Amendment_0003.pdf

79453

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Solicitatin W912PM17R0022 is hereby amended as follow s:

A) See Technical Summary of Changes B) Adjustments to Evaluation criteria to add renovation.

C) Add quantity of days to the OPSEC iw atch information.

D) All other terms, provisions, and conditions of the solicitation remain unchanged.

////////////////////////////////////////////////LAST ITEM///////////////////////////////////////////////////////////

1. CONTRACT ID CODE PAGE OF PAGES

1 13

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Feb-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912PM17R0022

X 9B. DATED (SEE ITEM 11)

12-Jan-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Feb-2018

CODE

U S ARMY CORPS OF ENGINEERS, WILMINGTON

WILMINGTON DISTRICT

ATTN: JOHN HILL

69 DARLINGTON AVE

WILMINGTON NC 28403-1343

W912PM 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912PM17R0022

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION 00 21 16 - INSTRUCTIONS TO PROPOSERS

The following have been modified:

INSTRUCTIONS AND REQUIREMENTS

5.1GENERAL PROPOSAL SUBMISSION INSTRUCTIONS & REQUIREMENTS

W912PM17R0022

PN79453

SOF Tactical Equipment Maintenance Facility

Fort Bragg, NC

1. OVERVIEW.

1.1 This Request for Proposal (RFP) solicits construction and design of a two story Tactical Equipment Maintenance Facility (TEMF) complex, petroleum, oil and lubricants, and hazardous waste storage buildings, organizational storage buildings, and organizational vehicle parking. The design of the tactical equipment maintenance facility and other facilities will match the Fort Bragg Installation Design Guide to include concrete foundations and floor slabs, steel frame, exterior metal wall panels above brick veneer masonry walls and sloped metal roof panels. Built-in building systems include fire alarm/mass notification; fire suppression; utility management control; telephone; advanced communications networks; cable television; and infrastructure for intrusion detection, closed circuit surveillance, and electronic access control system. Project includes the installation of electronic security system equipment (intrusion detection, closed circuit surveillance, and electronic access control) funded by other appropriations. Supporting facilities include all related site-work and utilities (electrical, water, gas, sanitary sewer, and information systems distribution), security lighting, power and communication connections in the organizational vehicle parking are for specialized vehicles and deployment containers, storage tanks, security fencing, privately owned vehicle parking, access drives, roads, curb and gutter, sidewalks, storm drainage and treatment structures, signage, landscaping, and other site improvements. Special construction includes sustainable construction features complying with and certifiable to Leadership in Energy and Environmental Design (LEED) "Silver" with enhanced commissioning. Access for persons with disabilities will be provided. Comprehensive interior, electronic security systems, and audio visual design services are included.

Air conditioning: 281kW (80 tons).The period of performance is 600 calendar days. Work location is Fort Bragg, North Carolina. Antiterrorism/Force protection measures and sustainment mandates will be incorporated. The resultant contract will be Firm-Fixed Price (FFP).

1.2 The purpose of the Source Selection plan is to establish a uniform evaluation procedure for the technical evaluation of proposals by the Source Selection Evaluation Board (SSEB) and the development of the Best Value Decision by the Source Selection Authority (SSA) using the Lowest Price Technically Acceptable Source Selection Process (See Federal Acquisition Regulation 15.101-2). The proposal shall describe the capability of the offeror to perform the contract. The proposal should be specific and complete in every detail as well as be prepared simply and economically, providing a straightforward and concise description of capabilities to satisfactorily perform the contract.

2. GENERAL INSTRUCTIONS.

In accordance with FAR Clause 52.215-1, Instructions to Offerors – Competitive Acquisitions, the Government reserves the right to make award without discussions. Therefore, offerors should submit their best technical and price terms in their initial offer and not automatically assume that they will have an opportunity to participate in discussions or to submit a revised offer. The Government may make award of a conforming proposal without discussions, if deemed to be within the best interests of the Government.

In accordance with 15.306(c) (1) and FAR Clause 52.215-1(f) (4), Instructions to Offerors – Competitive Acquisitions, the Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. If the Contracting Officer determines that the number of proposals that would otherwise be in the competitive range exceeds the number at which an efficient competition can be conducted, the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition among the most highly rated proposals.

2.1 Contractor Team Arrangements. The Government will recognize the integrity and validity of contractor teaming arrangements, provided the arrangements are identified and company relationships are fully disclosed in the offer.

As further described in paragraph 2.3, below, the Government will only evaluate the information submitted by the legal entity with whom the Government would enter into a contract. This is the legal entity represented in Tab E, as registered in System for Award Management (SAM) and identified by its specifically assigned CAGE Code.

2.2 If applicable, a 8(a) Joint Venture or SBA/DoD approved Mentor-Protégé must submit all required documentation with their offer to be considered responsive, IAW the requirements set forth in Title 13 Code of Federal Regulations (CFR) Part 125.8.

2.3 The Government will only evaluate the information submitted by the legal entity with whom the Government would enter into a contract. This is the legal entity represented in Tab E, as registered in System for Award Management (SAM) and identified by its specifically assigned CAGE Code. However, IAW CFR 125.8(e), the Government will also evaluate past experience and past performance submitted by the individual firms that make up a joint venture.

2.4 Notwithstanding the specific requirements of any other area of the RFP, information submitted about any company other than the offeror, whether a predecessor company, affiliated company, subsidiary (including wholly owned subsidiaries), or subcontractor, WILL NOT be evaluated for any factor.

2.5 Offerors shall submit their proposal in accordance with the Section 3. General Proposal Format, paragraph 3.4.

2.6 Proposals are due no later than the time and date specified in Block 13 of Standard Form 1442.

3. GENERAL PROPOSAL FORMAT.

3.1 Cover Page. Include the title of the solicitation, solicitation number, offeror name, and date of the submittal.

3.2 Table of Contents. Each volume of the proposal shall contain a detailed table of contents. If more than one Adobe PDF file is used for a volume, the complete table of contents shall be included in each. Any materials submitted but not required by this solicitation (such as company brochures) shall be relegated to appendices.

3.3 All information intended to be evaluated as part of the Technical Proposal must be submitted as part of the Technical Proposal. Do not cross-reference similar material in the Price Proposal, or vice versa. No dollar amounts from the Price Proposal are to be included in the Technical proposal.

3.4 Each offeror must submit Price, Technical, and Past Performance Proposals via the AMRDEC SAFE website.

No hard paper copies will be accepted or evaluated. The Price, Technical, and Past Performance Proposals must be received by the closing date and time set for receipt of proposals.

In an effort to reduce paperwork and reduce cost, all proposals shall be submitted electronically. All submissions shall be in Adobe PDF format and shall be on 8 ½ x 11 size pages in no less than a 10 pitch or 10 font. Page limitations, where specified in the RFP, shall be considered a maximum. Offerors may use compressions utility software such as WinZip or PKZip to reduce file size and facilitate transmission.

Title the file(s) in the following format:

W912PM17R0022_COMPANY NAME_VOLUME I

W912PM17R0022_COMPANY NAME_VOLUME II

W912PM17R0022_COMPANY NAME_VOLUME III

Submit the Price, Technical, and Past Performance Proposals electronically via the AMRDEC SAFE website at:

https://safe.amrdec.army.mil/SAFE/welcome.aspx. At the AMRDEC SAFE website, select the blue button labeled ‘Click Here’, below the ‘Non-CAC Users’ title. Register, access the site and submit your proposal(s). [Note: It has been reported that documents are more quickly uploaded into the AMRDEC SAFE website when using a Firefox web browser. The Government cannot verify that this is true and offers no guarantee that offerors will have more success utilizing any particular browser.

When your proposals are submitted via the AMRDEC SAFE website, the website will provide notification of the submittal to the Government recipients. When completing the information for transmittal at the AMRDEC SAFE website, you will be required to enter email addresses for the recipients. For this solicitation, the recipients will be the Contracting Officer and Contract Specialist. The Contract Specialist for this project is Tonja Dreke: email address is Tonja.j.dreke@usace.army.mil. The Contracting Officer for this project is Mr. John Hill:

email address is john.t.hill@usace.army.mil. BOTH of these email addresses are the ones you will enter as recipients.

In addition, after uploading your documents, you will be required to verify your email address before AMRDEC will send notification to the Government recipients. This is a very important step – even if you successfully upload your proposal to AMRDEC SAFE, notification will not be sent to the Government until you verify your email address, which may result in the rejection of your proposal for lateness. Follow the instructions on the AMRDEC website and confirmation emails you receive from AMRDEC.

Proposal due Date and Time:

Request For Proposal No: W912PM17R0022 Due Date of Proposal: Febuary 26, 2018 Time by which Proposals are Due: 2:00 P.M. (Eastern Time) Title of Project: PN 79453, SOF Tactical Equipment Maintenance Facility (TEMF) Fort Bragg, NC

The date and time of delivery will be established by the time of receipt of the email notification to the Contract Specialist and Contracting Officer by the AMRDEC SAFE website, not by the date and time of uploading of the proposal into the AMRDEC SAFE website. Do not assume that electronic communication is instantaneous – in fact, it can take several minutes or even hours in some cases. Please make allowances for delays in transmittal. If an electronic submission is uploaded minutes before the deadline but notification is not actually received in the recipients’ email inboxes until after the deadline, the submission will be considered late. The Government will not be responsible for proposals delivered to any location or to anyone other than those designated to receive proposals on its behalf. Offerors are responsible for ensuring that proposals are submitted so as to reach the designated recipient of proposals. Offerors are responsible for allowing sufficient time for the proposal to be received in accordance with the instructions provided.

3.5 The offeror is responsible for including sufficient details in its proposal to permit a complete and accurate evaluation. Accordingly, the offeror shall be clear and concise in its proposal. The Government will not make assumptions concerning the offeror’s intent.

3.6 The technical data criteria specified for each factor identified herein and as described in these instructions shall be submitted as part of the proposal. Failure to submit all the data required by the RFP, and these instructions may be cause for determining a proposal incomplete and, therefore, not considered for award.

3.7 Do not include exceptions to the terms and conditions of the solicitation in either the technical or price proposal.

Should the offer include any standard company terms and conditions that conflict with the terms and conditions of the solicitation, the offer may be determined “unacceptable” and thus ineligible for award. Should the offeror have any questions related to specific terms and conditions, these should be resolved prior to the submission of the offer.

3.8 Tabs. Proposal shall be organized and tabbed as follows:

3.8.1 VOLUME I: OFFEROR’S CERTIFICATIONS AND PRICE (FACTOR 1)

One (1) electronic copy Adobe PDF file as tabbed per the table below shall be submitted and one (1) original copy of the bid guarantee in both electronic and hardcopy shall be submitted.

TAB CONTENTS OF THE PRICE PROPOSAL

A The Proposal Cover Sheet B Standard Form 1442 C Acknowledgement of Amendments (If Applicable)

D FACTOR 1: PRICE

E Section 00 45 00 – Representations and Certifications F Teaming Arrangement (If Applicable) G Bid Guarantee (Bid Bond) H Subcontracting Plan (Large Businesses Only)

TAB A – The proposal cover sheet is required by FAR 52.215-1 (c) (2) and must be submitted by all offerors.

The format for the proposal cover sheet is as follows:

PROPOSAL COVER SHEET

1. The solicitation number;

2. The name, address, and telephone and facsimile numbers of the offeror (and electronic address if available);

3. A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and agreement to furnish any or all items upon which prices are offered at the price set opposite each item;

4. Names, titles, and telephone and facsimile numbers (and electronic addresses if available) of persons authorized to negotiate on the offeror’s behalf with the Government in connection with this solicitation; and

5. Name, title, and signature of person authorized to sign the proposal. Proposals signed by an agent shall be accompanied by evidence of that agent’s authority, unless that evidence has been previously furnished to the issuing office.

Offerors should ensure telephone number; fax number, e-mail address, DUNS number and CAGE Code are all included. DUNS number will be used to access Contractor Performance Assessment Reporting System (CPARS) data. Offerors should also provide any other assigned number that identifies them in the CPARS database. If a separate DUNS has been created for a joint venture (J-V) it must be submitted. The offeror should also submit their Tax ID number on the proposal data Sheet.

TAB B - Standard Form 1442, completed and signed by authorized individual(s) of the offeror. Offers submitted in the name of a Joint Venture must be signed in accordance with the terms and conditions specified in the joint venture agreement as evidenced in the proposal.

TAB C - If applicable - All amendments must be acknowledged by all offerors and duly executed with an original signature by an official authorized to bind the company in accordance with FAR 4.102.

TAB D – Factor 1 - Price. Proposed price schedule is to be completed in its entirety by all offerors to include the Subtotals and Totals section as found in Section 00 10 00 - Solicitation, Contract Line Item Number (CLIN) Schedule.

TAB E - Section 00 45 00 – Representations and Certifications. Offerors shall include any narratives as it pertains to the requirement at 2.2 to document any teaming arrangement the offeror has or will enter into.

TAB F - Teaming Agreement, if applicable. See paragraph 2.1 and 2.2 Note to 8(a)—SBA must approve a joint venture agreement prior to the award of an 8(a) contract on behalf of the joint venture.

TAB G - Offerors shall provide a fully executed Bid Bond as required by FAR Clause 52.228-1, Bid Guarantee in both Hard copy and electronically in Tab G.

For the purposes of this Request for Proposal, please note that in accordance with (IAW) FAR 28.001:

“Bond means a written instrument executed by a bidder or contractor (the “principal”), and a second party (the “surety” or “sureties”) (except as provided in 28.204), to assure fulfillment of the principal’s obligations to a third party (the “obligee” or “Government”), identified in the bond. If the principal’s obligations are not met, the bond assures payment, to the extent stipulated, of any loss sustained by the obligee.”

Bonds shall therefore be executed in the name of the legal entity, whether a joint venture, partnership or the Prime Contractor of an informal teaming arrangement, with whom the government would enter into a contract for a successful offeror. The entity named on the bond must be able to acquire bonding capacity on its own merits, and not as the result of indemnification from a subcontractor or third party.

TAB H - Subcontracting Plan – FOR LARGE BUSINESS OFFERORS ONLY.

Large businesses will not be eligible for award if they fail to submit an acceptable Subcontracting Plan.

Subcontracting Plan shall be prepared in accordance with FAR 52.219-9, DFARS 252.219-7003 and SBA’s Electronic Subcontracting Reporting System (eSRS) located at http://esrs.gov. Instructions for completion of requisite forms, as well as guidance on coordinating and preparing for all compliance reviews by Federal agencies can be found at this website. Offerors are to ensure subcontractors agree to submit to ESRS.

3.8.2 VOLUME II: TECHNICAL PROPOSAL (FACTORS 2-4)

One (1) electronic copy Adobe PDF file as tabbed per the table below shall be submitted.

TAB CONTENTS OF THE TECHNICAL PROPOSAL

A Factor 2: Past Experience – Construction B Factor 3: Past Experience - Design C Factor 4: Key Personnel

Page Limitations: The following page limitations are established for each factor described above:

Factor 2: Past Experience, Construction – Limited to 20 pages (maximum of 5 forms) Factor 3: Past Experience, Design – Limited to 20 pages (maximum of 5 forms) Factor 4: Key Personnel – Limited to 5 pages per individual resume

3.8.3 VOLUME III: PAST PERFORMANCE PROPOSAL (FACTOR 5)

One (1) electronic copy Adobe PDF file as tabbed per the table below shall be submitted.

TAB CONTENTS OF THE PAST PERFORMANCE

A Factor 5: Past Performance

Page Limitations: Limited to no fewer than three (3) and no more than five (5) projects. Individual project Past Performance Assessment Questionnaires shall not exceed four (4) pages; Government evaluators will review and evaluate only the information contained on the first four (4) pages.

4. SUBMISSION REQUIREMENTS & EVALUATION FACTORS

VOLUME II: TAB A—FACTOR 2 – PAST EXPERIENCE, CONSTRUCTION

4.1 SUBMISSION/MINIMUM REQUIREMENTS:

4.1.1 The offeror shall demonstrate the experience as a prime contractor on projects of similar size, scope, and complexity.

4.1.2 The minimum requirement for a project of similar size, scope, or complexity is defined as having all of the following criteria:

o Forty thousand 40,000 square feet (SF) or more aggregate interior space.

o Includes a multi-story building or multiple buildings on a single project.

o Total value of project equal to or greater than $8,000,000.00

4.1.3 The offeror shall complete a minimum of three (3), but no more than five (5), “Experience Information” forms, (See Example 1), in response to this factor. All projects submitted must be at least 50% complete within the last six (6) years preceding the date of the solicitation

4.1.4 Offerors shall utilize Experience Information Form in Appendix A, Example 1. This sheet is MANDATORY and SHALL be used to submit project information. For all submitted projects, the description of the project shall clearly describe the scope of work performed and the relevancy to the project requirements of this RFP. If the same project is being used to demonstrate construction and design experience, submit separate Project Data Sheets for construction and design. Except as specifically requested, the Government will not consider information submitted in addition to this form. Individual blocks on this form may be expanded; however, total length for each project data sheet shall not exceed two (2) pages.

4.1.5 If the offeror is a Joint Venture (J-V), relevant project experience should be submitted for projects completed by the Joint Venture entity, or the individual firms that make up the joint venture. Offerors that are part of the DoD Mentor Protégé program may only submit two (2) recent and relevant project completed by the Mentor.

Offerors are still limited to a total of five (5) projects. Experience of proposed subcontractors to be utilized on this project will not be considered.

4.2 EVALUATION CRITERIA:

4.2.1 The Government will evaluate the extent of recent, relevant experience of the prime contractor as identified in paragraph 4.1.2. Projects that were awarded on an individual task/delivery order basis will not be aggregated for purposes of meeting minimum or additional criteria. Federal Government project experience will not be rated inherently more important than non-Federal Government project experience.

4.2.2 To be considered eligible for award, the Government will verify that each offeror has submitted a minimum of three (3) projects which meet the minimum criteria of paragraph 4.1.2.

4.2.3 The offeror’s Past Experience will be evaluated based on the Government’s assessment of each submitted project’s similarity (in terms of size, scope and complexity) to the work described in this RFP.

***Amendment 0003*** Scope/Complexity: New general building construction or renovation to include but not limited to site development, mechanical, electrical, structural, etc.

4.2.4 The Government will review the project experience of the offeror on projects provided in response to the Past Experience Factor. Offerors must meet all of the minimum acceptability standards to receive an “ACCEPTABLE” rating on this factor.

5. SUBMISSION REQUIREMENTS & EVALUATION FACTORS

VOLUME II: TAB B—FACTOR 3 – PAST EXPERIENCE, DESIGN

5.1 SUBMISSION/MINIMUM REQUIREMENTS:

5.1.1 Submit a minimum of three (3) and a maximum of five (5) relevant and recent design projects for the design team that best demonstrates design experience similar in size, scope, and complexity to the RFP. The Government will consider the qualifications, performance, and experience of the proposed designer of record, only if the prime contractor is firmly committed to using that designer (through a teaming agreement or other appropriate arrangement). Submission of a fully executed teaming agreement, to include authorized signatures of each company party the agreement, shall accompany the completed proposal at time of solicitation submission by or before the proposal due date.

5.1.2 The minimum requirement for a project of similar size, scope, or complexity is defined as having all of the following criteria:

o Forty thousand 40,000 square feet (SF) or more aggregate interior space.

o Includes a multi-story building or multiple buildings on a single project.

***Amendment 0003***

5.1.3 The offeror shall complete a minimum of three (3), but no more than five (5), “Experience Information” forms, (See Example 1), in response to this factor. All Design projects submitted must be at least 50% (CONSTRUCTION) complete within the last six (6) years preceding the date of the solicitation.

5.1.4 Offerors shall utilize Experience Information Form in Appendix A, Example 1. This sheet is MANDATORY and SHALL be used to submit project information. For all submitted projects, the description of the project shall clearly describe the scope of work performed and the relevancy to the project requirements of this RFP. If the same project is being used to demonstrate construction and design experience, submit separate Project Data Sheets for construction and design. Except as specifically requested, the Government will not consider information submitted in addition to this form. Individual blocks on this form may be expanded; however, total length for each project data sheet shall not exceed two (2) pages.

5.1.5 If the offeror is a Joint Venture (J-V), relevant project experience should be submitted for projects completed by the Joint Venture entity, or the individual firms that make up the joint venture. Offerors that are part of the DoD Mentor Protégé program may only submit two (2) recent and relevant project completed by the Mentor.

Offerors are still limited to a total of five (5) projects. Experience of proposed subcontractors other than the designer of record, to be utilized on this project will not be considered.

5.2 EVALUATION CRITERIA:

5.2.1 The Government will evaluate the extent of recent, relevant experience of the prime contractor as identified in paragraph 5.1.2. Projects that were awarded on an individual task/delivery order basis will not be aggregated for purposes of meeting minimum or additional criteria. Federal Government project experience will not be rated inherently more important than non-Federal Government project experience.

5.2.2 To be considered eligible for award, the Government will verify that each offeror has submitted a minimum of three (3) projects which meet the minimum criteria of paragraph 5.1.2.

5.2.3 The offeror’s Past Experience will be evaluated based on the Government’s assessment of each submitted project’s similarity (in terms of size, scope and complexity) to the work described in this RFP.

***Amendment 0003*** Scope/Complexity: New general building construction or renovation to include but not limited to site development, mechanical, electrical, structural, etc.

5.2.4 The Government will review the project experience of the offeror on projects provided in response to the Past Experience Factor. Offerors must meet all of the minimum acceptability standards to receive an “ACCEPTABLE” rating on this factor.

6. SUBMISSION REQUIREMENTS & EVALUATION FACTORS

VOLUME II: TAB C —FACTOR 4 – KEY PERSONNEL.

6.1 SUBMISSION/MINIMUM REQUIREMENTS:

6.1.1 Each offeror shall provide resumes for the following Key Personnel proposed for this contract. Resumes shall not exceed five (5) pages per person. The proposed position of each person shall be clearly stated at the beginning of the resume.

CQC System Manager

The CQC System Manager shall be a graduate engineer, graduate architect, or a graduate of construction management, with a minimum of 5 years construction experience on construction similar to this contract, or a construction person with a minimum of 10 years in related work.

Refer to:

3.4.2 CQC SYSTEM MANAGER

SECTION 01 45 00.00 10 QUALITY CONTROL

Project Superintendent

The Project Superintendent shall have a minimum of 5 years of experience as a Project Superintendent.

Refer to:

3.1 GENERAL REQUIREMENTS

SECTION 01 45 00.00 10 QUALITY CONTROL

Licensed Architect/Designer of Record (DOR)

The DOR is registered or licensed to practice their respective design profession as defined by the statutory requirements of the professional registration laws in state in which the design professional works. The DOR shall have a minimum of five (5) years of experience as a licensed design professional.

Refer to:

1.3.10 DESIGNER OF RECORD (DOR)

SECTION 01 45 35 SPECIAL INSPECTIONS

6.1.2 Sample suggested resume format is included with this RFP (Appendix A, Example 2). If offerors elect not to use the suggested resume format, all information identified on the sample format is still required for each resume submitted under this Factor. Proposals that fail to include resumes or that fail to include all required information on these resumes may be rejected as unacceptable.

6.1.3 The Key Personnel identified must be used on the project. No deviations will be permitted unless they meet the same qualifications and experience of those individuals proposed and are expressly approved by the Contracting Officer in advance. An offeror’s use of different personnel than those proposed without approval from the Contracting Officer will be grounds for a Termination for Default.

6.2 EVALUATION CRITERIA:

6.2.1 The Government will review the resumes provided in response to the Personnel Factor. Offerors must demonstrate all of the following minimum acceptability standards to receive an “ACCEPTABLE” rating on this factor.

6.2.2 The offeror must demonstrate in all resumes that the key personnel proposed have a minimum of five (5) years of specialized and relevant experience in the following roles: CQC System Manager, Project Superintendent, and Licensed Architect/Designer of Record (DOR).

6.2.3 Failure to demonstrate the minimally acceptability standards under this factor will result in an “UNACCEPTABLE” rating and possible elimination from further consideration for contract award.

7. SUBMISSION REQUIREMENTS & EVALUATION FACTORS

VOLUME III: TAB A—FACTOR 4 – PAST PERFORMANCE.

7.1 SUBMISSION/MINIMUM REQUIREMENTS:

7.1.1 Past performance refers to the quality of recent and relevant project experience from the owner’s perspective.

The offeror shall complete and provide a Past Performance Assessment Questionnaire (Appendix A, Example 3) on no fewer than three (3) and no more than five (5) projects. Projects submitted under this factor must first be deemed recent and relevant.

7.1.1.1 Relevant: Offer must demonstrate experience as a prime contractor on projects of similar size, scope, or complexity. The minimum requirement for a project of similar size, scope, or complexity is defined as a requirement with all of the following:

o Forty thousand 40,000 square feet (SF) or more aggregate interior space o Includes a multi-story building or multiple buildings on a single project

7.1.1.2 Recent: Projects of projects of similar size, scope, and complexity that must have been completed (fully designed and at least 50% construction progress completed) within six (6) years preceding the date of the solicitation

7.1.2 Though not required, ideally project past performance information submitted under this factor would be on the same projects submitted for consideration under FACTOR 2, PAST EXPERIENCE. Individual project Past Performance Assessment Questionnaires shall not exceed four (4) pages; Government evaluators will review and evaluate only the information contained on the first four (4) pages. If any firm has multiple functions or divisions, limit the project examples to those performed by the division, unit or team member submitting the offer. The Government will call and confirm information provided by the offeror on the Past Performance Assessment Questionnaire with the points of contact, to the extent necessary to conduct a meaningful evaluation. The Government reserves the right to interview other individuals if the point of contact is not available.

7.1.3 The Government may contact sources other than those provided by the offeror for information with respect to past performance. These other sources may include but are not limited to: Contract Performance Assessment Report (CPAR), Past Performance Information Retrieval System (PPIRS), other Government sources, and interviews with organizations or individuals familiar with the offeror’s performance.

7.1.4 Offerors shall utilize the Past Performance Assessment Questionnaire in Appendix A, Example 3.

7.1.5 If the offeror is a Joint Venture (J-V), relevant project experience should be submitted for projects completed by the Joint Venture entity, or the individual firms that make up the joint venture. Offerors that are part of the DoD Mentor Protégé program may only submit two (2) recent and relevant project completed by the Mentor.

Offerors are still limited to a total of five (5) projects. Experience of proposed subcontractors to be utilized on this project will not be considered.

7.2 EVALUATION CRITERIA:

7.2.1 The Government will consider past performance of the prime construction contractor. If a firm has multiple functions or divisions, the Government will only evaluate the past performance of the unit or division submitting the offer. Where the Government views an offeror’s role, or that of its team members, if any, as not significant or as not clearly defined, the Government reserves the right to view this lack of involvement, or clarity, as a risk which may impact an offeror’s rating for this factor despite the quality of recent, relevant past performance information.

7.2.2 Past performance shall be initially evaluated to determine whether the offeror’s present/past performance is recent, and relevant to the effort to be acquired.

Relevant: The minimum requirement for a project of similar size, scope, and complexity is defined as a forty thousand 40,000 square feet (SF) or more aggregate interior space, including a multi-story or multiple buildings on a single project, with a total value equal to or greater than $8,000,000.00.

Recent: Projects of projects of similar size, scope, and complexity that must have been completed (fully designed and at least 50% construction progress completed) within six (6) years preceding the date of the solicitation

7.2.3 The Government will evaluate ONLY recent and relevant past performance based on the elements listed below to assign a confidence rating of acceptable/unacceptable.

7.2.4 Second, the past performance evaluation shall determine how well the offeror performed on the prior contracts.

The contractor shall have no “unsatisfactory” or “marginal” ratings in the following criteria in Contract Performance Assessment Report (CPAR): quality, schedule, cost control, management, and utilization of small business, regulatory compliance, and safety.

(1) Quality of Construction. The Government will evaluate all information available with respect to the quality of the actual construction undertaken and the offeror’s ability to maintain quality control and accuracy of quality control documentation.

(2) Schedule. The Government will evaluate all information available with respect to the completion of projects within the scheduled completion times.

(3) Cost Control. The Government will evaluate all information available with respect to the offeror’s ability to efficiently utilize resources and demonstrate cost responsibility.

(4) Management. The Government will evaluate all information available with respect to the offeror’s ability to manage resources and key personnel.

(5) Utilization of Small Business. The Government will evaluate all information available with respect to the offeror’s ability to meet small business subcontracting plan goals.

(6) Regulatory Compliance. The Government will evaluate all information available with respect the offeror’s ability to enforce laws and regulations, correct deficiencies when non-compliant, and communicate laws and regulations to subcontractors.

(7) Safety. The Government will evaluate all information available with respect to the contractor’s safety program or efforts.

7.2.5 Failure to demonstrate the minimally acceptability standards under this factor will result in an “UNACCEPTABLE” rating and possible elimination from further consideration for contract award.

8. EVALUATION STANDARDS.

8.1 The Government will evaluate proposals using the Lowest Price Technically Acceptable Source Selection Process of FAR 15.101-2.

8.2 Proposals will be evaluated for acceptability, but not ranked using non-cost/price factors.

8.3 Tradeoffs will not be permitted.

8.4 Each evaluation factor and its risk rating combined will be determined and assigned using the adjectival and color descriptions contained herein. Upon assessment of each individual sub- factor and its risk rating, the appropriate overall rating for the technical proposal will be assigned using these acceptable and unacceptable (pass/fail) ratings as defined below:

Color Rating Description

Green Acceptable Proposal clearly meets the minimum requirements of the solicitation.

Red Unacceptable Proposal does not clearly meet the minimum requirements of the solicitation.

8.5 Upon assessment of past performance information, the appropriate overall rating for past performance will be assigned using these acceptable and unacceptable (pass/fail) ratings as defined below:

Color Rating Description

Green Acceptable Based on the offeror’s performance record, the Government has a reasonable expectation that the offeror will successfully perform the required effort, or the offeror’s performance record is unknown. (See note below)

Red Unacceptable Based on the offeror’s performance record, the Government does not have a reasonable expectation that the offeror will be able to successfully perform the required effort.

8.6 In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the offeror may not be evaluated favorably or unfavorably on past performance (see FAR 15.305 (a) (2) (iv)). Therefore, the offeror shall be determined to have unknown (or “neutral”) past performance. In the context of acceptability/unacceptability, a neutral rating shall be considered “acceptable.”

8.7 To be considered technically acceptable, no technical factor in the proposal may be determined to be unacceptable. The failure of a proposal to meet any of the acceptability standards for non-cost factors will result in a technically unacceptable rating and preclude award.

9. RELATIVE IMPORTANCE OF FACTORS.

9.1 Evaluation factors other than cost or price are of equal importance. An unacceptable rating on any non-price factor will render a proposal ineligible for award.

10. PROPOSAL EVALUATION

10.1 Proposals must meet all the criteria stated in this RFP in order to be eligible for award, to include responsiveness, technical acceptability, and responsibility.

10.2 The Government will evaluate each proposal independently from other proposals using only the RFP evaluation criteria.

11. EXCEPTIONS.

11.1 Exceptions to the contractual terms and conditions of the solicitation (e.g., standard company terms and conditions) may result in a determination to reject a proposal.

12. RESTRICTIONS.

12.1 Failure to submit all the data in the format indicated in this section may be cause for determining a proposal incomplete and, therefore, not considered for evaluation, and for subsequent award.

13. PRICE.

13.1 Price analysis will be performed to determine fairness and reasonableness as well as to assure an understanding of the work and ability to execute the task order at the price proposed. The evaluation will determine the extent to which the price proposal is realistic and consistent with the requirements of the RFP, to include limitations of the specified CCL, if any, reflect a clear understanding of the requirements, and are consistent with the information provided by the offeror.

14. BASIS FOR AWARD.

14.1 Award will be made on the basis of the lowest evaluated price of technically acceptable proposals meeting or exceeding the acceptability standards for non-cost factors.

14.2 The proposal that provides the lowest price and is otherwise technically acceptable in all factors will be selected for award.

SECTION 00 73 00 - SUPPLEMENTARY CONDITIONS

The following have been modified:

ATOPSEC

Access and General Protection/Security Policy and Procedures. This standard language text is for contractor employees with an area of performance within an Army controlled installation, facility or area. Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office.

Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

iWATCH Training. This standard language is for contractor employees with an area of performance within an Army controlled installation, facility or area. The contractor and all associated sub-contractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity ATO). This local developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance with the results reported to the COR NLT 30 calendar days after contract award.

Eligibility Verification for Employment. E-Verify is an Internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. The U.S. Department of Homeland Security is working to stop unauthorized employment. By using E-Verify to determine the employment eligibility of their employees, companies become part of the solution in addressing this problem. All U.S. employers must complete and retain a Form I-9 for each individual they hire for employment in the United States. This includes citizens and noncitizens. On the form, the employer must examine the employment eligibility and identity document(s) an employee presents to determine whether the document(s) reasonably appear to be genuine and relate to the individual and record the document information on the Form I-9. The list of acceptable documents can be found on the last page of the form. E-Verify is mandatory for employers with federal contracts or subcontracts that contain the Federal Acquisition Regulation E-Verify clause.

(End of Summary of Changes)

PN 79453

Amendment 0003

TECHNICAL SUMMARY OF CHANGES

A. SPECIFICATIONS:

The revised and added Sections listed below (revised and added by Amendment No. 0003) are hereby added to and made a part of the solicitation. Revised or added information is underlined and deleted information is struck out. Revisions can be located in the appropriate volume of specifications by searching for an asterisk and amendment number (i.e., *1).

PROJECT TABLE OF CONTENTS

Revised Sections Added Sections

01 11 00.01 APPENDIX Z

01 11 00.02 APPENDIX AA

01 11 00.03 01 11 00.06

FF&E

Cover Sheet 06-Manufacturers and Alternate Manufacturers List 07-Procurement Method

B. CONTRACT DRAWINGS: There are no drawing changes with this amendment.

GSB TEMF BR79453

Ft. Bragg, NC

PROJECT TABLE OF CONTENTS

DIVISION 01 - GENERAL REQUIREMENTS

APPENDICES

APPENDIX A

APPENDIX B

APPENDIX C

APPENDIX D

APPENDIX E

APPENDIX F

APPENDIX G

APPENDIX H

APPENDIX I

APPENDIX J

APPENDIX K

APPENDIX L

APPENDIX M

APPENDIX N

APPENDIX O

APPENDIX P

APPENDIX Q

APPENDIX R

APPENDIX S

APPENDIX T

APPENDIX U

Appendix V

APPENDIX W

APPENDIX X

APPENDIX Y

APPENDIX Z

APPNEDIX

AA

SUBSURFACE EXPLORATION AND GEOTECHNICAL ENGINEERING REPORT

SOCOM RESIDENT OFFICE EROSION AND SEDIMENT CONTROL POLICIES

ENVIRONMENTAL

HYDRANT FLOW TEST DATA

FORT BRAGG, NC WEATHER DATA

INTERIOR SIGNAGE REQUIREMENTS

PATRIOT POINT ARCHITECTURAL COLORS AND MATERIALS

TEMF FEATURES MATRICES

UTILITY RATES AND CHARGES

SECRET INTERNET PROTOCOL ROUTER NETWORK (SIPRNET) TECHNICAL

IMPLEMENTATION CRITERIA

INSTALLATION DESIGN CRITERIA (IDC) FOR FORT BRAGG SPECIFIC

COMMUNICATIONS INFRASTRUCTURE REQUIREMENTS FORT BRAGG

FORT BRAGG TELECOM EQUIPMENT LABELING SCHEMATIC

USASOC TELECOM ROOM LAYOUTS, RACK ELEVATIONS, AND DETAILS

NATURAL GAS UTILITY SYSTEM PIPELINE SPECIFICATIONS

OWNER’S PROJECT REQUIREMENTS DOCUMENT FOR LEED

COMMISSIONING

PERMIT LIST AND FORMS

USASOC VTC PRODUCT DESIGN GUIDE

NATIONAL SECURITY TELECOMMUNICATIONS AND INFORMATION

SYSTEMS SECURITY

VALUE ENGINEERING STUDY

USASOC INFORMATION TECHNOLOGY (IT) TECHNICAL DESIGN GUIDE

ASBESTOS SURVEYS FOR DEMOLITION

FT. BRAGG IDG PRACTICAL PLANTINGS LIST

YARBOROUGH COMPLEX DESIGN NARRATIVE

YARBOROUGH COMPLEX OUTSIDE COMMUNICATION INFRASTRUCTURE

TOTAL DESIGN ANALYSIS EXAMPLE FORMAT

TEMPORARY STOCKPILE SKETCH

GSB VEHICLE DENSITY*3

-- End of Project Table of Contents -- (Amendment 0003)

01 10 00.10 38 SUPPLEMENTARY SPECIAL CONTRACT REQUIREMENTS

01 11 00 SUMMARY OF WORK

01 11 00.01 SITE, CIVIL, UTILITIES, AND LANDSCAPING SUMMARY OF WO

01 11 00.02 ARCHITECTURAL AND INTERIOR DESIGN SUMMARY OF WORK

01 11 00.03 STRUCTURAL SUMMARY OF WORK

01 11 00.04 MECHANICAL AND PLUMBING SUMMARY OF WORK

01 11 00.05 FIRE PROTECTION SUMMARY OF WORK

01 11 00.06 ELECTRICAL AND ELECTRONIC SYSTEMS SUMMARY OF WORK

01 32 01 PROJECT SCHEDULE

01 33 00 SUBMITTAL PROCEDURES

01 33 16 DESIGN DATA (DESIGN AFTER AWARD)

01 33 29 SUSTAINABILITY

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.00 10 QUALITY CONTROL

01 45 00.15 10 RESIDENT MANAGEMENT SYSTEM CONTRACTOR MODE (RMS CM)

01 45 35 SPECIAL INSPECTIONS

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS

01 74 19 CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT

01 78 00 CLOSEOUT SUBMITTALS

01 78 23 OPERATION AND MAINTENANCE DATA

SOF GSB TEMF BR79453

SECTION TABLE OF CONTENTS

DIVISION 01 - GENERAL REQUIREMENTS

SECTION 01 11 00.01

SITE, CIVIL, UTILITIES, AND LANDSCAPING SUMMARY OF WORK

11/15

PART 1 GENERAL

1.1 REFERENCES

1.2 EXISTING CONDITIONS

1.3 SITE DESCRIPTION

1.4 GENERAL SITE DESIGN REQUIREMENTS

1.5 SITE FEATURES

1.5.1 Access Drives,Hardstand Parking and Bicycle Parking

1.5.2 Vehicle Circulation

1.5.3 Curbing

1.5.4 Trash Enclosure

1.5.5 Bollards

1.5.6 Security Fence

1.5.7 Vehicle Crash Barriers

1.5.8 Sidewalks

1.5.9 Site Storage

1.5.10 Anti-Terrorism Force Protection (ATFP)

1.6 GRADING

1.6.1 Finished Floor Elevations

1.6.2 Roads, Streets, Access Drives and Parking Lots

1.6.3 Finish Grade Contours and Spot Elevations

1.7 EARTHWORK

1.7.1 Subsurface Report

1.7.2 Bunkers

1.7.3 Unexploded Ordnance

1.7.4 Soil Compaction

1.7.5 Groundwater

1.8 CONSTRUCTION QUALITY CONTROL TESTING

1.9 PAVEMENTS

1.9.1 Rigid Pavement

1.9.2 Flexible Pavement

1.9.3 Pavement Marking

1.9.4 Signage

1.9.5 Safety

1.10 GENERAL UTILITIES

1.10.1 Road Crossings

1.10.2 Excavations

1.10.3 Safety and Traffic Control

1.10.4 Marktape

1.10.5 Tracer Wire

1.10.6 Outages

1.10.7 Cathodic Protectio

1.10.8 Wetlands and Stream Crossings

1.11 WATER UTILITIES

1.12 SANITARY SEWER SYSTEMS

1.13 STORM DRAINAGE SYSTEM

SECTION 01 11 00.01 Page 1 (Revised by Amendment 0003)

1.13.1 Storm Water Management & Erosion Control

1.13.2 Layout

1.13.3 Hardstands

1.13.4 Culverts

1.13.5 Sizing of Inlets

1.13.6 Sizing of Pipes

1.13.7 Roof Drainage

1.14 NATURAL GAS

1.15 PERMITS

1.16 DEMOLITION

1.17 HAUL ROUTES AND STAGING AREA

1.18 TERMITE TREATMENT

1.19 LANDSCAPING

1.20 ADDITIONAL SITE REQUIREMENTS

1.20.1 Height Restrictions

1.20.2 Coordination With other Contractors

1.21 SPECIFICATIONS

PART 2 PRODUCTS

PART 3 EXECUTION

-- End of Section Table of Contents --

SECTION 01 11 00.01 Page 2 (Revised by Amendment 0003)

SECTION 01 11 00.01

SITE, CIVIL, UTILITIES, AND LANDSCAPING SUMMARY OF WORK

11/15

PART 1 GENERAL

1.1 REFERENCES

The…