Attch 3- Industry Questions and Government Answers.pdf
PDF 112 KB Posted
- Attached to
- Laurel Power Plant Brake Rotor Segments
- Solicitation number
- W912P526QA012
About this file
This is a Questions and Answers (Q&A) document from a federal contract solicitation regarding brake segment manufacturing specifications.
The document addresses two inquiries concerning edge finishing requirements for a brake segment component. Question 1 asks whether laser-cut edges are acceptable for the top and bottom surfaces (radial and dish areas), or if milling and/or grinding is required. Question 2 inquires about edge finish specifications for the side surfaces, specifically whether milling, laser cutting, or grinding is mandated. Both questions receive identical answers: the contractor has discretion in selecting the cutting edge method, provided that a sample brake segment will be made available during the scope of work to verify precision and compatibility. The document includes a technical drawing showing the brake segment component with dimensional annotations and color-coded highlighting indicating the areas in question.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Question 1:
On the top and bottom (referred to as radial and dish highlighted in yellow), would a laser cut edge work, or does this need to be milled and/or ground?
Answer 1:
The cutting edge is up to the discretion of the contractor. Per scope of work, a sample brake segment will be made available for precision and compatibility.
Question 2:
On the sides (highlighted blue) is there a specification for edge finish i.e., milled, laser, ground?
Answer 2:
The cutting edge is up to the discretion of the contractor. Per scope of work, a sample brake segment will be made available for precision and compatibility.
File details come from the government source that posted it. Updated .