W912PL-18-R-0002_FIO_AdditionalAsbestosTestingReport.pdf

Approved by:

Approved Signatory Renee Luna-Trepczynski

Report for:

Mr. Ritchie Bump, EIT The Green Way Environmental Group 3370 N. Hayden Rd. #123-187 Scottsdale, AZ 85251

Regarding: Project: 01-17-0303 Luke AFB; Buildg 750 Update

EML ID: 1830187

All samples were received in acceptable condition unless noted in the Report Comments portion in the body of the report. The results relate only to the items tested. The results include an inherent uncertainty of measurement associated with estimating percentages by polarized light microscopy. Measurement uncertainty data for sample results with >1% asbestos concentration can be provided when requested.

EMLab P&K ("the Company") shall have no liability to the client or the client's customer with respect to decisions or recommendations made, actions taken or courses of conduct implemented by either the client or the client's customer as a result of or based upon the Test Results. In no event shall the Company be liable to the client with respect to the Test Results except for the Company's own willful misconduct or gross negligence nor shall the Company be liable for incidental or consequential damages or lost profits or revenues to the fullest extent such liability may be disclaimed by law, even if the Company has been advised of the possibility of such damages, lost profits or lost revenues. In no event shall the Company's liability with respect to the Test Results exceed the amount paid to the Company by the client therefor.

Dates of Analysis:

Asbestos PLM: 11-10-2017

Service SOPs: Asbestos PLM (EPA Methods 600/R-93/116 & 600/M4-82-020, SOP EM-AS-S-1267)

EMLab ID: 1830187, Page 1 of 14Aerotech Laboratories, Inc

EMLab P&K 1501 West Knudsen Drive, Phoenix, AZ 85027

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Total Samples Submitted: 47 Total Samples Analyzed: 47

Total Samples with Layer Asbestos Content > 1%: 6

Location: 1A, Popcorn Txt Lab ID-Version‡: 8570455-1

Sample Layers Asbestos Content White Popcorn Ceiling with White Paint ND

Sample Composite Homogeneity: Good

Location: 1B, Popcorn Txt Lab ID-Version‡: 8570456-1

Sample Layers Asbestos Content White Popcorn Ceiling with White Paint ND

Sample Composite Homogeneity: Good

Location: 2A, Ext Stucco (Swirl) Lab ID-Version‡: 8570457-1

Sample Layers Asbestos Content White Stucco with White Paint ND

Sample Composite Homogeneity: Good

Location: 2B, Ext Stucco (Swirl) Lab ID-Version‡: 8570458-1

Sample Layers Asbestos Content White Stucco with White Paint ND

Sample Composite Homogeneity: Good

EMLab ID: 1830187, Page 2 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x".

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 3A, 12"x12" VCT/Mastic (Off White/Brown) Lab ID-Version‡: 8570459-1

Sample Layers Asbestos Content White Floor Tile ND Yellow Mastic ND

Sample Composite Homogeneity: Moderate

Location: 3B, 12"x12" VCT/Mastic (Off White/Brown) Lab ID-Version‡: 8570460-1

Sample Layers Asbestos Content White Floor Tile ND Yellow Mastic ND

Sample Composite Homogeneity: Moderate

Location: 4A, 12"x12" VCT/M Lab ID-Version‡: 8570461-1

Sample Layers Asbestos Content White Floor Tile ND Yellow Mastic ND

Gray Cementitious Material ND Sample Composite Homogeneity: Poor

Location: 4B, 12"x12" VCT/M Lab ID-Version‡: 8570462-1

Sample Layers Asbestos Content White Floor Tile ND Yellow Mastic ND

Gray Cementitious Material ND Sample Composite Homogeneity: Poor

EMLab ID: 1830187, Page 3 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 5A, Tan VCT/Mastic Lab ID-Version‡: 8570463-1

Sample Layers Asbestos Content Yellow Mastic ND

Black Non-Fibrous Material ND Yellow Mastic ND

Gray Cementitious Material ND Tan Floor Tile 8% Chrysotile Black Mastic 3% Chrysotile

Gray Cementitious Material ND Composite Non-Asbestos Content: 2% Synthetic Fibers Sample Composite Homogeneity: Poor

Location: 5B, Tan VCT/Mastic Lab ID-Version‡: 8570464-1

Sample Layers Asbestos Content Yellow Mastic ND

Black Non-Fibrous Material ND Yellow Mastic ND

Gray Cementitious Material ND Tan Floor Tile 8% Chrysotile Black Mastic 3% Chrysotile

Gray Cementitious Material ND White Non-Fibrous Material ND

Composite Non-Asbestos Content: 2% Synthetic Fibers Sample Composite Homogeneity: Poor

Location: 6A, VCT/M Under Carpet Lab ID-Version‡: 8570465-1

Sample Layers Asbestos Content Yellow Mastic ND

Gray Foam ND Tan Mastic ND

Brown Floor Tile 2% Chrysotile Black Mastic 3% Chrysotile

Sample Composite Homogeneity: Poor

EMLab ID: 1830187, Page 4 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 6B, VCT/M Under Carpet Lab ID-Version‡: 8570466-1

Sample Layers Asbestos Content Yellow Mastic ND

Gray Foam ND Tan Mastic ND

Gray Floor Tile 5% Chrysotile Black Mastic 2% Chrysotile

Sample Composite Homogeneity: Poor

EMLab ID: 1830187, Page 5 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 7A, VCT/M Under Carpet Lab ID-Version‡: 8570467-1

Sample Layers Asbestos Content Yellow Mastic ND

Gray Foam ND Tan Mastic ND

Black Floor Tile 3% Chrysotile Black Mastic 2% Chrysotile

Sample Composite Homogeneity: Poor

Location: 7B, VCT/M Under Carpet Lab ID-Version‡: 8570468-1

Sample Layers Asbestos Content Yellow Mastic ND

Gray Foam ND Tan Mastic ND

Black Floor Tile 4% Chrysotile Black Mastic 5% Chrysotile

Sample Composite Homogeneity: Poor

Location: 8A, Tan VSF/Mastic Lab ID-Version‡: 8570469-1

Sample Layers Asbestos Content Tan Sheet Flooring ND

Yellow Mastic ND Sample Composite Homogeneity: Good

Location: 8B, Tan VSF/Mastic Lab ID-Version‡: 8570470-1

Sample Layers Asbestos Content Tan Sheet Flooring ND

Yellow Mastic ND Sample Composite Homogeneity: Good

EMLab ID: 1830187, Page 6 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 8C, Tan VSF/Mastic Lab ID-Version‡: 8570471-1

Sample Layers Asbestos Content Tan Sheet Flooring ND

Yellow Mastic ND Sample Composite Homogeneity: Good

Location: 9A, Brown Slump Block + Mortar Lab ID-Version‡: 8570472-1

Sample Layers Asbestos Content Brown Block ND Gray Mortar ND

Sample Composite Homogeneity: Moderate

Location: 9B, Brown Slump Block + Mortar Lab ID-Version‡: 8570473-1

Sample Layers Asbestos Content Brown Block ND Gray Mortar ND

Sample Composite Homogeneity: Moderate

Location: 9C, Brown Slump Block + Mortar Lab ID-Version‡: 8570474-1

Sample Layers Asbestos Content Brown Block ND Gray Mortar ND

Sample Composite Homogeneity: Moderate

EMLab ID: 1830187, Page 7 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 10A, Clay Tile Roof System Lab ID-Version‡: 8570475-1

Sample Layers Asbestos Content Red Tile ND

Red Cementitious Material ND Sample Composite Homogeneity: Moderate

Location: 10B, Clay Tile Roof System Lab ID-Version‡: 8570476-1

Sample Layers Asbestos Content Red Tile ND

Red Cementitious Material ND Sample Composite Homogeneity: Moderate

Location: 10C, Clay Tile Roof System Lab ID-Version‡: 8570477-1

Sample Layers Asbestos Content Red Tile ND

Red Cementitious Material ND Sample Composite Homogeneity: Moderate

Location: 11A, Underlayment (Shingle Paper) Lab ID-Version‡: 8570478-1

Sample Layers Asbestos Content Black Roofing Shingle with White Pebbles ND

Black Roofing Material Underlayment ND Composite Non-Asbestos Content: 3% Glass Fibers

3% Synthetic Fibers Sample Composite Homogeneity: Moderate

EMLab ID: 1830187, Page 8 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 11B, Underlayment (Shingle Paper) Lab ID-Version‡: 8570479-1

Sample Layers Asbestos Content Black Roofing Shingle with White Pebbles ND

Black Roofing Material Underlayment ND Composite Non-Asbestos Content: 3% Glass Fibers

3% Synthetic Fibers Sample Composite Homogeneity: Moderate

Location: 11C, Underlayment (Shingle Paper) Lab ID-Version‡: 8570480-1

Sample Layers Asbestos Content Black Roofing Shingle with White Pebbles ND

Black Roofing Material Underlayment ND Composite Non-Asbestos Content: 3% Glass Fibers

3% Synthetic Fibers Sample Composite Homogeneity: Moderate

Location: 12A, C/C Slab Lab ID-Version‡: 8570481-1

Sample Layers Asbestos Content Gray Concrete with Off-White Paint ND

Sample Composite Homogeneity: Good

Location: 12B, C/C Slab Lab ID-Version‡: 8570482-1

Sample Layers Asbestos Content Gray Concrete with Off-White Paint ND

Sample Composite Homogeneity: Good

EMLab ID: 1830187, Page 9 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 12C, C/C Slab Lab ID-Version‡: 8570483-1

Sample Layers Asbestos Content Gray Concrete with Off-White Paint ND

Sample Composite Homogeneity: Good

Location: 13A, Patio C/C + Slt Lab ID-Version‡: 8570484-1

Sample Layers Asbestos Content Gray Concrete ND Gray Sealant ND

Sample Composite Homogeneity: Moderate

Location: 13B, Patio C/C + Slt Lab ID-Version‡: 8570485-1

Sample Layers Asbestos Content Gray Concrete ND Gray Sealant ND

Sample Composite Homogeneity: Moderate

Location: 13C, Patio C/C + Slt Lab ID-Version‡: 8570486-1

Sample Layers Asbestos Content Gray Concrete ND Gray Sealant ND

Sample Composite Homogeneity: Moderate

EMLab ID: 1830187, Page 10 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 14A, T Dt DW System Lab ID-Version‡: 8570487-1

Sample Layers Asbestos Content White Texture with Tan Paint ND

Brown Drywall with Brown/Green Paper ND Composite Non-Asbestos Content: 10% Cellulose Sample Composite Homogeneity: Moderate

Location: 14B, T Dt DW System Lab ID-Version‡: 8570488-1

Sample Layers Asbestos Content White Texture with Tan Paint ND

Brown Drywall with Brown/Green Paper ND Composite Non-Asbestos Content: 10% Cellulose Sample Composite Homogeneity: Moderate

Location: 14C, T Dt DW System Lab ID-Version‡: 8570489-1

Sample Layers Asbestos Content White Texture with Tan Paint ND

Brown Drywall with Brown/Green Paper ND Composite Non-Asbestos Content: 10% Cellulose Sample Composite Homogeneity: Moderate

Location: 15A, Unf DW Deck Lab ID-Version‡: 8570490-1

Sample Layers Asbestos Content White Drywall with Brown Paper ND

Composite Non-Asbestos Content: 10% Cellulose Sample Composite Homogeneity: Moderate

EMLab ID: 1830187, Page 11 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 15B, Unf DW Deck Lab ID-Version‡: 8570491-1

Sample Layers Asbestos Content White Drywall with Brown Paper ND

Composite Non-Asbestos Content: 10% Cellulose Sample Composite Homogeneity: Moderate

Location: 15C, Unf DW Deck Lab ID-Version‡: 8570492-1

Sample Layers Asbestos Content White Drywall with Brown Paper ND

Composite Non-Asbestos Content: 10% Cellulose Sample Composite Homogeneity: Moderate

Location: 16A, 12"x12" Tan CT/G Lab ID-Version‡: 8570493-1

Sample Layers Asbestos Content Tan Ceramic Tile ND

Tan Grout ND Gray Mortar ND

Sample Composite Homogeneity: Poor

Location: 16B, 12"x12" Tan CT/G Lab ID-Version‡: 8570494-1

Sample Layers Asbestos Content Tan Ceramic Tile ND

Tan Grout ND Gray Mortar ND

Sample Composite Homogeneity: Poor

EMLab ID: 1830187, Page 12 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 16C, 12"x12" Tan CT/G Lab ID-Version‡: 8570495-1

Sample Layers Asbestos Content Tan Ceramic Tile ND

Tan Grout ND Gray Mortar ND

Sample Composite Homogeneity: Poor

Location: 17A, 4"x4" CT/Grout Lab ID-Version‡: 8570496-1

Sample Layers Asbestos Content Tan Ceramic Tile ND

Tan Grout ND Gray Mortar ND

Sample Composite Homogeneity: Poor

Location: 17B, 4"x4" CT/Grout Lab ID-Version‡: 8570497-1

Sample Layers Asbestos Content Tan Ceramic Tile ND

Tan Grout ND Gray Mortar ND

Sample Composite Homogeneity: Poor

Location: 17C, 4"x4" CT/Grout Lab ID-Version‡: 8570498-1

Sample Layers Asbestos Content Tan Ceramic Tile ND

Tan Grout ND Gray Mortar ND

Sample Composite Homogeneity: Poor

EMLab ID: 1830187, Page 13 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

(800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: The Green Way Environmental Group C/O: Mr. Ritchie Bump, EIT Re: 01-17-0303 Luke AFB; Buildg 750 Update

Date of Receipt: 11-09-2017 Date of Report: 11-10-2017

ASBESTOS PLM REPORT: EPA-600/M4-82-020 & EPA METHOD 600/R-93-116

Location: 18A, Terrazo Floor Lab ID-Version‡: 8570499-1

Sample Layers Asbestos Content Multicolored Flooring ND

Sample Composite Homogeneity: Good

Location: 18B, Terrazo Floor Lab ID-Version‡: 8570500-1

Sample Layers Asbestos Content Multicolored Flooring ND

Sample Composite Homogeneity: Good

Location: 18C, Terrazo Floor Lab ID-Version‡: 8570501-1

Sample Layers Asbestos Content Multicolored Flooring ND

Sample Composite Homogeneity: Good

EMLab ID: 1830187, Page 14 of 14Aerotech Laboratories, Inc

The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.

Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.

‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is

The Green Way Environmental Group, LLC

Building 750

Luke Air Force Base, AZ

SUMMARY OF ACMS - BUILDING 750 (LUKE AFB)

Building/Area Name ACM Identified Category of ACM Location *Estimated Quantity NOTES

Interior ACMs Identified Pipe Fittings (Mechanical Rooms and Possibly in Plenum) RACM Interior ABATED IN MECH. ROOMS

Nothing in Mech Rooms, POSSIBLY PRESENT

IN PLENUM AREAS

Black Mastic Beneath Carpet Cat. I (Non-Friable) East Side of Aviators Attic ~400 SF Under Carpet

VCT and Black Mastic Beneath Carpet Cat. I (Non-Friable) Room with Fireplace in COMM AREA ~400 SF Under Carpet

VCT and Black Mastic Beneath Carpet Cat. I (Non-Friable) North Side Office Area ~650 SF Under Carpet

VCT and Black Mastic Beneath Carpet Cat. I (Non-Friable) Southwest COMM Computer Room ~780 SF Under Carpet

VCT and Black Mastic Cat. I (Non-Friable) SEC Womens Restroom ~160 SF OPEN VCT/MASTIC

Exterior ACMs Identified White Roofing Tar (likely black/gray underneath) Cat. I (Non-Friable) Roof Penetrations/Edges ~75 SF Roof System (Where Present)

Gray Roofing Tar Cat. I (Non-Friable) Roof Penetrations/Edges ~180 SF Roof System (Where Present)

Transite Panels (Exterior Awning & Interior Plenum) Cat. II (Non-Friable) Exterior Awning and Plenums Areas

~2,025 SF (1,350

X 1.5 feet)

Exterior Overhangs and Plenum (Left in Place when Buidling was Renovated)

UTQ = Unable to Quantify

*THE QUANTITIES AND IDENTIFIED ACM IS BASED ON THE LIMITED SAMPLING CONDUCTED Nov 8 & 9, 2017 & From 1999 Survey (Environomics)

*TSI possibly exists elsewhere in Pipe Chases, above ceiling plenums and other inaccessible areas of entire site

Ritchie Bump

AHERA Building Inspector Refresher

November 07, 2017

4646-352-110717

7-Nov-2017

07-Nov-2018

Powered by TCPDF (www.tcpdf.org) http://www.tcpdf.org