W912PL19B0009_Amendment0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICAITON NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicble)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICIATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a)By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPIRATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION ( Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

1 16

0001 Aug 22, 2019

W912PL

USACE-LOS ANGELES DISTRICT

CONTRACTING DIVISION, WEST REGION BRANCH

915 WILSHIRE BLVD, SUITE 930

LOS ANGELES, CA 90017

W912PL19B0009

Jul 30, 2019

REPAIR REPAIR ANALYTICAL LAB, AFRL, B8523, EDWARDS AIR FORCE BASE, CA

Attachments:

Standard Form 1442, Solicitation, Offer and Award;

Table of Contents;

Certificate of Compliance.

Due date for receipt of bids is extended to September 16th, 2019 at 1:00 PM local time.

INSTRUCTIONS

Instructions for items other than those that are self-explanatory, are as follows:

Item 1 (Contract ID Code) . Insert the contract type identification code that appears in the title block of the contract being modified.

Item 3 (Effective date) .

(1)

(2)

(3)

(4)

(5)

For a solicitation amendment, change order, or administrative change, the effective date shall be the issue date of the amendment, change order, or administrative change.

For a supplemental agreement, the effective date shall be the date agreed to by the contracting parties.

For a modification issued as an initial or confirming notice of termination for the convenience of the Government, the effective date and the modification number of the confirming notice shall be the same as the effective date and modification number of the initial notice.

For a modification converting a termination for default to a termination for the convenience of the Government, the effective date shall be the same as the effective date of the termination for default.

For a modification confirming the contacting officer's determination of the amount due in settlement of a contract termination, the effective date shall be the same as the effective date of the initial decision.

(a)

(b)

(c)

(d)

(e)

(f)

Item 6 (Issued By) . Insert the name and address of the issuing office. If applicable, insert the appropriate issuing office code in the code block.

Item 8 (Name and Address of Contractor) . For modifications to a contract or order, enter the contractor's name, address, and code as shown in the original contract or order, unless changed by this or a previous modification.

Item 9, (Amendment of Solicitation No. - Dated), and 10, (Modification of Contract/Order No. - Dated ). Check the appropriate box and in the corresponding blanks insert the number and date of the original solicitation, contract, or order.

Item 12 (Accounting and Appropriation Data) .

When appropriate, indicate the impact of the modification on each affected accounting classification by inserting one of the following entries.

(2) Accounting classification Net decrease $

Include subject matter or short title of solicitation/contract where feasible.

Item 16B . The contracting officer's signature is not required on solicitation amendments. The contracting offier's signature is normally affixed last on supplemental agreements.

(i)

NOTE: If there are changes to multiple accounting classifications that cannot be placed in block 12, insert an asterisk and the words "See continuation sheet".

Item 13 . Check the appropriate box to indicate the type of modification. Insert in the corresponding blank the authority under which the modification is issued. Check whether or not contractor must sign this document. (See FAR 43.103.)

Item 14 (Description of Amendment/Modification) .

Organize amendments or modifications under the appropriate Uniform Contract Format (UCF) section headings from the applicable solicitation or contract. The UCF table of contents, however, shall not be set forth in this document Indicate the impact of the modification on the overall total contract price by inserting one of the following entries:

Total contract price increased by $

Total contract price decreased by $

Total contract price unchanged.

State reason for modification.

When removing, reinstating, or adding funds, identify the contract items and accounting classifications.

When the SF 30 is used to reflect a determination by the contracting officer of the amount due in settlement of a contract terminated for the convenience of the Government, the entry in Item 14 of the modification may be limited to --

A reference to the letter determination; and

A statement of the net amount determined to be due in settlement of the contract.

(g)

(h)

(i)

(ii)

(1)

(2)

(3)

(4)

(5)

(6)

(i)

(ii)

(iii)

STANDARD FORM 30 (REV. 10-83) BACK

(1) Accounting classification Net increase $

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NUMBER 2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED PAGE OF PAGES

IMPORTANT - The "offer" section on the reverse must be fully completed by the offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER 6. PROJECT NUMBER

7. ISSUED BY CODE 8. ADDRESS OFFER TO

9. FOR INFORMATION CALL

A. NAME B. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date):

11. The Contractor shall begin performance within calendar days and complete it within calendar days after receiving award, notice to proceed. This performance period is mandatory, negotiable. (See .)

12A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

12B. CALENDAR DAYS

YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and copies to perform the work required are due at the place specified in Item 8 by (hour) local time (date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror’s name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee is, is not required.

C. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

NSN 7540-01-155-3212

Designed using Perform Pro, WHS/DIOR, Oct 96

1442-103 STANDARD FORM 1442 (REV. 4-85) (EG)

Prescribed by GSA - FAR (48 CFR) 53.236-1(d)

W912PL19B0009 X JULY 30,2019 1 OF 652

USACE, Los Angeles District Contracting Division, West Region Branch 915 Wilshire Boulevard, Suite 930 Los Angeles, CA 90017

See Block 7

Lucia A. Carvajal 213.452.3240

CONSTRUCT ANALYTICAL LAB, AFRL, BUILDING 8523, EDWARDS AFB, CA

The basic scope entails but is not limited to the following: Construct new 7,144 square foot analytical modular lab within AFRL building 8523 (floor plan to come with solicitation). Work shall include interior fit out of plumbing, HVAC, electrical, fire suppression/fire notification, 9 exhaust hoods, installation of walls and ceilings, and associated infrastructure and connections. Construct exterior propane fuel tank and fuel lines as well. This project is design-bid-build.

This acquisition is a 100% Small Business Concern Set-Aside,refer to Contract Clause No. FAR 52.219-6 in Section 00 21 13 of the solicitation. Bids are solicited only from small business concerns. Bids received from concerns that are not small business concerns shall be considered non-responsive and will be rejected. Any award resulting from this solicitation will be made to a small business concern.

The magnitude of construction is between $5,000,000.00 and $10,000,000.00.

Bidders are advised that this project may be delayed, canceled or revised at any time during the solicitation, evaluation, selection and/or final award process.

10 * 00 73 00

X X *Section 00 73 00

X 10

0 1:00 PM

September 16th, 2019

X

OFFER (Must be fully completed by offeror)

STANDARD FORM 1442 BACK (REV. 4-85)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal or greater than the minimum requirement stated in 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGEMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation - give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20B. SIGNATURE 20C. OFFER DATE

AWARD (To be completed by Government)

21. ITEMS ACCEPTED

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24.SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 253(c) ( )

26. ADMINISTERED BY 27. PAYMENT WILL BE MADE BYCODE

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return copies to the issuing office.) Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and

(c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD. (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN

(Type or print)

30B. SIGNATURE 30C. DATE

31A. NAME OF CONTRACTING OFFICER (Type or print)

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

DUNS NO.: TAX ID NO.:

CAGE CODE NO.:

( ) - ; FAX ( ) -

See Section 00 10 00 Solicitation Contract Line Item Number (CLIN) Schedule

USACE Los Angeles District Edwards AFB Resident Office 222 N. Rosamond Blvd., Building 3759 Edwards AFB, CA 93524-0326

USACE, Finance Center

ATTN: CEFCO-AO-D

5722 Integrity Drive Millington, TN 38054-5005

AFCEC - Edwards AFB - Analytical Lab W912PL19B0009

PROJECT TABLE OF CONTENTS

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

00 00 00 TABLE OF CONTENTS

SF 1442 SOLICITATION, OFFER AND AWARD

00 01 05 CERTIFICATION PAGE

00 10 00 SOLICITATION, CONTRACT LINE ITEM NUMBER (CLIN) SCHEDULE

00 20 00 INSTRUCTIONS FOR PROCUREMENT

00 21 13 INSTRUCTIONS TO PROPOSERS

00 45 00 REPRESENTATIONS AND CERTIFICATIONS

00 70 00 CONDITIONS OF THE CONTRACT

00 73 00 SUPPLEMENTARY CONDITIONS

00 73 46 DAVIS BACON GENERAL DECISION NUMBER CA20170031 06/29/2018

CA31

DIVISION 01 - GENERAL REQUIREMENTS

01 11 00 SUMMARY OF WORK

01 14 00 WORK RESTRICTIONS

01 32 01.00 10 PROJECT SCHEDULE

01 33 00 SUBMITTAL PROCEDURES

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.00 10 QUALITY CONTROL

01 45 00.15 10 RESIDENT MANAGEMENT SYSTEM CONTRACTOR MODE (RMS CM)

01 45 35 SPECIAL INSPECTIONS

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS

01 78 00 CLOSEOUT SUBMITTALS

01 78 23 OPERATION AND MAINTENANCE DATA

DIVISION 02 - EXISTING CONDITIONS

02 41 00 DEMOLITION

DIVISION 03 - CONCRETE

03 30 00 CAST-IN-PLACE CONCRETE

DIVISION 04 - MASONRY

04 20 00 UNIT MASONRY

DIVISION 05 - METALS

05 05 23.16 STRUCTURAL WELDING

05 12 00 STRUCTURAL STEEL

05 21 00 STEEL JOIST FRAMING

05 30 00 STEEL DECKS

05 40 00 COLD-FORMED METAL FRAMING

05 50 13 MISCELLANEOUS METAL FABRICATIONS

05 51 00 METAL STAIRS

05 52 00 METAL RAILINGS

DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES

06 10 00 ROUGH CARPENTRY

06 41 16.00 10 PLASTIC-LAMINATE-CLAD ARCHITECTURAL CABINETS

PROJECT TABLE OF CONTENTS Page 1

Amendment 0001

Repair Analytical Lab, AFRL B8523 W912PL19B0009

06 61 16 SOLID SURFACING FABRICATIONS

DIVISION 07 - THERMAL AND MOISTURE PROTECTION

07 21 13 BOARD AND BLOCK INSULATION

07 21 16 MINERAL FIBER BLANKET INSULATION

07 22 00 ROOF AND DECK INSULATION

07 42 13 METAL WALL PANELS

07 54 19 POLYVINYL-CHLORIDE ROOFING

07 60 00 FLASHING AND SHEET METAL

07 81 00 SPRAY-APPLIED FIREPROOFING

07 84 00 FIRESTOPPING

07 92 00 JOINT SEALANTS

DIVISION 08 - OPENINGS

08 11 13 STEEL DOORS AND FRAMES

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

08 91 00 METAL WALL LOUVERS

DIVISION 09 - FINISHES

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 29 00 GYPSUM BOARD

09 30 10 CERAMIC, QUARRY, AND GLASS TILING

09 51 00 ACOUSTICAL CEILINGS

09 65 00 RESILIENT FLOORING

09 67 23.14 CHEMICAL RESISTANT RESINOUS FLOORING

09 90 00 PAINTS AND COATINGS

DIVISION 10 - SPECIALTIES

10 21 13 TOILET COMPARTMENTS

10 26 00 WALL AND DOOR PROTECTION

10 28 13 TOILET ACCESSORIES

DIVISION 11 - EQUIPMENT

11 53 23.16 OVERHEAD SERVICE CARRIERS

11 53 16 LABORATORY EQUIPMENT

11 53 40 LABORATORY ACCESSORIES

11 53 43 LABORATORY SERVICE FITTINGS AND FIXTURES

11 61 00 LABORATORY FUME HOODS AND RELATED PRODUCT

DIVISION 12 - FURNISHINGS

12 31 00 MANUFACTURED METAL CASEWORK

12 36 00 COUNTERTOPS

12 48 13 ENTRANCE FLOOR MATS AND FRAMES

DIVISION 13 - SPECIAL CONSTRUCTION

13 48 00 SEISMIC BRACING FOR MISCELLANEOUS EQUIPMENT

DIVISION 21 - FIRE SUPPRESSION

21 13 17.00 10 DRY PIPE SPRINKLER SYSTEM, FIRE PROTECTION

PROJECT TABLE OF CONTENTS Page 2

Repair Analytical Lab, AFRL B8523 W912PL19B0009

DIVISION 22 - PLUMBING

22 00 00 PLUMBING, GENERAL PURPOSE

22 66 53.00 40 LABORATORY CHEMICAL-WASTE AND VENT PIPING

DIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING (HVAC)

23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS

23 05 15 COMMON PIPING FOR HVAC

23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC

23 07 00 THERMAL INSULATION FOR MECHANICAL SYSTEMS

23 09 00 INSTRUMENTATION AND CONTROL FOR HVAC

23 09 23.02 BACNET DIRECT DIGITAL CONTROL FOR HVAC AND OTHER BUILDING

CONTROL SYSTEMS

23 11 25 FACILITY GAS PIPING

23 21 23 HYDRONIC PUMPS

23 23 00 REFRIGERANT PIPING

23 52 00 HEATING BOILERS

23 81 00 DECENTRALIZED UNITARY HVAC EQUIPMENT

DIVISION 26 - ELECTRICAL

26 00 00.00 20 BASIC ELECTRICAL MATERIALS AND METHODS

26 20 00 INTERIOR DISTRIBUTION SYSTEM

26 29 23 VARIABLE FREQUENCY DRIVE SYSTEMS UNDER 600 VOLTS

26 51 00 INTERIOR LIGHTING

26 56 00 EXTERIOR LIGHTING

DIVISION 27 - COMMUNICATIONS

27 10 00 BUILDING TELECOMMUNICATIONS CABLING SYSTEM

DIVISION 28 - ELECTRONIC SAFETY AND SECURITY

28 31 76 INTERIOR FIRE ALARM AND MASS NOTIFICATION SYSTEM

DIVISION 33 - UTILITIES

33 11 00 WATER UTILITY DISTRIBUTION PIPING

33 56 10 FACTORY-FABRICATED FUEL STORAGE TANKS

-- End of Project Table of Contents --

PROJECT TABLE OF CONTENTS Page 3

AFI32-1021 24 FEBRUARY 2016

AFRL ANALYTICS LAB

CERTIFICATE OF COMPLIANCE

Command: AFMC

Certificate of Compliance For Critical Planning Actions.

Base, State, Country (if Overseas): Edwards Air Force Base, California Project Title: Renovate AFRL Analytics Lab, Building 8523 Project (Automated Civil Engineering System) Number: FSPM161479

I. INSTRUCTIONS:

Place one X in the most appropriate response for each topic area to show status of compliance. When responding to a statement requiring additional data, fill in the blank with appropriate information. If none of the printed statements are appropriate, add or attach an appropriate comment. For MILCON projects, the BCE and installation commander shall sign the certificate and submit it to the MAJCOM where it will be updated and readily available to HQ USAF.

II. PLANNING:

1. Environmental Impact Analysis Process (AFI 32-7061):

X Categorical exclusion (CATEX) number A2.3.8 & A2.3.12 apply. (See AF

Form 813) Environmental Assessment/Finding of No Significant Impact: Expected completion date is .

Environmental Assessment/Finding of No Significant Impact: Signed (date).

Final EIS/Record of Decision: Expected completed date is .

Record of Decision signed on (date).

Foreign nation or protected global resource exemption number applies.

Environmental study (or review underway) under preparation.

Expected completion date is .

Environmental study (or review) completed on (date).

2. Wetlands (AFI 32-7064):

X Project is not sited in or adjacent to a wetland.

Requirements of Clean Water Act, Section 404 & 401 in progress. Estimated completion date is .

Section 401 Certification completed (date).

Section 404 Permits issued (date).

Finding of No Practicable Alternative approved via EA/FONSI or EIS/ROD on:

(date).

3. Floodplains (AFI 32-7064 and UFC 3-201-01):

X Project is not sited in a 100-year flood plain.

Project is sited in a 100-year flood plain. Requirements of EO 13690 and EO 13653 completed via Finding of No Practicable Alternative approved via EA/FONSI or EIS/ROD on: (date).

Project is sited in a 100-year flood plain. 100-year flood plain and flood mitigation design features comply with UFC 301-201-01, Civil Engineering.

2 AFI32-1021 24 FEBRUARY 2016

Renovation of facility is greater than $7.5M and is on a facility already located in a 100-year flood plain. The vulnerability of the mechanical and electrical subsystems was evaluated and necessary measures are incorporated into the project to mitigate the vulnerabilities.

4. Coastal Zone Management (AFI 32-7064):

X Project does not directly affect a state coastal zone.

Consistency determination is being developed. Estimated completion date is .

Consistency determination completed on (date).

5. Coastal Barrier Resources (AFI 32-7064):

X Project is not sited within the Coastal Barrier Resources System.

Project exempt from the Coastal Barrier Resources Act (CBRA).

Consultation with the Regional Director, United States Fish and Wildlife Service

(USFWS) and National Marine Fisheries Service (NMFS) in progress.

Estimated completion date is . Consultation with the Regional Director, USFWS, concluded (date).

6. Threatened and Endangered Species (AFI 32-7064):

Project has no potential for affecting threatened or endangered species or critical habitats.

Based on consultation with USFWS/NMFS or host nation liaison on

(date), threatened or endangered species in the vicinity of the project will not be affected.

Consultation with USFWS/NMFS underway in accordance with the Endangered Species Act.

Formal consultation with the Regional Director, USFWS completed on (date).

Biological Assessment is required. Estimated completion date is .

X Biological opinion issued by USFWS on March 11, 2014 (date). (BO 8-8-14-F-14)

7. Cultural Resources Management (AFI 32-7065):

Properties affected by project are addressed in a Programmatic Agreement that was fully executed with the State Historic Preservation Officer (SHPO) and the Advisory Council on Historic Preservation (ACHP) on (date).

Project area has not been surveyed for historic properties. Survey requirements are identified in the A-106 system and the estimated completion date is

X Project area has been surveyed and no historic properties were identified.

Notification to the SHPO was not required.

*The proposed project, Construct Analytical Laboratory, Building 8523, AFRL, is an undertaking in accordance with 36 CFR §800.16(y). As such, and in accordance with Section 106 of the National Historic Preservation Act, as amended (NHPA), Edwards AFB Cultural Resources (Base Historic Preservation Officer [BHPO] or qualified personnel under the direction or supervision of the BHPO) has reviewed the proposed undertaking and determined that the actions constituted therein will not affect historic properties. Building 8523 was constructed in 1993 and has not been evaluated for inclusion in the National Register of Historic Places as it does not meet the 50 year age requirement for consideration under the standard National Register Criteria for Evaluation. Therefore, no further review is required.

Survey identified historic properties but the project will have no effect on them; written concurrence by the SHPO is dated .

After consultation, SHPO concurred the project will have no adverse effect on historic properties by written correspondence dated .

Project will have an adverse effect on historic properties. A Memorandum of

AFI32-1021 24 FEBRUARY 2016 3

Agreement (MOA) mitigating the adverse effect was executed on (date).

Estimated date to execute the MOA is (date) or no MOA was developed and the formal comments of the Council were sought in a memo dated

Project will affect a site or property of interest to Native Americans. Appropriate Native American Tribe or Group contacted on (date).

8. Interagency and Intergovernmental Coordination for Environmental Planning :

X Coordination of proposed project with the state Single Point of Contact or other agencies is not required.

Coordination with the state Single Point of Contact is in progress. Expected date of completion is (date).

Proposed project was coordinated with the state Single Point of Contact or other agencies on (date). (Specify any other agencies.)

9. Environmental Permits (AFIs 32-7040, 7041, 7042, 7044):

No permits are required.

No permits required, but regulatory agency notification required prior to construction (e.g., underground storage tank removals) X The following permits are required prior to construction: (List the construction and operating permits).

1. AFTC IMT 5926 (Digging Permit)

2. Air Permits (for non-mobile emission sources greater than 50 BHP)

3. AFTC Form 5852, permit for Industrial Wastewater Discharge Edwards AFB

4. AF Form 592 (Hot Works Permit)

10. Potentially Regulated Substances at Existing Sites (AFIs 32-1052, 7042)

a. Asbestos:

Not present Survey underway X Present (Describe mitigation, or state why mitigation is not necessary.)

*Present in within the facility depending on what will be disturbed. Prior to any inspection(s), the contractor shall obtain these records and consult with EAFB Asbestos Office personnel regarding site conditions and EAFB requirements. All existing building materials that are not unpainted metal, glass, plastic or wood are presumed to contain ACM. Below is information based on sampling that has been done thus far.

Asbestos has been identified in the black floor tile mastic – 1 of 4 samples is asbestos.

Walls samples (9) are all negative. Floor tile and linoleum samples are negative (with limited sampling). Drop ceiling tiles are negative. Roof has a newer roof that is un-sampled and any old roof beneath may need sampling/inspection. Again – floor tile mastic (black) has asbestos identified in one sample.

It is a metal sided building. Tested/inspected in 2019, no suspect asbestos observed or identified.

**The asbestos floor tiles are not in the scope of work. Based on proposed project activities no asbestos will be disturbed.

b. Lead-Based Paint:

Not present at site for new facility Amendment 0001

4 AFI32-1021 24 FEBRUARY 2016

Survey underway X Present (Describe mitigation, or state why mitigation is not necessary.)

*The proponent/contractors shall accomplish a survey and an abatement plan, if needed. Prior to any renovation, any loose, peeling, or flaking lead-based paint must be removed. All painted/coated surfaces are considered to contain lead until proven otherwise. Paint will be removed if paint is chipping/flaking or where intact with the surface, paint will be encapsulated. Lead remediation will/may occur in areas affected by renovation; all applicable federal, state and local rules and regulations, to include Edwards AFB lead/asbestos specifications, shall apply. For any contractor lead/asbestos inspection; Inspections and associated report(s) shall be in accordance with applicable federal, state and local rules, regulations and guidance.

Local rules include but is not limited to the EAFB Asbestos Operating Plan (AOP) which provides details on inspections and reports. EAFB does have some asbestos / lead sample records. Prior to any inspection(s), the contractor shall obtain these records and consult with EAFB Asbestos Office personnel regarding site conditions and EAFB requirements. Below is information based on sampling that has been done thus far.

5 samples (1 from a floor and 4 from vessels/equipment), 2 from equipment have lead at 0.120% by weight, the others are below the reportable limit (BRL).

Depending on what will be disturbed, additional sampling may be required. 2019 exterior wall samples are mostly BRL, with one of three samples detecting low lead in exterior wall coating at 0.014% by weight.

** Based on the location of proposed project activities no lead will be disturbed.

Should the scope of work change, lead may be disturbed and materials should be assessed.

c. Ozone depleting substance:

X Not present Survey underway Present (Describe mitigation, or state why mitigation is not necessary.)

d. Polychlorinated biphenyls (PCBs):

Not present Survey underway X Present (Describe mitigation, or state why mitigation is not necessary.)

*All existing facilities are presumed to have PCB light ballasts. Electrical fixtures/ballasts scheduled for removal must be checked (or sampled as necessary) for PCBs. Coordination with Environmental Management shall be required for PCB sampling, removal, storage, and disposal activities. PCB shipping documents, if required, must be completed in accordance with 22 CCR, Division 4.5; 49 CFR Parts 100 to 185; and 40 CFR Parts 750 and 761 and Edwards AFB Hazardous Waste management Plan requirements (as applicable).

**Based on the proposed project activities no ballasts are being removed; therefore, no PCBs will be disturbed.

e. Radon:

Not present Survey underway X Present (Describe mitigation, or state why mitigation is not necessary.)

* Based on the 1987 Radon Assessment and Mitigation Program (RAMP) radon inspection results, Edwards AFB is classified as a medium risk installation for radon.

As such, AFI 48-148, Ionizing Radiation Protection, dated 20 November 2014, section 2.22.3, directs us to "Incorporate radon reduction measures in the construction of new facilities at medium and high risk installations as required in current DoD and AF policy." Refer to the AFI for further guidance.

**No new facilities are being constructed in this project; therefore, radon reduction measures do not apply to interior renovation. Amendment 0001

AFI32-1021 24 FEBRUARY 2016 5

f. Other known hazardous or toxic substances and pollutants (e.g., contaminated soils):

Not present Survey underway X Present (Describe mitigation, or state why mitigation is not necessary.)

* Refer to #12 below.

11. Radon at New Construction Sites:

Not Present X Present (Describe mitigation, or state why mitigation is not necessary.)

* Based on the 1987 RAMP radon inspection results, Edwards AFB is classified as a medium risk installation for radon. As such, AFI 48-148, Ionizing Radiation Protection, dated 20 November 2014, section 2.22.3, directs us to "Incorporate radon reduction measures in the construction of new facilities at medium and high risk installations as required in current DoD and AF policy." Refer to the AFI for further guidance.

12. Environmental Restoration Program:

Facility is not sited on or near an ERP site.

X Facility is sited near numerous ERP sites starting approximately 0-500 feet away.

*There are several ERP sites near Building 8523. The following is a list of sites that are near Building 8523sites: ERP Sites 35, 40, 313, and 359. If stained or fuel odor is encountered the contractor should notify Environmental Management. ERP wells and equipment are in the area and the contractor should exercise caution not to damage existing groundwater monitoring wells. (See ERP Map) X Facility is on an ERP site.

*Building 8523 is within AOC Site 141. Activities within this ERP site requires coordination with the ERP AFCEC Installation Support Team Manager, Nash Saleh, to ensure that the project shall not interfere with ERP activities or ERP wells and equipment. Solvent related plumes are located 50 feet north of the building. The nearest monitoring well is located approximately 400 feet to the south along with two other wells farther south. The contractor must exercise caution not to damage these and other groundwater monitoring wells in the area. Contaminated groundwater not anticipated to be encountered based on planned depth of excavation. (See ERP Map) The site is projected to be remediated and/or closed out on (date), prior to commencement of construction activities.

The nature of the site contamination does not preclude the type of construction activity proposed.

There is a Compliance Agreement (CA) associated with this site and this project does not hinder the ability to meet the requirements of the CA.

A Remedial Investigation Feasibility Study was completed on (date) to accurately delineate the extent of the contamination.

Cost of remedial action is included as part of MILCON project.

13. Air Pollutants (AFI 32-7040):

a. Generation:

Will not be generated by the operation or construction of this facility.

X Will be generated by the renovation of this facility. Describe type and amount of substances expected to be generated, existing control systems, and the need for additional controls. Pollutants will be generated by construction equipment and mitigated by appropriate control systems integrated onto engines in accordance with State law.

*A short-term degradation in air quality will be experienced during construction/renovation activities; however, considering the small amount of square footage being disturbed along with the brief duration of construction/renovation activities, the potential impacts on ambient air quality are Amendment 0001

6 AFI32-1021 24 FEBRUARY 2016

anticipated to be minimal. Hazardous Air Pollutants (HAPs) may also be generated during construction/renovation (i.e., painting operations, generators, etc.); however, compliance with all Clean Air Act Title III, Hazardous Air Pollutant requirements or any more stringent State or local requirements would be required. Fugitive dust emissions will be generated by construction/renovation activities. However, fugitive dust emissions are not likely to exceed the NAAQS or CAAQS. Standard practices for construction, including dust suppression; ensuring any internal combustion engines subject to NESHAP that will be used are permitted by Eastern Kern Air Pollution Control District (EKAPCD); all debris will be covered during transport; and compliance with all applicable EKAPCD rules and regulations will reduce impacts to air quality.

b. Conformity:

Conformity analysis required.

X Conformity analysis not required.

* Air emissions are de minimis.

14. Water Pollutants (AFI 32-7041):

Facility will not generate water pollutants.

Facility construction will not cause soil erosion.

X Facility will generate water pollutants. Describe type and amount along with minimization, treatment, and disposal plan.

* This facility will routinely generate small quantities of post-test wastewater that will need to be containerized and properly disposed of. Buildings that generate industrial wastewater are required to process an AFFTC Form 5852, Permit for Industrial Wastewater Discharge, Edward AFB, California, prior to discharging any wastewater. The permit must be approved by the Base Civil Engineer (BCE), EM, and Bioenvironmental Engineering, and is applicable to all dischargers of industrial wastewater. Air Force Flight Test Center Form 5852 ensures compliance with required hazardous materials handling protocols, and should remove significant impacts caused by industrial wastewater to the WWTPs.

Facility construction will cause erosion and require an erosion control plan.

15. Solid and Hazardous Wastes (AFIs 32-7042):

X Facility will not be used for managing solid or hazardous wastes.

Facility will be for managing solid or hazardous wastes.

16. Underground Storage Tanks (AFI 32-7044) (Check all that apply):

X No underground storage tanks are involved.

New underground storage tanks will be installed.

Existing tanks on the project site will be removed.

Regulatory agency was notified on (date).

Contamination exists.

Cost of contamination clean-up is included as part of MILCON project.

Contamination does not exist.

Contamination unknown.

Existing tanks on the project site will be retained.

Contamination exists.

Contamination does not exist.

Contamination unknown.

AFI32-1021 24 FEBRUARY 2016 7

17. Air Installation Compatible Use Zone (AFI 32-7063):

X Facility is sited within acceptable noise level according to the Air Installation

Compatible Use Zone Study. No noise level reduction is required.

Facility is not sited in compliance with Air Installation Compatible Use Zone

Study. Noise level reduction of will be provided in design and construction.

18. Installation Development Plan (AFI 32-7062):

X Facility is sited in accordance with the Installation Development Plan and is within a compatible land use area.

Facility is not sited in accordance with the Installation Development Plan and is not within a compatible land use area for the following reason:

19. Airfield Clearance Criteria (UFC 03-260-01):

Facility is in compliance with airfield clearance criteria, including clear zone, accident potential zones, frangibility requirements, and airfield airspace (height obstruction) criteria and poses no potential threat to flight safety.

A request for waiver to airfield/air space clearance criteria is being prepared.

Expected completion date is .

A temporary waiver for construction activity in the airfield vicinity was approved on (date).

A permanent waiver of airfield/air space clearance criteria was obtained on (date).

20. Air Space Use:

Project does not affect air space use and does not require submittal of FAA Form

7460-1 to the Regional Office of the FAA.

Project sent to Regional FAA on (date). Obstruction marking and lighting recommendations are included in the project.

21. Explosives Quantity/Distance Siting and Safety Clearance Criteria:

a. Projects (new construction, facility modification, or change in use) involving explosives storage or handling.

Explosives safety siting approval obtained on (date).

Request for explosive safety siting approval sent to MAJCOM on

(date). Expected approval date is .

Request for Waiver/Exemption sent to MAJCOM on (date).

Expected approval date is .

b. Projects not involving explosives (new construction, facility modification, or change in use).

Project is not sited within explosives clear zones.

Explosives safety siting approval obtained on (date).

Request for explosive safety siting approval sent to MAJCOM on

(date). Expected approval date is .

Request for Waiver/Exemption sent to MAJCOM on (date).

Expected approval date is .

8 AFI32-1021 24 FEBRUARY 2016

22. Air Base Survivability, Conventional Hardening, Chemical Protection Levels and Priorities, Camouflage, Concealment and Deception:

Project does not affect air base operability Facility is sited or constructed in compliance with criteria contained in WMP-1

Waiver or exemption required; request submitted to MAJCOM Civil Engineering Readiness Office, in accordance with WMP-1 on (date).

Waiver or exemption granted on _ (date).

23. Allowance for the Physically Handicapped:

Project provides all design features for handicapped.

Project provides access and limited features.

Project provides access but no other features.

Design features for handicapped are not required.

Design features will not be provided for the following reason: .

24. Real Estate Requirements (AFI 32-9001, 32-9005 and UFC 1-300-08):

Project does not require acquisition of real estate interest.

Project requires acquisition of a real estate interest over $750,000.

Land interest is to be acquired through minor land authority.

Other (explain): .

25. Antiterrorism/Force Protection: Antiterrorism/force protection measures included in this project are based on a completed installation terrorist threat assessment and a completed Command or Joint Staff Installation Vulnerability Assessment.

Antiterrorism/force protection measures included in this project satisfy requirements established by a completed installation Physical Security and Force Protection Plan (DoDI 2000.16. Standard 4).

Project meets or exceeds the requirements of DoD Antiterrorism Construction Standards.

26. Excess Space:

Excess space is not available to satisfy the requirement.

27. Temporary Facilities Incident to Construction:

Temporary facilities are not required for this project.

Temporary facilities are required for this project and will be demolished or removed upon completion.

28. Communications and Information Support:

The communications equipment, information technology systems, pre-wiring costs, and other requirements for this project have been identified and are included in the project cost estimate and all other applicable project documents. A copy of the communication cost estimate is attached to the DD Form 1391.

29. Sustainable Design and Development:

Project meets the requirements of UFC 1-200-02.

Project meets the requirements of UFC 3-210-10.

Project will qualify for third-party green building certification (Leadership in

Energy and Environmental Design (LEED) or equivalent).

AFI32-1021 24 FEBRUARY 2016 9

30. Seismic Considerations:

Seismic planning and design complies with UFC 03-310-04.

Seismic evaluations performed for existing facilities.

Seismic deficiencies identified and mitigations for existing buildings including the nonstructural components are mitigated by project completion.

31. Joint Use Certification (include selection on DD Form 1391):

Mission requirements, operational considerations, and location are incompatible with use by other components.

This is an installation utility/infrastructure project, and does not qualify for joint use at this location. However, all tenants on this installation are benefited by this project.

This facility can be used by other components on an as available basis; however, the scope of the project is based on Air Force requirements.

This facility is programmed for joint use with (identify the component the facility is jointly used with); however, it is fully funded by the Air Force.

The facility is programmed for joint use with (identify the component(s) the facility is jointly used with) and is conjunctively funded by (identify the participating component(s)).

32. Sensitive Compartmented Information Facilities (SCIF) Not Applicable Site Security Manager/Accrediting Official has provided security requirements, including construction standards and construction oversight (e.g. escorts, construction surveillance technicians, cleared American guards).

Estimated costs of SCIF construction, escorts and construction surveillance technicians, including any support to be provided by the installation that can be identified as additional costs that would not have been incurred were it not for the project, are included.

Waiver is approved for any requirements that exceed a standard (Technical Specifications for Construction and Management of Sensitive Compartmented Information Facilities, Version 1.2, April 23, 2012 and ICD 705, Section D.4)

I concur with the above statements.

Base Civil Engineer (date) Installation Commander (date)