Amendment 0001_W912P820R0071.pdf

W42HEM02904203

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The above numbered solicitation for Construction Management Services, CEMVN is hereby amended to replace Sections B, C, and L located in the published solicitation, in their entirety, w ith the revised Sections B, C, and L provided herein this amendment. This amendment also revises the Contracting Officer Representative assigned to this requirement and updates a clause as show n in the continuation pages.

The response date for proposal submissions, as w ell as the Q&A session timeframe remains unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 52

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 23-Dec-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912P820R0071

X 9B. DATED (SEE ITEM 11)

17-Dec-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

23-Dec-2020

CODE

USACE, CONTRACTING DIVISION

ATTN: CEMVN-CT, ROOM 172

7400 LEAKE AVE.

NEW ORLEANS LA 70118-3651

W912P8 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE:

SUMMARY OF CHANGES

CLAUSE/PROVISION CHANGE:

The following provision/clause located in the solicitation has been revised to read as follows:

52.216-18 ORDERING. (AUG 2020)

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from for a period of five (5) years after contract award or until the contract ceiling is met, whichever is first. The Contracting Officer may exercise, at his discretion, to use of the 6-month optional period, if deemed necessary.

(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.

(c) A delivery order or task order is considered "issued" when--

(1) If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail;

(2) If sent by fax, the Government transmits the order to the Contractor's fax number; or

(3) If sent electronically, the Government either--

(i) Posts a copy of the delivery order or task order to a Government document access system, and notice is sent to the Contractor; or

(ii) Distributes the delivery order or task order via email to the Contractor's email address.

(d) Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract.

(End of clause)

Amendment 0001

Section G-Contraction Administration

G.4 QUALITY ASSURANCE EVALUATOR

The Contracting Officer Representative (COR) for this Indefinite Delivery Indefinite Quantity Contract has been changed to:

Adam Brymer, Supervisory Civil Engineer, USACE, 7400 Leake Avenue, New Orleans , LA 70118. Adam.W.Brymer@usace.army.mil, 504-862-1939.

CONSTRUCTION MANAGEMENT SERVICES

YEAR 1

ITEM PAY ITEM EST UNIT UNIT EST

AMT

NO. QTY PRICE

0001AA QAR II (S.T.) 200 HR

0001AB QAR II (O.T.) 20 HR

0001AC QAR II (S.D.) 2 HR

0002AA QAR III (S.T.) 20,000 HR

0002AB QAR III (O.T.) 2,000 HR

0002AC QAR III (S.D.) 200 HR

0003AA QAR V (S.T.) 1,000 HR

0003AB QAR V (O.T.) 100 HR

0003AC QAR V (S.D.) 10 HR

0004AA SUPV CONST REP (S.T.) 1,000 HR

0004AB SUPV CONST REP (O.T.) 100 HR

0004AC SUPV CONST REP (S.D.) 10 HR

0005AA QUALITY ASSURANCE MANAGER (S.T.) 200 HR

0005AB QUALITY ASSURANCE MANAGER (O.T.) 20 HR

0005AC QUALITY ASSURANCE MANAGER (S.D.) 2 HR

0006AA SECRETARY (S.T.) 1,000 HR

0006AB SECRETARY (O.T.) 100 HR

0006AC SECRETARY (S.D.) 10 HR

0007AA SCHEDULER (S.T.) 1,000 HR

0007AB SCHEDULER (O.T.) 100 HR

0007AC SCHEDULER (S.D.) 10 HR

0008AA EXPERT SCHEDULER (S.T.) 200 HR

0008AB EXPERT SCHEDULER (O.T.) 20 HR

0008AC EXPERT SCHEDULER (S.D.) 2 HR

0009AA COST ESTIMATOR (S.T.) 4,000 HR

0009AB COST ESTIMATOR (O.T.) 400 HR

0009AC COST ESTIMATOR (S.D.) 40 HR

0010AA PROGRAM ANALYST (S.T.) 200 HR

0010AB PROGRAM ANALYST (O.T.) 20 HR

0010AC PROGRAM ANALYST (S.D.) 2 HR

0011AA CONST MANAGER (S.T.) 1,000 HR

0011AB CONST MANAGER (O.T.) 100 HR

0011AC CONST MANAGER (S.D.) 10 HR

0012AA PROJECT ENGINEER (S.T.) 4,000 HR

0012AB PROJECT ENGINEER (O.T.) 400 HR

0012AC PROJECT ENGINEER (S.D.) 40 HR

0013AA SENIOR ENGINEER (S.T.) 1,000 HR

0013AB SENIOR ENGINEER (O.T.) 100 HR

0013AC SENIOR ENGINEER (S.D.) 10 HR

0014AA CIVIL ENGR TECH I (S.T.) 400 HR

0014AB CIVIL ENGR TECH I (O.T.) 40 HR

0014AC CIVIL ENGR TECH I (S.D.) 4 HR

0015AA CIVIL ENGR TECH II (S.T.) 400 HR

0015AB CIVIL ENGR TECH II (O.T.) 40 HR

0015AC CIVIL ENGR TECH II (S.D.) 4 HR

0016 4X2 PICKUP TRUCK 6,000 DA

0017 4X4 PICKUP TRUCK 100 DA

0018 ADDITIONAL MILEAGE TBD FTR

0019AA PER DIEM LODGING TBD FTR

0019AB PER DIEM MEALS 500 DA

0020 SPECIAL EQUIPMENT TBD DA

0021 SPECIAL TESTING TBD TBN

SECTION B: Supplies or Services and Prices

AMENDMENT OOO1

CONCRETE INSPECTION & TESTING

0022 ACI LEVEL 1 FIELD CONCRETE TECH 100 HR

0023 REINFORCED CONCRETE SPECIAL INSP 50 HR

0024 PRESTRESSED CONCRETE SPECIAL INSP 50 HR

0025 ASTM C 117 MATLS FINER #200 SIEVE WASH 10 EA

0026 ASTM C 136 SIEVE ANALYS FINE & COARSE AGGREGATES 10 EA

0027 ASTM C 190 COMPRESSIVE STRENGTH MORTARS CUBE 10 EA

0028 ASTM C 39 COMPRESSIVE STRENGTH CONCRETE SPEC 10 EA

SOILS INSPECTION & TESTING

0029 NOISE & VIBRATION MONITORING WITH EQUIPMENT TBD HR

0030 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0031 SENIOR FIELD SOILS TECHNICIAN 10 HR

0032 SOILS SPECIAL INSPECTOR 10 HR

0033 ASTM D 1140 AMOUNT OF MATL FINER THAN #200 SIEVE 10 EA

0034 ASTM D 1557 LAB COMPACTION SOIL MODIFIED EFFORT 10 EA

0035 ASTM D 2216 MOISTURE CONTENT BY OVEN 10 EA

0036 ASTM D 2487 SOILS CLASSIFICATION 10 EA

0037 ASTM D 2974 ORGANIC SOILS TEST 10 EA

0038 ASTM D 422 GRAIN SIZE ANALYSIS SIEVE w/HYDROMETER 10 EA

0039 ASTM D 4253 & ASTM D 4254 MAX & MIN INDEX DENSITY 10 EA

0040 ASTM D 4318 LIQUID, PLASTIC LIMIT AND PLASTICITY INDEX 10 EA

0041 ASTM D 4643 MOISTURE CONTENT MICROWAVE OVEN 10 EA

0042 ASTM D 698 LABORATORY COMPACTION STD EFFORT 10 EA

0043 ASTM D 698 LABORATORY COMPACTION 1 POINT 10 EA

0044 ASTM D 854 SPECIFIC GRAVITY 10 EA

STEEL INSPECTION & TESTING

0045 CERTIFIED WELDING INSPECTOR LEVEL II (CWI) 100 HR

0046 STRUCTURAL STEEL AND BOLTING SPECIAL INSPECTOR 10 HR

0047 ASTM E 709 MAGNETIC TEST 10 EA

0048 ASTM E 164 ULTRASONIC TEST 10 EA

0049 ASTM E 165 LIQUID PENETRANT TEST 10 EA

0050 ASTM E 94 RADIOGRAPHIC TEST 10 EA

NONDESTRUCTIVE TESTING

0051 ASNT NOT TECHNICIAN LEVELL III 10 HR

0052 ASNT NOT TECHNICIAN LEVEL II (NON CWI) 10 HR

0053 DISCONTINUITY (HOLIDAY) COATING TEST 55 EA

0054 COATING THICKNESS TEST 5 EA

0055 HARDNESS TEST 5 EA

0056 ASTM E 488 HYDRAULIC RAM & JACK FOR ANCHOR PULL 5 EA

SUBTOTAL YEAR 1

YEAR 2

ITEM PAY ITEM EST UNIT UNIT EST AMT

NO. QTY PRICE

0057AA

QAR II (S.T.)

HR

0057AB QAR II (O.T.) 20 HR

0057AC QAR II (S.D.) 2 HR

0058AA QAR III (S.T.) 20,000 HR

0058AB QAR III (O.T.) 2,000 HR

0058AC QAR III (S.D.) 200 HR

0059AA QAR V (S.T.) 1,000 HR

0059AB QAR V (O.T.) 100 HR

0059AC QAR V (S.D.) 10 HR

0060AA SUPV CONST REP (S.T.) 1,000 HR

0060AB SUPV CONST REP (O.T.) 100 HR

0060AC SUPV CONST REP (S.D.) 10 HR

0061AA QUALITY ASSURANCE MANAGER (S.T.) 200 HR

0061AB QUALITY ASSURANCE MANAGER (O.T.) 20 HR

0061AC QUALITY ASSURANCE MANAGER (S.D.) 2 HR

0062AA SECRETARY (S.T.) 1,000 HR

0062AB SECRETARY (O.T.) 100 HR

0062AC SECRETARY (S.D.) 10 HR

0063AA SCHEDULER (S.T.) 1,000 HR

0063AB SCHEDULER (O.T.) 100 HR

0063AC SCHEDULER (S.D.) 10 HR

0064AA EXPERT SCHEDULER (S.T.) 200 HR

0064AB EXPERT SCHEDULER (O.T.) 20 HR

0064AC EXPERT SCHEDULER (S.D.) 2 HR

0065AA COST ESTIMATOR (S.T.) 4,000 HR

0065AB COST ESTIMATOR (O.T.) 400 HR

0065AC COST ESTIMATOR (S.D.) 40 HR

0066AA PROGRAM ANALYST (S.T.) 200 HR

0066AB PROGRAM ANALYST (O.T.) 20 HR

0066AC PROGRAM ANALYST (S.D.) 2 HR

0067AA CONST MANAGER (S.T.) 1,000 HR

0067AB CONST MANAGER (O.T.) 100 HR

0067AC CONST MANAGER (S.D.) 10 HR

0068AA PROJECT ENGINEER (S.T.) 4,000 HR

0068AB PROJECT ENGINEER (O.T.) 400 HR

0068AC PROJECT ENGINEER (S.D.) 40 HR

0069AA SENIOR ENGINEER (S.T.) 1,000 HR

0069AB SENIOR ENGINEER (O.T.) 100 HR

0069AC SENIOR ENGINEER (S.D.) 10 HR

0070AA CIVIL ENGR TECH I (S.T.) 400 HR

0070AB CIVIL ENGR TECH I (O.T.) 40 HR

0070AC CIVIL ENGR TECH I (S.D.) 4 HR

0071AA CIVIL ENGR TECH II (S.T.) 400 HR

0072AB CIVIL ENGR TECH II (O.T.) 40 HR

0072AC CIVIL ENGR TECH II (S.D.) 4 HR

0073 4X2 PICKUP TRUCK 6,000 DA

0074 4X4 PICKUP TRUCK 100 DA

0075 ADDITIONAL MILEAGE TBD FTR

0076AA PER DIEM LODGING TBD FTR

0076AB PER DIEM MEALS 500 DA

0077 SPECIAL EQUIPMENT TBD DA

0078 SPECIAL TESTING TBD TBN

0079 ACI LEVEL 1 FIELD CONCRETE TECH 100 HR

0080 REINFORCED CONCRETE SPECIAL INSP 50 HR

0081 PRESTRESSED CONCRETE SPECIAL INSP 50 HR

0082 ASTM C 117 MATLS FINER #200 SIEVE WASH 10 EA

0083 ASTM C 136 SIEVE ANALYS FINE & COARSE AGGREGATES 10 EA

0084 ASTM C 190 COMPRESSIVE STRENGTH MORTARS CUBE 10 EA

0085 ASTM C 39 COMPRESSIVE STRENGTH CONCRETE SPEC 10 EA

SOILS INSPECTION & TESTING

0086 NOISE 7 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0087 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0088 SENIOR FIELD SOILS TECHNICIAN 10 HR

0089 SOILS SPECIAL INSPECTOR 10 HR

0090 ASTM D 1140 AMOUNT OF MATL FINER THAN #200 SIEVE 10 EA

0091 ASTM D 1557 LAB COMPACTION SOIL MODIFIED EFFORT 10 EA

0092 ASTM D 2216 MOISTURE CONTENT BY OVEN 10 EA

0093 ASTM D 2487 SOILS CLASSIFICATION 10 EA

0094 ASTM D 2974 ORGANIC SOILS TEST 10 EA

0095 ASTM D 422 GRAIN SIZE ANALYSIS SIEVE w/HYDROMETER 10 EA

0096 ASTM D 4253 & ASTM D 4254 MAX & MIN INDEX DENSITY 10 EA

0097 ASTM D 4318 LIQUID, PLASTIC LIMIT AND PLASTICITY INDEX 10 EA

0098 ASTM D 4643 MOISTURE CONTENT MICROWAVE OVEN 10 EA

0099 ASTM D 698 LABORATORY COMPACTION STD EFFORT 10 EA

0100 ASTM D 698 LABORATORY COMPACTION 1 POINT 10 EA

0101 ASTM D 854 SPECIFIC GRAVITY 10 EA

STEEL INSPECTION & TESTING

0102 CERTIFIED WELDING INSPECTOR LEVEL II (CWI) 100 HR

0103 STRUCTURAL STEEL AND BOLTING SPECIAL INSPECTOR 10 HR

0104 ASTM E 709 MAGNETIC TEST 10 EA

0105 ASTM E 164 ULTRASONIC TEST 10 EA

0106 ASTM E 165 LIQUID PENETRANT TEST 10 EA

0107 ASTM E 94 RADIOGRAPHIC TEST 10 EA

NONDESTRUCTIVE TESTING

0108 ASNT NOT TECHNICIAL LEVELL III 10 HR

0109 ASNT NOT TECHNICIAN LEVEL II (NON CWI) 10 HR

0110 DISCONTINUITY (HOLIDAY) COATING TEST 55 EA

0111 COATING THICKNESS TEST 5 EA

0112 HARDNESS TEST 5 EA

0113 ASTM E 488 HYDRAULIC RAM & JACK FOR ANCHOR PULL 5 EA

SUBTOTAL YEAR 2

YEAR 3

0114AA

0114AB QAR II (O.T.) 20 HR

0114AC QAR II (S.D.) 2 HR

0115AA QAR III (S.T.) 20,000 HR

0115AB QAR III (O.T.) 2,000 HR

0115AC QAR III (S.D.) 200 HR

0116AA QAR V (S.T.) 1,000 HR

0116AB QAR V (O.T.) 100 HR

0116AC QAR V (S.D.) 10 HR

0117AA SUPV CONST REP (S.T.) 1,000 HR

0117AB SUPV CONST REP (O.T.) 100 HR

0117AC SUPV CONST REP (S.D.) 10 HR

0118AA QUALITY ASSURANCE MANAGER (S.T.) 200 HR

0118AB QUALITY ASSURANCE MANAGER (O.T.) 20 HR

0118AC QUALITY ASSURANCE MANAGER (S.D.) 2 HR

0119AA SECRETARY (S.T.) 1,000 HR

0119AB SECRETARY (O.T.) 100 HR

0119AC SECRETARY (S.D.) 10 HR

0120AA SCHEDULER (S.T.) 1,000 HR

0120AB SCHEDULER (O.T.) 100 HR

0120AC SCHEDULER (S.D.) 10 HR

0121AA EXPERT SCHEDULER (S.T.) 200 HR

0121AB EXPERT SCHEDULER (O.T.) 20 HR

0121AC EXPERT SCHEDULER (S.D.) 2 HR

0122AA COST ESTIMATOR (S.T.) 4,000 HR

0122AB COST ESTIMATOR (O.T.) 400 HR

0122AC COST ESTIMATOR (S.D.) 40 HR

0123AA PROGRAM ANALYST (S.T.) 200 HR

0123AB PROGRAM ANALYST (O.T.) 20 HR

0123AC PROGRAM ANALYST (S.D.) 2 HR

0124AA CONST MANAGER (S.T.) 1,000 HR

0124AB CONST MANAGER (O.T.) 100 HR

0124AC CONST MANAGER (S.D.) 10 HR

0125AA PROJECT ENGINEER (S.T.) 4,000 HR

0125AB PROJECT ENGINEER (O.T.) 400 HR

0125AC PROJECT ENGINEER (S.D.) 40 HR

0126AA SENIOR ENGINEER (S.T.) 1,000 HR

0126AB SENIOR ENGINEER (O.T.) 100 HR

0126AC SENIOR ENGINEER (S.D.) 10 HR

0127AA CIVIL ENGR TECH I (S.T.) 400 HR

0127AB CIVIL ENGR TECH I (O.T.) 40 HR

0127AC CIVIL ENGR TECH I (S.D.) 4 HR

0128AA CIVIL ENGR TECH II (S.T.) 400 HR

0128AB CIVIL ENGR TECH II (O.T.) 40 HR

0128AC CIVIL ENGR TECH II (S.D.) 4 HR

0129 4X2 PICKUP TRUCK 6,000 DA

0130 4X4 PICKUP TRUCK 100 DA

0131 ADDITIONAL MILEAGE TBD FTR

0132AA PER DIEM LODGING TBD FTR

0132AB PER DIEM MEALS 500 DA

0133 SPECIAL EQUIPMENT TBD DA

0134 SPECIAL TESTING TBD TBN

0135 ACI LEVEL 1 FIELD CONCRETE TECH 100 HR

0136 REINFORCED CONCRETE SPECIAL INSP 50 HR

0137 PRESTRESSED CONCRETE SPECIAL INSP 50 HR

0138 ASTM C 117 MATLS FINER #200 SIEVE WASH 10 EA

0139 ASTM C 136 SIEVE ANALYS FINE & COARSE AGGREGATES 10 EA

0140 ASTM C 190 COMPRESSIVE STRENGTH MORTARS CUBE 10 EA

0141 ASTM C 39 COMPRESSIVE STRENGTH CONCRETE SPEC 10 EA

0142 NOISE 7 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0143 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0144 SENIOR FIELD SOILS TECHNICIAN 10 HR

0145 SOILS SPECIAL INSPECTOR 10 HR

0146 ASTM D 1140 AMOUNT OF MATL FINER THAN #200 SIEVE 10 EA

0147 ASTM D 1557 LAB COMPACTION SOIL MODIFIED EFFORT 10 EA

0148 ASTM D 2216 MOISTURE CONTENT BY OVEN 10 EA

0149 ASTM D 2487 SOILS CLASSIFICATION 10 EA

0150 ASTM D 2974 ORGANIC SOILS TEST 10 EA

0151 ASTM D 422 GRAIN SIZE ANALYSIS SIEVE w/HYDROMETER 10 EA

0152 ASTM D 4253 & ASTM D 4254 MAX & MIN INDEX DENSITY 10 EA

0153 ASTM D 4318 LIQUID, PLASTIC LIMIT AND PLASTICITY INDEX 10 EA

0154 ASTM D 4643 MOISTURE CONTENT MICROWAVE OVEN 10 EA

0155 ASTM D 698 LABORATORY COMPACTION STD EFFORT 10 EA

0156 ASTM D 698 LABORATORY COMPACTION 1 POINT 10 EA

0157 ASTM D 854 SPECIFIC GRAVITY 10 EA

0158 CERTIFIED WELDING INSPECTOR LEVEL II (CWI) 100 HR

0159 STRUCTURAL STEEL AND BOLTING SPECIAL INSPECTOR 10 HR

0160 ASTM E 709 MAGNETIC TEST 10 EA

0161 ASTM E 164 ULTRASONIC TEST 10 EA

0162 ASTM E 165 LIQUID PENETRANT TEST 10 EA

0163 ASTM E 94 RADIOGRAPHIC TEST 10 EA

0164 ASNT NOT TECHNICIAL LEVELL III 10 HR

0165 ASNT NOT TECHNICIAN LEVEL II (NON CWI) 10 HR

0166 DISCONTINUITY (HOLIDAY) COATING TEST 55 EA

0167 COATING THICKNESS TEST 5 EA

0168 HARDNESS TEST 5 EA

0169 ASTM E 488 HYDRAULIC RAM & JACK FOR ANCHOR PULL 5 EA

SUBTOTAL YEAR 3

YEAR 4

0170AA

0170AB QAR II (O.T.) 20 HR

0170AC QAR II (S.D.) 2 HR

0171AA QAR III (S.T.) 20,000 HR

0171AB QAR III (O.T.) 2,000 HR

0171AC QAR III (S.D.) 200 HR

0172AA QAR V (S.T.) 1,000 HR

0172AB QAR V (O.T.) 100 HR

0172AC QAR V (S.D.) 10 HR

0173AA SUPV CONST REP (S.T.) 1,000 HR

0173AB SUPV CONST REP (O.T.) 100 HR

0173AC SUPV CONST REP (S.D.) 10 HR

0174AA QUALITY ASSURANCE MANAGER (S.T.) 200 HR

0174AB QUALITY ASSURANCE MANAGER (O.T.) 20 HR

0174AC QUALITY ASSURANCE MANAGER (S.D.) 2 HR

0175AA SECRETARY (S.T.) 1,000 HR

0175AB SECRETARY (O.T.) 100 HR

0175AC SECRETARY (S.D.) 10 HR

0176AA SCHEDULER (S.T.) 1,000 HR

0176AB SCHEDULER (O.T.) 100 HR

0176AC SCHEDULER (S.D.) 10 HR

0177AA EXPERT SCHEDULER (S.T.) 200 HR

0177AB EXPERT SCHEDULER (O.T.) 20 HR

0177AC EXPERT SCHEDULER (S.D.) 2 HR

0178AA COST ESTIMATOR (S.T.) 4,000 HR

0178AB COST ESTIMATOR (O.T.) 400 HR

0178AC COST ESTIMATOR (S.D.) 40 HR

0179AA PROGRAM ANALYST (S.T.) 200 HR

0179AB PROGRAM ANALYST (O.T.) 20 HR

0179AC PROGRAM ANALYST (S.D.) 2 HR

0180AA CONST MANAGER (S.T.) 1,000 HR

0180AB CONST MANAGER (O.T.) 100 HR

0180AC CONST MANAGER (S.D.) 10 HR

0181AA PROJECT ENGINEER (S.T.) 4,000 HR

0181AB PROJECT ENGINEER (O.T.) 400 HR

0181AC PROJECT ENGINEER (S.D.) 40 HR

0182AA SENIOR ENGINEER (S.T.) 1,000 HR

0182AB SENIOR ENGINEER (O.T.) 100 HR

0182AC SENIOR ENGINEER (S.D.) 10 HR

0183AA CIVIL ENGR TECH I (S.T.) 400 HR

0183AB CIVIL ENGR TECH I (O.T.) 40 HR

0183AC CIVIL ENGR TECH I (S.D.) 4 HR

0184AA CIVIL ENGR TECH II (S.T.) 400 HR

0184AB CIVIL ENGR TECH II (O.T.) 40 HR

0184AC CIVIL ENGR TECH II (S.D.) 4 HR

0185 4X2 PICKUP TRUCK 6,000 DA

0186 4X4 PICKUP TRUCK 100 DA

0187 ADDITIONAL MILEAGE TBD FTR

0188AA PER DIEM LODGING TBD FTR

0188AB PER DIEM MEALS 500 DA

0189 SPECIAL EQUIPMENT TBD DA

0190 SPECIAL TESTING TBD TBN

0191 ACI LEVEL 1 FIELD CONCRETE TECH 100 HR

0192 REINFORCED CONCRETE SPECIAL INSP 50 HR

0193 PRESTRESSED CONCRETE SPECIAL INSP 50 HR

0194 ASTM C 117 MATLS FINER #200 SIEVE WASH 10 EA

0195 ASTM C 136 SIEVE ANALYS FINE & COARSE AGGREGATES 10 EA

0196 ASTM C 190 COMPRESSIVE STRENGTH MORTARS CUBE 10 EA

0197 ASTM C 39 COMPRESSIVE STRENGTH CONCRETE SPEC 10 EA

0198 NOISE 7 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0199 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0200 SENIOR FIELD SOILS TECHNICIAN 10 HR

0201 SOILS SPECIAL INSPECTOR 10 HR

0202 ASTM D 1140 AMOUNT OF MATL FINER THAN #200 SIEVE 10 EA

0203 ASTM D 1557 LAB COMPACTION SOIL MODIFIED EFFORT 10 EA

0204 ASTM D 2216 MOISTURE CONTENT BY OVEN 10 EA

0205 ASTM D 2487 SOILS CLASSIFICATION 10 EA

0206 ASTM D 2974 ORGANIC SOILS TEST 10 EA

0207 ASTM D 422 GRAIN SIZE ANALYSIS SIEVE w/HYDROMETER 10 EA

0208 ASTM D 4253 & ASTM D 4254 MAX & MIN INDEX DENSITY 10 EA

0209 ASTM D 4318 LIQUID, PLASTIC LIMIT AND PLASTICITY INDEX 10 EA

0210 ASTM D 4643 MOISTURE CONTENT MICROWAVE OVEN 10 EA

0211 ASTM D 698 LABORATORY COMPACTION STD EFFORT 10 EA

0212 ASTM D 698 LABORATORY COMPACTION 1 POINT 10 EA

0213 ASTM D 854 SPECIFIC GRAVITY 10 EA

0214 CERTIFIED WELDING INSPECTOR LEVEL II (CWI) 100 HR

0215 STRUCTURAL STEEL AND BOLTING SPECIAL INSPECTOR 10 HR

0216 ASTM E 709 MAGNETIC TEST 10 EA

0217 ASTM E 164 ULTRASONIC TEST 10 EA

0218 ASTM E 165 LIQUID PENETRANT TEST 10 EA

0219 ASTM E 94 RADIOGRAPHIC TEST 10 EA

0220 ASNT NOT TECHNICIAL LEVELL III 10 HR

0221 ASNT NOT TECHNICIAN LEVEL II (NON CWI) 10 HR

0222 DISCONTINUITY (HOLIDAY) COATING TEST 55 EA

0223 COATING THICKNESS TEST 5 EA

0224 HARDNESS TEST 5 EA

0225 ASTM E 488 HYDRAULIC RAM & JACK FOR ANCHOR PULL 5 EA

SUBTOTAL YEAR 4

YEAR 5

0226AA

0226AB QAR II (O.T.) 20 HR

0226AC QAR II (S.D.) 2 HR

0227AA QAR III (S.T.) 20,000 HR

0227AB QAR III (O.T.) 2,000 HR

0227AC QAR III (S.D.) 200 HR

0228AA QAR V (S.T.) 1,000 HR

0228AB QAR V (O.T.) 100 HR

0228AC QAR V (S.D.) 10 HR

0229AA SUPV CONST REP (S.T.) 1,000 HR

0229AB SUPV CONST REP (O.T.) 100 HR

0229AC SUPV CONST REP (S.D.) 10 HR

0230AA QUALITY ASSURANCE MANAGER (S.T.) 200 HR

0230AB QUALITY ASSURANCE MANAGER (O.T.) 20 HR

0230AC QUALITY ASSURANCE MANAGER (S.D.) 2 HR

0231AA SECRETARY (S.T.) 1,000 HR

0231AB SECRETARY (O.T.) 100 HR

0231AC SECRETARY (S.D.) 10 HR

0232AA SCHEDULER (S.T.) 1,000 HR

0232AB SCHEDULER (O.T.) 100 HR

0232AC SCHEDULER (S.D.) 10 HR

0233AA EXPERT SCHEDULER (S.T.) 200 HR

0233AB EXPERT SCHEDULER (O.T.) 20 HR

0233AC EXPERT SCHEDULER (S.D.) 2 HR

0234AA COST ESTIMATOR (S.T.) 4,000 HR

0234AB COST ESTIMATOR (O.T.) 400 HR

0234AC COST ESTIMATOR (S.D.) 40 HR

0235AA PROGRAM ANALYST (S.T.) 200 HR

0235AB PROGRAM ANALYST (O.T.) 20 HR

0235AC PROGRAM ANALYST (S.D.) 2 HR

0236AA CONST MANAGER (S.T.) 1,000 HR

0236AB CONST MANAGER (O.T.) 100 HR

0236AC CONST MANAGER (S.D.) 10 HR

0237AA PROJECT ENGINEER (S.T.) 4,000 HR

0237AB PROJECT ENGINEER (O.T.) 400 HR

0237AC PROJECT ENGINEER (S.D.) 40 HR

0238AA SENIOR ENGINEER (S.T.) 1,000 HR

0238AB SENIOR ENGINEER (O.T.) 100 HR

0238AC SENIOR ENGINEER (S.D.) 10 HR

0239AA CIVIL ENGR TECH I (S.T.) 400 HR

0239AB CIVIL ENGR TECH I (O.T.) 40 HR

0239AC CIVIL ENGR TECH I (S.D.) 4 HR

0240AA CIVIL ENGR TECH II (S.T.) 400 HR

0240AB CIVIL ENGR TECH II (O.T.) 40 HR

0240AC CIVIL ENGR TECH II (S.D.) 4 HR

0241 4X2 PICKUP TRUCK 6,000 DA

0242 4X4 PICKUP TRUCK 100 DA

0243 ADDITIONAL MILEAGE TBD FTR

0244AA PER DIEM LODGING TBD FTR

0244AB PER DIEM MEALS 500 DA

0245 SPECIAL EQUIPMENT TBD DA

0246 SPECIAL TESTING TBD TBN

0247 ACI LEVEL 1 FIELD CONCRETE TECH 100 HR

0248 REINFORCED CONCRETE SPECIAL INSP 50 HR

0249 PRESTRESSED CONCRETE SPECIAL INSP 50 HR

0250 ASTM C 117 MATLS FINER #200 SIEVE WASH 10 EA

0251 ASTM C 136 SIEVE ANALYS FINE & COARSE AGGREGATES 10 EA

0252 ASTM C 190 COMPRESSIVE STRENGTH MORTARS CUBE 10 EA

0253 ASTM C 39 COMPRESSIVE STRENGTH CONCRETE SPEC 10 EA

0254 NOISE 7 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0255 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0256 SENIOR FIELD SOILS TECHNICIAN 10 HR

0257 SOILS SPECIAL INSPECTOR 10 HR

0258 ASTM D 1140 AMOUNT OF MATL FINER THAN #200 SIEVE 10 EA

0259 ASTM D 1557 LAB COMPACTION SOIL MODIFIED EFFORT 10 EA

0260 ASTM D 2216 MOISTURE CONTENT BY OVEN 10 EA

0261 ASTM D 2487 SOILS CLASSIFICATION 10 EA

0262 ASTM D 2974 ORGANIC SOILS TEST 10 EA

0263 ASTM D 422 GRAIN SIZE ANALYSIS SIEVE w/HYDROMETER 10 EA

0264 ASTM D 4253 & ASTM D 4254 MAX & MIN INDEX DENSITY 10 EA

0265 ASTM D 4318 LIQUID, PLASTIC LIMIT AND PLASTICITY INDEX 10 EA

0266 ASTM D 4643 MOISTURE CONTENT MICROWAVE OVEN 10 EA

0267 ASTM D 698 LABORATORY COMPACTION STD EFFORT 10 EA

0268 ASTM D 698 LABORATORY COMPACTION 1 POINT 10 EA

0269 ASTM D 854 SPECIFIC GRAVITY 10 EA

0270 CERTIFIED WELDING INSPECTOR LEVEL II (CWI) 100 HR

0271 STRUCTURAL STEEL AND BOLTING SPECIAL INSPECTOR 10 HR

0272 ASTM E 709 MAGNETIC TEST 10 EA

0273 ASTM E 164 ULTRASONIC TEST 10 EA

0274 ASTM E 165 LIQUID PENETRANT TEST 10 EA

0275 ASTM E 94 RADIOGRAPHIC TEST 10 EA

0276 ASNT NOT TECHNICIAL LEVELL III 10 HR

0277 ASNT NOT TECHNICIAN LEVEL II (NON CWI) 10 HR

0278 DISCONTINUITY (HOLIDAY) COATING TEST 55 EA

0279 COATING THICKNESS TEST 5 EA

0280 HARDNESS TEST 5 EA

0281 ASTM E 488 HYDRAULIC RAM & JACK FOR ANCHOR PULL 5 EA

SUBTOTAL YEAR 5

YEAR 5.5

0282AA

0282AB QAR II (O.T.) 10 HR

0282AC QAR II (S.D.) 1 HR

0283AA QAR III (S.T.) 10,000 HR

0283AB QAR III (O.T.) 1,000 HR

0283AC QAR III (S.D.) 100 HR

0284AA QAR V (S.T.) 500 HR

0284AB QAR V (O.T.) 50 HR

0284AC QAR V (S.D.) 5 HR

0285AA SUPV CONST REP (S.T.) 500 HR

0285AB SUPV CONST REP (O.T.) 50 HR

0285AC SUPV CONST REP (S.D.) 5 HR

0286AA QUALITY ASSURANCE MANAGER (S.T.) 100 HR

0286AB QUALITY ASSURANCE MANAGER (O.T.) 10 HR

0286AC QUALITY ASSURANCE MANAGER (S.D.) 1 HR

0287AA SECRETARY (S.T.) 500 HR

0287AB SECRETARY (O.T.) 50 HR

0287AC SECRETARY (S.D.) 5 HR

0288AA SCHEDULER (S.T.) 500 HR

0288AB SCHEDULER (O.T.) 50 HR

0288AC SCHEDULER (S.D.) 5 HR

0289AA EXPERT SCHEDULER (S.T.) 100 HR

0289AB EXPERT SCHEDULER (O.T.) 10 HR

0289AC EXPERT SCHEDULER (S.D.) 1 HR

0290AA COST ESTIMATOR (S.T.) 2,000 HR

0290AB COST ESTIMATOR (O.T.) 200 HR

0290AC COST ESTIMATOR (S.D.) 20 HR

0291AA PROGRAM ANALYST (S.T.) 100 HR

0291AB PROGRAM ANALYST (O.T.) 10 HR

0291AC PROGRAM ANALYST (S.D.) 1 HR

0292AA CONST MANAGER (S.T.) 500 HR

0292AB CONST MANAGER (O.T.) 50 HR

0292AC CONST MANAGER (S.D.) 5 HR

0293AA PROJECT ENGINEER (S.T.) 2,000 HR

0293AB PROJECT ENGINEER (O.T.) 200 HR

0293AC PROJECT ENGINEER (S.D.) 20 HR

0294AA SENIOR ENGINEER (S.T.) 500 HR

0294AB SENIOR ENGINEER (O.T.) 50 HR

0294AC SENIOR ENGINEER (S.D.) 5 HR

0295AA CIVIL ENGR TECH I (S.T.) 200 HR

0295AB CIVIL ENGR TECH I (O.T.) 20 HR

0295AC CIVIL ENGR TECH I (S.D.) 2 HR

0296AA CIVIL ENGR TECH II (S.T.) 200 HR

0296AB CIVIL ENGR TECH II (O.T.) 20 HR

0296AC CIVIL ENGR TECH II (S.D.) 2 HR

0297 4X2 PICKUP TRUCK 3,000 DA

0298 4X4 PICKUP TRUCK 50 DA

0299 ADDITIONAL MILEAGE TBD FTR

0300AA PER DIEM LODGING TBD FTR

0300AB PER DIEM MEALS 250 DA

0301 SPECIAL EQUIPMENT TBD DA

0302 SPECIAL TESTING TBD TBN

0303 ACI LEVEL 1 FIELD CONCRETE TECH 50 HR

0304 REINFORCED CONCRETE SPECIAL INSP 25 HR

0305 PRESTRESSED CONCRETE SPECIAL INSP 25 HR

0306 ASTM C 117 MATLS FINER #200 SIEVE WASH 5 EA

0307 ASTM C 136 SIEVE ANALYS FINE & COARSE AGGREGATES 5 EA

0308 ASTM C 190 COMPRESSIVE STRENGTH MORTARS CUBE 5 EA

0309 ASTM C 39 COMPRESSIVE STRENGTH CONCRETE SPEC 5 EA

0310 NOISE 7 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0311 VIBRATION MONITORING WITH EQUIPMENT TBD HR

0312 SENIOR FIELD SOILS TECHNICIAN 5 HR

0313 SOILS SPECIAL INSPECTOR 5 HR

0314 ASTM D 1140 AMOUNT OF MATL FINER THAN #200 SIEVE 5 EA

0315 ASTM D 1557 LAB COMPACTION SOIL MODIFIED EFFORT 5 EA

0316 ASTM D 2216 MOISTURE CONTENT BY OVEN 5 EA

0317 ASTM D 2487 SOILS CLASSIFICATION 5 EA

0318 ASTM D 2974 ORGANIC SOILS TEST 5 EA

0319 ASTM D 422 GRAIN SIZE ANALYSIS SIEVE w/HYDROMETER 5 EA

0320 ASTM D 4253 & ASTM D 4254 MAX & MIN INDEX DENSITY 5 EA

0321 ASTM D 4318 LIQUID, PLASTIC LIMIT AND PLASTICITY INDEX 5 EA

0322 ASTM D 4643 MOISTURE CONTENT MICROWAVE OVEN 5 EA

0323 ASTM D 698 LABORATORY COMPACTION STD EFFORT 5 EA

0324 ASTM D 698 LABORATORY COMPACTION 1 POINT 5 EA

0325 ASTM D 854 SPECIFIC GRAVITY 5 EA

0326 CERTIFIED WELDING INSPECTOR LEVEL II (CWI) 50 HR

0327 STRUCTURAL STEEL AND BOLTING SPECIAL INSPECTOR 5 HR

0328 ASTM E 709 MAGNETIC TEST 5 EA

0329 ASTM E 164 ULTRASONIC TEST 5 EA

0330 ASTM E 165 LIQUID PENETRANT TEST 5 EA

0331 ASTM E 94 RADIOGRAPHIC TEST 5 EA

0332 ASNT NOT TECHNICIAL LEVELL III 5 HR

0333 ASNT NOT TECHNICIAN LEVEL II (NON CWI) 5 HR

0334 DISCONTINUITY (HOLIDAY) COATING TEST 27 EA

0335 COATING THICKNESS TEST 2 EA

0336 HARDNESS TEST 2 EA

0337 ASTM E 488 HYDRAULIC RAM & JACK FOR ANCHOR PULL 2 EA

SUBTOTAL YEAR 5.5

GRAND TOTAL

CONSTRUCTION SERVICES

SECTION C DESCRIPTION/

SPECIFICATIONS

C.1 DESCRIPTION

C.1.1 Location of Work - Construction management services for this contract will be performed primarily within the limits of the U.S. Army Engineer District, New Orleans and as directed by the Contracting Officer (KO) and in coordination with the Contracting Officer’s Representative (COR). As a regional contract, work may be located in areas assigned to other USACE Districts however, work will be primarily located within the boundaries of the New Orleans District.

C.1.2 Description of Work - The Contractor shall perform a broad range of construction management, quality assurance activities, flood fight inspection capabilities, and related services to satisfy fluctuating needs and conditions in accordance with plans developed by the Government, and other Government policy and regulations. The purpose of these activities is to manage the construction contracts and assure that construction of projects is in accordance with construction contract plans and specifications. Quality assurance activities to be performed shall include, but not be limited to:

coordinating, reading plans and specifications, monitoring, documenting, and reporting on construction contractor quality control activities and construction safety, progress, and testing. Section C.2 contains applicable technical references. Construction management services including tracking and management of project funds, submittal tracking and coordination, coordination with field personnel and other district elements concerning construction activities, modification and claim activities, and plan and specification review shall be required for the construction of levees, revetments and various structures, hydraulic and bucket dredging, the repair and/or maintenance of various structures, drainage structures and channels, debris removal, and other emergency services, but shall not be limited to the above.

C.1.2.1 As used within this description of work, the terms “assign” or “assignment” shall refer to defined work that the contractor is required to perform pursuant to issued task orders. In no event shall the terms “assign” or “assignment” be construed to mean that the Government has the right, or is intending to exercise the right, of continuous control over contractor personnel who are performing under the contract.

C.1.3 Authorization and Performance of Work - The general procedural guide for the authorization and subsequent performance of work under this contract is as follows:

a. Task Orders shall be either negotiated for the overall management of a particular project or work assignment or issued by the level of effort required for a stated duration. Written task orders (SF Form 1449) for a designated period will be issued by the Contracting Officer. These task orders will in general define the work and will state the end product required, or the level of effort required for a stated duration. Task Orders will identify projects and the funds obligated against those projects.

b. The task orders issued by the Contracting Officer will be clarified as necessary, either verbally or in writing by the Contracting

Officer's Representative, to furnish details governing each work assignment under the task order, including the date for commencement of work on each respective task order and the work items that shall be performed.

C.1.4 Contractor Responsibilities - The Contractor shall be held responsible for the accuracy, quality and completeness of the services to be provided. In case of unsatisfactory work, the Contractor will be held responsible as stated in C.3.4 and reviewed in accordance with the Quality Assurance Surveillance Plan (QASP) referenced in C.1.13. In performing required services, the contractor shall provide all management necessary in receiving assignments, planning, training personnel, checking completed work, and reporting results. Full time Quality Assurance is required during construction activities. Additional services that may be required include preparation of cost estimates for changes, scheduling, review and verification of progress pay estimates, quality assurance activities, performing QA Testing, funds management, preparation of scope changes, and submittal management. Except as otherwise provided in the specifications, the Contractor shall furnish all plant, personnel, transportation, fuel and supply materials as necessary to perform the services required in each task order. All of the above shall be done in accordance with the specifications of this contract.

C.1.5 Contractor Performance - The Contractor shall be prepared to commence work on each task order within 3 calendar days after date of issuance of the task order by the Contracting Officer. The Contractor will be required to commence work on each task order at the designated locations at the time specified by the Contracting Officer or his Authorized Representative. The Contractor will be notified by the Contracting Officer after issuance of the task order of the date and time to commence work on each assignment. The Contractor will perform each assignment continuously as working conditions permit or as deemed necessary by the Contracting Officer or his Authorized Representative as it relates to the construction progress and requirements, except that the Government retains the right to adjust, suspend or terminate assignments as per paragraph C.1.5.2 of this contract. The Contractor is expected to review work in progress to monitor personnel performance in accordance with the contract specifications, Government policy and regulations. The Contractor shall furnish to the Government timely notification when problems arise.

C.1.5.1 Commencement of Work on a task order - Prior to beginning work assignments, each contract employee is to meet with the COR’s designated Government Official indicated as the point of contact, to discuss specifics of the work assignment. Each proposed assignment will be discussed by the Contractor's personnel and the COR’s designated Contract Coordinator as necessary to develop a mutual understanding of:

a. Type of work to be done.

b. End result expected by the Contracting Officer.

c. Methods to be used by the Contractor.

d. Reports to be submitted.

The foregoing discussions shall be only for the purpose of developing a mutual understanding of the items described; in no event will the COR or designated Government official exercise, or have the right to exercise, continuous control over contractor personnel who are performing under the contract.

Payment shall be made to the contractor for applicable personnel attending prework meetings and shall be in accordance with the provisions of Paragraph C.1.3, Authorization and Performance of Work. The contractor shall ensure that all contractor personnel will be properly oriented relative to the responsibilities and publications listed in C.2.1 prior to beginning a work assignment.

The Contractor shall bear any costs to accomplish the above orientation for initial assignments, for substitutions, or replacements of personnel once work has begun, whether dictated by contractor or Government.

C.1.5.2 Modifications to task orders - The Government reserves the right to increase or decrease the amount of services being furnished under each task order, or to discontinue completely or in part the services being furnished as may be deemed necessary by the Contracting Officer or the Authorized Representative. The Contractor agrees that no claim will be made for additional adjustments based upon increase, decrease, or discontinuance of services.

C.1.6 Verifications - For task orders utilizing level of effort, no payment will be made for services in excess of 8 hours in any one calendar day unless work is actually performed. The Contractor will obtain documented authorization prior to working more than 8 hours in any one calendar day, on a weekend, or on a holiday. Should the contractor perform services in an overtime status, or on holidays due to emergencies, or in the event of other unforeseen circumstances without having obtained prior acceptance, he (contractor) must provide written justification to the Contracting Officer or the Authorized Representative on the first workday after performing the overtime or holiday work. The Contracting Officer or the Authorized Representative will review and verify the contractor's justification to determine if post-authorization is warranted. No payment for overtime or holiday work will be made where prior written authorization or post-authorization is not granted.

C.1.7 Distribution of Work - The Government will determine which projects are to be furnished construction services by the Contractor and reserves the right to discontinue at any time the services provided herein subject to the guaranteed minimum. Insofar as distribution of work assignments is concerned, the Contractor agrees that additional adjustments based upon alleged diversion of orders to Government or other forces shall not be a basis for a claim.

C.1.8 Contractor Mobilization - When so ordered by the Contracting Officer, the Contractor must furnish the required contract employees in compliance with paragraph C.1.5.

C.1.9 Completed Work - All completed work, including survey field notes, hydrographic survey recordings, computations and adjustments, lab test results, and other applicable reports shall be delivered to the appropriate Contracting Officer's Representative as needed in a timely manner.

C.1.10 Remote Areas - Services may be required to be performed in remote areas.

C.1.11 Travel - The contractor will furnish all necessary transportation. Except as may otherwise be provided in this contract, all travel will be at the contractor's expense. Time of service rendered will be computed on the basis of actual duty at the worksite except for instances where personnel are required to travel in a boat to reach the worksite, in which case time of service shall start when the boat providing transportation disembarks to transport personnel to the worksite. If Air Travel is necessary to perform job duties, travel expenses will be negotiated prior to travel and in accordance with the

FTR.

C.1.12 Insurance Requirements – The Contractor shall procure and maintain during the entire period of their performance under this contract the following minimum insurance:

a. Employer’s Liability Insurance. The Contractor shall furnish evidence of Employer’s Liability Insurance in an amount of not less than $100,000.00.

b. General Liability Insurance. Bodily liability insurance in the minimum limits of $500,000.00 per occurrence on the comprehensive form of policy.

c. Automobile Liability Insurance. Minimum limits are $200,000.00 per person, $500,000.00 per occurrence for bodily injury and $20,000.00 per accident for property damage. This insurance shall cover the operation of all automobiles used in performance of the contract. All vehicles to be used in performance of this contract shall be expressly designated in the insurance policy. A copy of the list of such vehicles shall be submitted to the Contracting Officer. In the event that the contractor acquires a new vehicle for use on this contract after his insurance policy has been obtained, he shall immediately amend his policy to reflect the inclusion of the new vehicle on the policy. In no event shall the contractor drive a vehicle on the Government installation or construction work site without first obtaining the required coverage for said vehicle.

C.1.13 Government Quality Assurance Surveillance Plan

a. Purpose.

The purpose of the Quality Assurance Surveillance Plan (QASP) is to identify the methods and procedures the government will use to evaluate contractor performance. These methods and procedures are designed to ensure contract standards detailed in this section of the contract are achieved.

b. Objective.

This QASP has been developed by the requiring activity to ensure that Construction Management (CM) services are performed in a timely and accurate manner to support the New Orleans District Construction Division.·

c. Roles and Responsibilities:

1. Contracting Officer Representative (COR): The COR is charged with implementing this plan and ensuring successful contractor performance.

2. Contracting Officer: The Contracting Officer will take action when the COR identifies non-conforming CM services by the contractor.

d. Methods of Surveillance.

The COR and his representatives distribute work and verify attendance. Also, contractor's QA personnel complete daily reports documenting all QA activities.

In addition, Quality Assurance Personnel in Construction Division will perform surveillance of contractor's field activities.

Details of these inspections are provided to the COR and his representatives as needed.

e. Performance Requirements Summary:

All contractor activities meet established CM standards, including compliance with Construction Division Operating Manual (CDOM), Quality Assurance Plans, BCOES processes, ASTM standards. etc.

C.2 TECHNICAL SPECIFICATIONS

C.2.1 Technical Publications - All work performed under this contract shall be in accordance with the following publications. These publications, with the exception of the ASTM which needs to be purchased separately, will be provided electronically. The contractor's personnel shall be familiar with, comply with, and enforce the provisions of the following:

a. Corps of Engineers Manual EM 385-1-1 - Safety and Health Requirements Manual.

b. Corps of Engineers, Labor Relations Manual ER 1180-1-8.

c. Quality Assurance Representatives Guide EP 415-1-261, Volumes 1 through 4.

d. Department of the Army, Engineering Regulation ER 1180-1-6, 30 September 1995 - Construction Quality Management.

e. Corps of Engineers, ER 1110-1-261, Quality Assurance of Laboratory Testing Procedures.

f. ASTM E 329-06a, Agencies Engaged in the Construction Inspection and/or Testing.

g. All applicable processes in the USACE Quality Management System

(QMS)

h. New Orleans Construction Control Manual (NOCCM)

C.2.2 Technical Discrepancies - When construction contract plans and specifications (applicable for construction work to which construction personnel are assigned) are in conflict with the publications listed in C-

2.1 above, then the construction contract plans and specifications shall govern. When there appears to be a discrepancy between two or more construction contract specifications, in the construction contract plans, http://www.usace.army.mil/inet/usace-docs/eng-regs/er1110-1-261/entire.pdf http://www.usace.army.mil/inet/usace-docs/eng-regs/er1110-1-261/entire.pdf http://www.usace.army.mil/inet/usace-docs/eng-regs/er1110-1-261/entire.pdf http://www.astm.org/cgi-bin/SoftCart.exe/DATABASE.CART/PAGES/E329.htm?L%2Bmystore%2Bufda6421 http://www.astm.org/cgi-bin/SoftCart.exe/DATABASE.CART/PAGES/E329.htm?L%2Bmystore%2Bufda6421 http://www.astm.org/cgi-bin/SoftCart.exe/DATABASE.CART/PAGES/E329.htm?L%2Bmystore%2Bufda6421 between any other regulations applicable to the construction contracts, or when there appears to be an ambiguity in any of these documents, then the construction quality assurance personnel shall appeal to the Contracting Officer's Representative to resolve discrepancies or ambiguities.

C.3 PERSONNEL

C.3.1 Personnel Requirements

C.3.1.1 General Qualifications - All personnel must be duly qualified and experienced to perform the type of required services in accordance with applicable Government regulations, policies, and standard operating procedures including, but not limited to that set forth in publications listed in Section C.2, TECHNICAL SPECIFICATIONS. The Contractor shall also be responsible for providing and maintaining a fully trained staff knowledgeable in compliance of all federal, state and local regulations applicable to Title VII and the Civil Rights Act of 1964, as amended. All personnel will be required to sign a procurement integrity form provided by the Government. The determination of whether personnel are duly qualified and experienced or whether the Contractor's work is unsatisfactory will be made by the Contracting Officer or the Authorized Representatives.

Personnel who are determined to be not qualified and/or experienced, or who do not perform the required services in accordance with the provisions herein, or who compromise or jeopardize the Government's position in any way, shall be replaced immediately by the Contractor at their (the Contractor's) expense. Correction of work or reimbursement to the Government by the Contractor shall be as set forth in C.3.4 - Unsatisfactory Work. Contract employees shall be thoroughly familiar with the construction phases of the respective work to which they are assigned. A Contractor employee may perform work on any construction project wherein he/she meets the minimum qualifications for the level required, which will be determined by the Contracting Officer's Representative.

C.3.1.2 Specific Qualifications - The Contract employee must, at a minimum, have had experience and training described below: (Applicable education may be substituted for experience).

Position Description

Equiv Gov’t Pay Grade

Spec Exp Yrs

Gen Exp Yrs

Total Yrs

USACE

Safety Trng Req’d

CQM

Trng Req’d

Deg Req’d

Const QAR II GS-06 2 2 4 Yes Yes HS Const QAR III GS-07 3 2 5 Yes Yes HS Const QAR V GS-09 4 3 7 Yes Yes HS Sprv Const Rep GS-11 6 3 9 Yes Yes HS Const Manager GS-12 3 3 6 Yes Yes BS(eng or construction management)

Quality Assurance Manager

GS-12 3 3 6 Yes No BS(Science or eng)

Project Engineer GS-11 2 3 5 Yes Yes BS (eng) Senior Engineer GS-12 5 3 8 Yes Yes BS (eng) Cost Estimator GS-11 3 2 5 Yes No HS Scheduler GS-12 3 3 6 Yes No BS Expert Scheduler GS-13 5 3 8 Yes No BS

Program Analyst GS-11 3 2 5 Yes No BS Secretary GS-05 0 3 3 Yes No HS Civil Engr Tech I GS-09 3 3 6 Yes No HS Civil Engr Tech II GS-11 5 3 8 Yes No HS

The specialized experience shall be limited to experience in concrete and earthwork placement, structural, electrical, mechanical, dredging, revetment, and emergency repairs, as deemed applicable by the Contracting Officer or Authorized Representative. Typical duties of Government Personnel who perform quality assurance and other construction duties are set forth in job descriptions and are available for review at the U. S. Army Engineer District, New Orleans. All assigned Contract employees must comply with the education levels listed above. If an education requirement is not listed, the employee must be a high school graduate. All employees shall comply with the training requirements of C.3.1.5 prior to being qualified at the position required by the Contracting Officer or the Authorized Representative. With approval, QAR III's will be permitted to work at the next lower level until the training requirements of C.3.1.5 are met in full.

Personnel classified as a Scheduler should have experience with Primavera and scheduling in the fields of heavy civil and marine construction. An Expert Scheduler should have experience in construction contract claim scheduling.

Personnel classified as program analysts should have experience in contract funds management and programming.

Personnel classified as Civil Engineering Technician I must be capable of assisting the Civil Engineer in application of principles, methods, and techniques of civil engineering technology, reviewing project specifications and conferring with the Civil Engineer concerning assistance required, such as plan preparation, acceptance testing, evaluation of field conditions, design changes, modifications, cost estimates and reports. The Civil Engineering Technician reviews survey notes, field computations and contract quantity computations. This work involves performing duties such as calculating dimensions, profile specifications, and quantities of materials using calculator or software programs. This technician shall develop a working knowledge of software programs utilized to develop modification packages.

Personnel assigned as Civil Engineering Technician II must be capable of assisting the Civil Engineer in application of principles, methods, and techniques of civil engineering technology, reviewing project specifications and conferring with the Civil Engineer concerning assistance required, such as plan preparation, acceptance testing, evaluation of field conditions, design changes, modifications, cost estimates and reports. The Civil Engineering Technician reviews survey notes, field computations and contract quantity computations. This work involves performing duties such as calculating dimensions, profile specifications, and quantities of materials using calculator or software programs. This technician shall develop a working knowledge of software programs utilized to develop modification packages. This technician shall be proficient in the file management program PROJECTWISE or similar and PRIMAVERA or similar software programs. In addition, this technician should have the knowledge and experience with reading and interpreting construction schedules and sequencing.

C.3.1.3 Acceptance of Personnel - The contractor shall be responsible for furnishing personnel who meet the minimum qualifications as per Section C of the contract and for the requirements level as determined by the Contracting Officer's Representative for each work assignment. The Contractor shall furnish a resume of experience and qualifications for each employee he proposes to furnish under this contract prior to any work being performed by each respective person. Each employee proposed will be evaluated by the Quality Assurance Branch of Construction Division to determine his/her respective highest qualification level. Resumes should, at a minimum, document education level, relevant work experience with start and stop dates and references. Resumes should be mailed to the address given in Section D or emailed to the Contract coordinator, except that attention should be indicated for Chief, Quality Assurance Branch, Construction Division. For the services required at the beginning of the contract period, the contractor shall only submit for review and acceptance the resumes of individuals which were included in the contractor's proposal. Substitutions will only be allowed with acceptance from the Contracting Officer or Authorized Representative.

C.3.1.4 Exceptions - When the Contracting Officer or Authorized Representative determines that services are required which, due to exigency, do not allow sufficient time for acceptance of suitable personnel as indicated in para. C.3.1.3, the Contractor will be allowed to commence work pending said acceptance. The allowance by the Government for the Contractor to perform services pending acceptance of personnel as per para.

C.3.1.3 shall not constitute waiver of the qualifications provisions of Section C of the contract. Further, payment by the Government to the Contractor for services satisfactorily performed, prior to acceptance, shall not constitute agreement of personnel who performed said services.

C.3.1.5 Training – The following training is required for all Senior Engineers, Project Engineers, Construction Managers, Supervisory Construction Representatives and Quality Assurance Representatives. Training of these employees is the responsibility of the Contractor and each individual employee. As such the Contractor and his employee will bear all cost for training. The training requirements of this paragraph shall not be performed during contract work hours, whether straight time, overtime, or holiday time.

a. OSHA 30 hr Safety – All QAR’s must have successfully…