction cost? (Response: This information is not applicable to the Audio Visual bid)

Q57. Can I get a copy of the planholders list, if available? (Response: Not Available)

Q58. What is the address (site location)? (Response: Building X‐3973, 5235 Urban Freedom Way, Fort Bragg, NC 28310)

Q59. Will the electrical contractor provide and install conduit and backboxes for AV related infrastructure (i.e. such as AV Conduit and Box for VTC Camera illustrated on drawing AV702, Detail 1)? (Response: Yes, electrical contractor to provide conduit an back boxes)

Q60. Will the general contractor or delegate provide the wood blocking inside the studs (as illustrated on drawing AV702, Detail 1)? (Response: The General Contractor shall provide the blocking)

Q61. Specification 2.4.1 indicates the AV contractor should provide a tilting wall mount for the flat panel display.

(Response: This is correct)

Q62. Drawing AV502, detail 1 indicates locations of table cut out locations for table microphones and cubby table boxes. Will the table vendor provide the table with these holes pre‐cut, or shall the AV vendor provide labor and tools to make the cut outs in the table? (Response: The AV Vendor shall provide and coordinate with electrical engineer on configuration)

Q63. Drawing AV502, detail 1 indicates a FSR T6-SQBLK table box will be installed in the table. The part number specified is just a table box frame, and does not specify any internal components (such as electrical outlet brackets, or cable connector brackets). Will these table boxes be provided by others, or should the AV vendor provide the table boxes with any required internal components (such as electrical outlets and/or cable connector brackets)? (Response: The AV Vendor shall provide) Q64. Drawing AV601 shows multiple FSR FL‐500P floor boxes under the table. Will these devices be provided and installed by the General and/or Electrical contractor? (Response: Floor boxes are installed. AV vendor is responsible for the trim rings and connections to AV Box)

Q65. Please be more specific and provide detailed information about the warranty/maintence expectations (Response: The Scope of Works requires that The contractor shall provide a minimum of one (1) year warranty on all materials and workmanship from the date of the Government’s acceptance of the work.)

Q66. Are we to provide the floorboxes, FSR FL‐500P? (Response: No, Vendor to provide Plates and connectors only)

Q67. If we do provide floor boxes, do we need to provide the plates and/or connectors for disconnection? Or just pass through? (Response: Plates and connectors only, the floor boxes are installed)

Q68. As far as room counts, how many conference rooms without VTC? How many conference rooms with VTC (not including CCR)? (Response: Refer to the plans they are labeled accurately.)

Q69. Only 1 command conference room? Which room is the CCR? (Response: Room G123 is the Command Conference Room)

Q70. Is “or equal” acceptable, specifically Crestron replacing Extron? (Response: Crestron is acceptable)

Q71. In the drawings, on the rack elevations, it shows an elevation for a conference room with no VTC. Looking at the room layouts, all conference rooms have vtc. Please confirm all 10 conference rooms will have VTC.

(Response: Incorrect. Many rooms have future provisions (boxes, conduit) for VTC without the equipment being installed.)

Q72. Is this solicitation a Lowest Price Technically Acceptable (LPTA) or best value? (Response: Lowest Price Technically Acceptable) Q73. How many past performance questionnaires are preferred? (Response: Please refer to page 13 of the Solicitation Document) Q74. Can a vendor submit more than one offer package?? (i.e. one may be the design as provided, the other may be a recommended working configuration using the design as more of a description of functionality). (Response: No) Q75. Specification document references JWICS VTC units, but none are listed on the drawing set with example room signal flows. (Response: JWICS is not required for this project) Q76. Is there a reason for cascaded video switches (one switch connected to another switch) on the conference spaces with NIPR & SIPR VTC?? (Response: This is to ensure network isolation from the AV equipment.)

Q77. Has the example signal flow been approved by the local Information Assurance team?? From our experience there are some flows that typically are not approved methodologies:

a. Some examples, but now all of them:

i. SIPR/NIPR equipment with no space separation or physical separation between

ii. Security in depth -> the control system is the single item that is keeping Red/Black separation, typically its preferred to have at least a “double fault” (meaning there is a failure of more than one security process) before there is a risk of data spillage from one classification to another (Response: All systems are separate)

Q78. What is the expectation for warranty after sign off?? Is there a desire to have a service/maintenance effort attached to the first year?? If so is there a security requirement ? if so will a DD254 be issued as part of this effort?

((Response: The contractor shall provide a minimum of one (1) year warranty on all materials and workmanship from the date of the Government’s acceptance of the work. No service/maintenance effort is desired after the first year.)

Q79. With this being new construction, is the current construction schedule available?? When is the building going to be turned over to a point where equipment can be installed? Typically, construction schedules move to the right… is this project looking to move to the right as well? (Response: General construction to be done by 31 January 2019.

Joint occupancy can occur between vendors) Q80. Is this going to be a planned modification to the General Contractor?? Or will the selected A/C contractor work directly for the ACOE? (Response: The AV vendor will work directly with USACE) Q81. In the plan drawings, some rooms have RSM panels outside while others don’t. AV Drawings show all room types with RSM panels. Please clarify which rooms under this scope should have Room Scheduling panels?

(Response: All Conference Rooms shall have Room Status Monitors) Q82. Please clarify which Cisco licenses, if any, the client wishes to be provided by the AV integrator. (Response:

To be coordinated with the User) Q83. Several rooms, such as G128, specify non-VTC equipment racks but still have a “VTC” marking at the display location. In these instances, please clarify whether VTC functionality is desired. (Response: The junction box indicated future VTC capability) Q84. Conference Room systems show two tabletop connectivity boxes per room in the AV drawings, but four are shown in the plan drawings. Please clarify how many connectivity boxes (thus table inputs) are desired per room.

(Response: The AV Plan drawings are correct) Q85. Please clarify whether procurement and/or installation of metal FSR floor boxes is under the AV contract, or if the AV contractor can expect these floor boxes to be in place and ready for cabling? (Response: AV contractor to install trim rings and connectors) Q86. Please correct AV drawing labels on pages AV602, AV603, and AV604. (Response: User to provide labeling scheme) Q87. Please add AV drawing labels to plan drawings. (Response: User to provide labeling scheme) Q88. Who will provide the cut-in table or podium-top boxes with the HDMI and VGA connection points?

(Response: The AV vendor will provide)

Q89. What kind of HDMI/VGA inputs will be on the podium?(Response: Refer to AV riser diagrams (600 series))

Q90. No specific quantity of Cisco touch panels has been requested. Does each system get one, or do we use one to configure? (Response: Each system gets one)

Q91. It is difficult to determine which rooms are which. For example, which rooms are designated as Command CR with VTC, as opposed to just Conference rooms with VTC? This is a significant distinction, since one type requires a credenza and the other a stand-up rack. Could the Government please label the illustrations clearly? (Response:

Rooms are identifiable by following the drawing legend)

Q92. In the combined rooms, what triggers the combination or separation? Is it automatic or manual? (Response: A control programmed into the touchscreen controller shall trigger the combination)

Q93. Do the rooms that require cameras need a J-box? Are there boxes already installed in the wall? (Response: The boxes are already installed)

Q94. When will network feeds be live in the building so that AV systems and IPTV STB can be tested? (Response:

Not Applicable)

SCA WAGE DETERMINATION

WD 15-4393 (Rev.-8) was first posted on www.wdol.gov on 07/10/2018

********* REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF

LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.:

2015-4393 Daniel W. Simms Division of | Revision No.:

Director Wage Determinations| Date Of Revision: 07/03/2018 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts

State: North Carolina

Area: North Carolina Counties of Franklin, Wake

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE -

TITLE FOOTNOTE

RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 15.56 01012 - Accounting Clerk II 17.47 01013 - Accounting Clerk III 19.55 01020 - Administrative Assistant 23.64 01035 - Court Reporter 17.41 01041 - Customer Service Representative I 12.11 01042 - Customer Service Representative II 13.62 01043 - Customer Service Representative III 14.86 01051 - Data Entry Operator I 14.78 01052 - Data Entry Operator II 16.12 01060 - Dispatcher, Motor Vehicle 17.90 01070 - Document Preparation Clerk 13.87 01090 - Duplicating Machine Operator 13.87 01111 - General Clerk I 13.27 01112 - General Clerk II 14.48 01113 - General Clerk III 16.26 01120 - Housing Referral Assistant 19.41 01141 - Messenger Courier 14.37 01191 - Order Clerk I 16.00 01192 - Order Clerk II 17.45 01261 - Personnel Assistant (Employment) I 16.52 01262 - Personnel Assistant (Employment) II 18.48 01263 - Personnel Assistant (Employment) III 20.43 01270 - Production Control Clerk 20.82 01290 - Rental Clerk 14.98 01300 - Scheduler, Maintenance 15.56 01311 - Secretary I 15.56 01312 - Secretary II 17.41 01313 - Secretary III 19.41 01320 - Service Order Dispatcher 16.49 01410 - Supply Technician 23.64 01420 - Survey Worker 15.07 01460 - Switchboard Operator/Receptionist 13.46 01531 - Travel Clerk I 12.86 01532 - Travel Clerk II 13.63 01533 - Travel Clerk III 14.49 01611 - Word Processor I 14.46 01612 - Word Processor II 16.23 01613

05000 -

- Word Processor III Automotive Service Occupations

18.22

05005 - Automobile Body Repairer, Fiberglass 21.95 05010 - Automotive Electrician 19.13 05040 - Automotive Glass Installer 18.02 05070 - Automotive Worker 18.23 05110 - Mobile Equipment Servicer 16.60 05130 - Motor Equipment Metal Mechanic 20.22 05160 - Motor Equipment Metal Worker 18.23 05190 - Motor Vehicle Mechanic 20.65 05220 - Motor Vehicle Mechanic Helper 15.03

05250 - Motor Vehicle Upholstery Worker 17.24 05280 - Motor Vehicle Wrecker 18.23 05310 - Painter, Automotive 19.13 05340 - Radiator Repair Specialist 18.23 05370 - Tire Repairer 12.85 05400 - Transmission Repair Specialist 20.24

07000 - Food Preparation And Service Occupations 07010 - Baker 13.49 07041 - Cook I 12.38 07042 - Cook II 13.97 07070 - Dishwasher 9.13 07130 - Food Service Worker 10.40 07210 - Meat Cutter 15.53 07260 - Waiter/Waitress 9.46

09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 16.62 09040 - Furniture Handler 11.26 09080 - Furniture Refinisher 16.62 09090 - Furniture Refinisher Helper 13.06 09110 - Furniture Repairer, Minor 15.13 09130 - Upholsterer 17.41

11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 10.18 11060 - Elevator Operator 10.18 11090 - Gardener 17.45 11122 - Housekeeping Aide 10.87 11150 - Janitor 10.87 11210 - Laborer, Grounds Maintenance 13.95 11240 - Maid or Houseman 9.75 11260 - Pruner 12.83 11270 - Tractor Operator 16.31 11330 - Trail Maintenance Worker 13.95 11360 - Window Cleaner 11.82

12000 - Health Occupations 12010 - Ambulance Driver 16.80 12011 - Breath Alcohol Technician 18.48 12012 - Certified Occupational Therapist Assistant 30.07 12015 - Certified Physical Therapist Assistant 28.55 12020 - Dental Assistant 21.60 12025 - Dental Hygienist 34.91 12030 - EKG Technician 31.98 12035 - Electroneurodiagnostic Technologist 31.98 12040 - Emergency Medical Technician 16.80 12071 - Licensed Practical Nurse I 17.41 12072 - Licensed Practical Nurse II 19.48 12073 - Licensed Practical Nurse III 21.71 12100 - Medical Assistant 15.81 12130 - Medical Laboratory Technician 21.29 12160 - Medical Record Clerk 15.41 12190 - Medical Record Technician 17.04 12195 - Medical Transcriptionist 16.21 12210 - Nuclear Medicine Technologist 32.72 12221 - Nursing Assistant I 11.62 12222 - Nursing Assistant II 13.07 12223 - Nursing Assistant III 14.26 12224 - Nursing Assistant IV 16.01 12235 - Optical Dispenser 22.35 12236 - Optical Technician 17.41 12250 - Pharmacy Technician 14.75 12280 - Phlebotomist 16.63 12305 - Radiologic Technologist 30.51 12311 - Registered Nurse I 24.78 12312 - Registered Nurse II 30.32 12313 - Registered Nurse II, Specialist 30.32 12314 - Registered Nurse III 36.68 12315 - Registered Nurse III, Anesthetist 36.68 12316 - Registered Nurse IV 43.96 12317 - Scheduler (Drug and Alcohol Testing) 22.88 12320 - Substance Abuse Treatment Counselor 23.62

13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.44 13012 - Exhibits Specialist II 26.54 13013 - Exhibits Specialist III 32.52 13041 - Illustrator I 20.42 13042 - Illustrator II 25.28 13043 - Illustrator III 30.94 13047 - Librarian 26.63 13050 - Library Aide/Clerk 12.41 13054 - Library Information Technology Systems 24.04 Administrator 13058 - Library Technician 18.13

13061 - Media Specialist I 17.36 13062 - Media Specialist II 19.41 13063 - Media Specialist III 21.63 13071 - Photographer I 16.52 13072 - Photographer II 18.48 13073 - Photographer III 22.23 13074 - Photographer IV 28.00 13075 - Photographer V 33.87 13090 - Technical Order Library Clerk 15.97 13110 - Video Teleconference Technician 20.89

14000 - Information Technology Occupations 14041 - Computer Operator I 17.52 14042 - Computer Operator II 19.85 14043 - Computer Operator III 21.86 14044 - Computer Operator IV 24.28 14045 - Computer Operator V 26.89 14071 - Computer Programmer I (see 1) 24.61 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 17.52 14160 - Personal Computer Support Technician 27.14 14170 - System Support Specialist 36.13

15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 31.15 15020 - Aircrew Training Devices Instructor (Rated) 37.70 15030 - Air Crew Training Devices Instructor (Pilot) 45.18 15050 - Computer Based Training Specialist / Instructor 31.15 15060 - Educational Technologist 29.89 15070 - Flight Instructor (Pilot) 45.18 15080 - Graphic Artist 23.80 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 42.69 15086 - Maintenance Test Pilot, Rotary Wing 42.69 15088 - Non-Maintenance Test/Co-Pilot 42.69 15090 - Technical Instructor 24.50 15095 - Technical Instructor/Course Developer 29.98 15110 - Test Proctor 19.78 15120 - Tutor 19.78

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.51 16030 - Counter Attendant 9.51 16040 - Dry Cleaner 11.20 16070 - Finisher, Flatwork, Machine 9.51 16090 - Presser, Hand 9.51 16110 - Presser, Machine, Drycleaning 9.51 16130 - Presser, Machine, Shirts 9.51 16160 - Presser, Machine, Wearing Apparel, Laundry 9.51 16190 - Sewing Machine Operator 11.80 16220 - Tailor 12.45 16250 - Washer, Machine 10.08

19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 17.08 19040 - Tool And Die Maker 22.42

21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 16.45 21030 - Material Coordinator 20.82 21040 - Material Expediter 20.82 21050 - Material Handling Laborer 11.88 21071 - Order Filler 11.78 21080 - Production Line Worker (Food Processing) 16.45 21110 - Shipping Packer 14.30 21130 - Shipping/Receiving Clerk 14.30 21140 - Store Worker I 12.16 21150 - Stock Clerk 15.99 21210 - Tools And Parts Attendant 16.45 21410 - Warehouse Specialist 16.45

23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 27.07 23019 - Aircraft Logs and Records Technician 21.78 23021 - Aircraft Mechanic I 25.75 23022 - Aircraft Mechanic II 27.07 23023 - Aircraft Mechanic III 28.34 23040 - Aircraft Mechanic Helper 18.58 23050 - Aircraft, Painter 24.78 23060 - Aircraft Servicer 21.78 23070 - Aircraft Survival Flight Equipment Technician 24.78

23080 - Aircraft Worker 23.07 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 23.07

I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic

25.75

II

23110 - Appliance Mechanic 20.08 23120 - Bicycle Repairer 17.11 23125 - Cable Splicer 27.90 23130 - Carpenter, Maintenance 18.96 23140 - Carpet Layer 19.55 23160 - Electrician, Maintenance 19.74 23181 - Electronics Technician Maintenance I 22.63 23182 - Electronics Technician Maintenance II 23.90 23183 - Electronics Technician Maintenance III 25.31 23260 - Fabric Worker 18.42 23290 - Fire Alarm System Mechanic 21.11 23310 - Fire Extinguisher Repairer 17.33 23311 - Fuel Distribution System Mechanic 22.15 23312 - Fuel Distribution System Operator 20.13 23370 - General Maintenance Worker 19.09 23380 - Ground Support Equipment Mechanic 25.75 23381 - Ground Support Equipment Servicer 21.78 23382 - Ground Support Equipment Worker 23.07 23391 - Gunsmith I 17.33 23392 - Gunsmith II 19.55 23393 - Gunsmith III 21.95 23410 - Heating, Ventilation And Air-Conditioning Mechanic 23411 - Heating Ventilation And Air Contidioning

22.11

23.26 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.70 23440 - Heavy Equipment Operator 18.60 23460 - Instrument Mechanic 26.24 23465 - Laboratory/Shelter Mechanic 20.77 23470 - Laborer 11.88 23510 - Locksmith 19.89 23530 - Machinery Maintenance Mechanic 24.03 23550 - Machinist, Maintenance 18.27 23580 - Maintenance Trades Helper 15.22 23591 - Metrology Technician I 26.24 23592 - Metrology Technician II 27.61 23593 - Metrology Technician III 28.95 23640 - Millwright 21.30 23710 - Office Appliance Repairer 20.93 23760 - Painter, Maintenance 17.41 23790 - Pipefitter, Maintenance 22.66 23810 - Plumber, Maintenance 21.44 23820 - Pneudraulic Systems Mechanic 21.95 23850 - Rigger 21.95 23870 - Scale Mechanic 19.55 23890 - Sheet-Metal Worker, Maintenance 18.94 23910 - Small Engine Mechanic 20.17 23931 - Telecommunications Mechanic I 24.71 23932 - Telecommunications Mechanic II 26.02 23950 - Telephone Lineman 21.95 23960 - Welder, Combination, Maintenance 19.61 23965 - Well Driller 22.24 23970 - Woodcraft Worker 21.95 23980 - Woodworker 16.75

24000 - Personal Needs Occupations 24550 - Case Manager 14.21 24570 - Child Care Attendant 11.22 24580 - Child Care Center Clerk 14.40 24610 - Chore Aide 10.50 24620 - Family Readiness And Support Services 14.21 Coordinator 24630 - Homemaker 16.01

25000 - Plant And System Operations Occupations 25010 - Boiler Tender 21.44 25040 - Sewage Plant Operator 21.79 25070 - Stationary Engineer 21.44 25190 - Ventilation Equipment Tender 15.62 25210 - Water Treatment Plant Operator 21.79

27000 - Protective Service Occupations 27004 - Alarm Monitor 18.34 27007 - Baggage Inspector 12.36 27008 - Corrections Officer 17.17 27010 - Court Security Officer 18.76 27030 - Detection Dog Handler 13.87 27040 - Detention Officer 18.01 27070 - Firefighter 19.60 27101 - Guard I 12.36 27102 - Guard II 13.87

27131 - Police Officer I 21.34 27132 - Police Officer II 23.71

28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.55 28042 - Carnival Equipment Repairer 12.40 28043 - Carnival Worker 9.08 28210 - Gate Attendant/Gate Tender 15.24 28310 - Lifeguard 12.11 28350 - Park Attendant (Aide) 17.05 28510 - Recreation Aide/Health Facility Attendant 12.44 28515 - Recreation Specialist 20.52 28630 - Sports Official 13.57 28690 - Swimming Pool Operator 15.90

29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 26.50 29020 - Hatch Tender 26.50 29030 - Line Handler 26.50 29041 - Stevedore I 24.96 29042 - Stevedore II 28.15

30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 39.52 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 27.25 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 30.01 30021 - Archeological Technician I 18.63 30022 - Archeological Technician II 21.97 30023 - Archeological Technician III 25.82 30030 - Cartographic Technician 26.02 30040 - Civil Engineering Technician 23.04 30051 - Cryogenic Technician I 24.48 30052 - Cryogenic Technician II 27.05 30061 - Drafter/CAD Operator I 18.63 30062 - Drafter/CAD Operator II 20.84 30063 - Drafter/CAD Operator III 23.22 30064 - Drafter/CAD Operator IV 28.59 30081 - Engineering Technician I 16.81 30082 - Engineering Technician II 18.88 30083 - Engineering Technician III 20.03 30084 - Engineering Technician IV 25.94 30085 - Engineering Technician V 30.68 30086 - Engineering Technician VI 37.11 30090 - Environmental Technician 20.50 30095 - Evidence Control Specialist 22.10 30210 - Laboratory Technician 21.89 30221 - Latent Fingerprint Technician I 21.49 30222 - Latent Fingerprint Technician II 23.74 30240 - Mathematical Technician 26.02 30361 - Paralegal/Legal Assistant I 19.85 30362 - Paralegal/Legal Assistant II 25.13 30363 - Paralegal/Legal Assistant III 30.71 30364 - Paralegal/Legal Assistant IV 37.15 30375 - Petroleum Supply Specialist 27.05 30390 - Photo-Optics Technician 26.02 30395 - Radiation Control Technician 27.05 30461 - Technical Writer I 26.71 30462 - Technical Writer II 32.69 30463 - Technical Writer III 39.54 30491 - Unexploded Ordnance (UXO) Technician I 25.12 30492 - Unexploded Ordnance (UXO) Technician II 30.39 30493 - Unexploded Ordnance (UXO) Technician III 36.42 30494 - Unexploded (UXO) Safety Escort 25.12 30495 - Unexploded (UXO) Sweep Personnel 25.12 30501 - Weather Forecaster I 28.59 30502 - Weather Forecaster II 34.78 30620 - Weather Observer, Combined Upper Air Or (see 2) 23.22 Surface Programs 30621 - Weather Observer, Senior (see 2) 25.82

31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.39 31020 - Bus Aide 11.33 31030 - Bus Driver 15.28

31043 - Driver Courier 13.66 31260 - Parking and Lot Attendant 10.55 31290 - Shuttle Bus Driver 14.61 31310 - Taxi Driver 11.40 31361 - Truckdriver, Light 14.61 31362 - Truckdriver, Medium 17.89 31363 - Truckdriver, Heavy 20.45 31364 - Truckdriver, Tractor-Trailer 20.45

99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.82 99030 - Cashier 9.10

99050 - Desk Clerk 11.31 99095 - Embalmer 36.45 99130 - Flight Follower 25.12 99251 - Laboratory Animal Caretaker I 11.17 99252 - Laboratory Animal Caretaker II 11.99 99260 - Marketing Analyst 31.61 99310 - Mortician 36.45 99410 - Pest Controller 15.82 99510 - Photofinishing Worker 12.85 99710 - Recycling Laborer 16.92 99711 - Recycling Specialist 19.79 99730 - Refuse Collector 15.56 99810 - Sales Clerk 12.18 99820 - School Crossing Guard 12.78 99830 - Survey Party Chief 21.10 99831 - Surveying Aide 10.50 99832 - Surveying Technician 20.81 99840 - Vending Machine Attendant 14.93 99841 - Vending Machine Repairer 18.24 99842 - Vending Machine Repairer Helper 14.93

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.48 per hour or $179.20 per week or $776.53 per month

HEALTH & WELFARE EO 13706: $4.18 per hour, or $167.20 per week, or $724.53 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 10 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used.