B 08 - Combo - 834 ASB Lodging and Meals v2.pdf

Synopsis and Solicitation Minnesota Army National Guard

Contracting Office Address: Subject/Title: Issue Date:

USP&FO - Camp Ripley 15000 Hwy 115

Little Falls, MN 56345

Lodging & Meals for B Co, 834 ASB during Annual

Training at TASMG, Springfield, MO

8 April 2026

DESCRIPTION:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

This announcement is being issued as REQUEST FOR QUOTE and constitutes the only solicitation; quotes are being requested. This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular, FAC 2023-04.

Solicitation Number: W912LM-26-Q-A006 Closing Response Date: 24 April 2026 Closing Response Time: 1:00 PM CDT Anticipated Award Date: 7 May 2026 Product or Service Code: 8910

NAICS: 722310

Set-aside Status: 100% SB Size Standard: $47,000,000 Inspection/Acceptance: Government, 7 days FOB: Destination

Delivery Address:

MO Army Service Depot c/o MN ARNG 5250 W Depot Rd Springfield, MO 65801

CONTRACT/ADMINISTRATIVE POINT OF CONTACT:

Name: Phone: Email:

Mr. Dan Bart 320-616-6012 daniel.g.bart.civ@army.mil

LINE ITEMS:

The Minnesota Army and Air National Guard has a requirement for the below line items and anticipates issuing a FIRM FIXED PRICE order.

CLIN/Line Item Number:

QTY: Unit of Issue:

Description:

0001 378 EA

Lodging, Hot Breakfast, and Meeting Room

Local per diem rates apply - cannot exceed $110.00 per room per night.

Total of 27 rooms for 14 nights is 378 room nights.

MUST SEE Statement of Work (SOW) and all attachments for full details and requirements.

0002 663 EA

Lunch Meals

MUST SEE Statement of Work

0003 714 EA

Dinner Meals

MUST SEE Statement of Work

PREPARING AND SUBMITTING QUOTE:

Response is encouraged to include past performance information: other military, commercial, and civilian companies with whom you have done business. Include country of manufacture for all items. Include feasible delivery dates.

All questions and quotes must be directed to above point of contact. Questions asked within 1 week of solicitation close will be answered at the discretion of the Contracting Office. Emailed quotes are preferred. Late quotes may be rejected at the Contracting Officer’s discretion.

Please make quotes good 60 days.

EVALUATION:

The Government plans to award a contract resulting from this solicitation to the offer conforming to the solicitation which will be most advantageous to the Government. Quotes will be evaluated using price, technical, and past performance, all being considered equal. All solicitation specifications are not absolute, and the Minnesota Army and Air National Guard will consider innovative solutions to this requirement.

THE GOVERNMENT INTENDS TO ISSUE ONE (1) CONTRACT BUT RESERVES THE RIGHT

TO CONSIDER PARTIAL OR MULTIPLE AWARDS.

If not already registered in SAM, go to https://sam.gov/SAM/ to register prior to submitting quote. At the time of evaluation of your quote/bid/proposal, your company must have an active status in SAM.gov.

https://sam.gov/SAM/

STATEMENT OF WORK (SOW)

FOR

Lodging and Meals

B Co 834 ASB Annual Training 30 May - 13 June 2026 at the TASMG in Springfield, MO

1. GENERAL. The Minnesota Army National Guard’s (MN ARNG) B Co Det1, 834th ASB has a requirement for Lodging, hot Breakfast, and Meeting Room, and both Lunch and Dinner Meals to be prepared and delivered daily 30 May through 13 June 2026, in support of their annual training. Contractor will provide rooms, and meals in accordance with minimum requirements, as outlined below. Unit to confirm final numbers by 4:00pm CDT on 18 May 2026.

2. LODGING AND MEETING ROOM.

a. Hotel rooms available consecutively 30 May - 13 June 2026 (14 nights) as outlined:

i. 25 Double Rooms (2 double or queen beds)

ii. 2 Single Rooms (1 queen or king bed preferred, but a 2-bed room will work)

iii. Local per diem rates apply (Cannot exceed $110.00 per night)

iv. Exempt from Federal and State taxes

v. Local taxes may apply

b. Hotel must be located within 15 miles of the Theater Aviation Sustainment Maintenance Group (TASMG), 5250 W Depot RD, Springfield, MO 65803.

c. Hot on-site breakfast to be provided daily from at least 6:00-7:00am

d. Hotel to provide a Large Meeting Room designated for exclusive use by about 51 Soldiers, with tables and chairs, like a large conference room or small ballroom, so to conduct business and training, and to serve and eat meals during their stay.

e. All rooms must have doors that open into a finished area; motel-style buildings are not acceptable.

f. Ability to adjust room quantity without penalty. Unit will confirm all final numbers no later than 4:00pm CDT on 18 May 2026.

g. All Soldiers must be able to retain same room for all nights.

h. On-site parking to be available for no additional charge.

i. Washers and Dryers to be available and operable for personal laundry (coin/pay ok).

j. Standard housekeeping to be included.

k. Must have Free Wireless internet connectivity.

l. Multiple locations can be considered and may be found acceptable to meet the requirement at the Government’s digression.

m. All allowable taxes and fees must be included in the pricing per room which will be provided as part of the solicitation quote response.

n. The Government is only responsible for the cost of the room. Any additional charges to the room are the responsibility of the individual occupying the room.

3. MEALS.

a. SERVING LINE SET-UP.

i. All meals will be set up in buffet-style serving lines. The Contractor, along with the Unit Food Service NCO (or unit’s designated personnel) will set up a serving line to accommodate the headcount and meal period designated. Typically only one serving line is required. However, in cases of unusually large headcount, two serving lines may be requested. Contractor along with the Unit Food Service NCO (or unit’s designated personnel) will have serving line(s) set up in the designated location and the Unit Food Services NCO (or unit’s designated personnel) must be ready to serve by the beginning of the specified mealtimes.

The location will typically be available for Contractor to set up approximately 30 minutes prior to mealtime.

ii. Contractor personnel will assess food temperatures immediately upon delivery to ensure hot item temperatures are at 135 degrees Fahrenheit or above, and cold item temperatures are at 41 degrees Fahrenheit or below. The Unit Food Service NCO (or unit’s designated personnel) will be present to verify, document, and log the food temperatures at the time the Contractor assesses the temperatures. The Unit Food Service NCO (or unit’s designated personnel) will ensure food on the serving line is replenished throughout the meal period. The Unit Food Service NCO (or unit’s designated personnel) will ensure the serving line is maintained in a clean and sanitary condition throughout the meal period and is responsible for cleaning the serving line at the conclusion of the meal period. The Unit Food Service NCO (or unit’s designated personnel) is responsible for the set-up and tear-down of the dining area, for serving the meals and beverages in the appropriate portion sizes, and for cleaning the dining area.

b. GOVERNMENT FURNISHED EQUIPMENT. The Government will not provide equipment or appliances for Contractor use.

c. CONTRACTOR FURNISHED SUPPLIES AND EQUIPMENT. The Contractor shall provide all containers, dispensers and serving utensils required for serving meals; and disposable 12” dinner plates, bowls, cups, napkins, and eating utensils in a quantity appropriate for the specified headcount. The Contractor shall provide all equipment and materials necessary for the preparation, storage, serving, and removal of food.

The Contractor shall provide the storage, heating, and cooling sources to maintain food at appropriate temperatures as necessary.

d. MEAL TIMES AND LOCATIONS. Meal serving times and locations for this requirement are as follows:

i. Locations:

• Lunch (except weekends) - Missouri ARNG Aviation Classification &

Repair Activity Depot (AVCRAD), 5250 W Depot Rd, Springfield, MO

• Dinner (and weekend Lunch meals) – at the Lodging location

ii. Meal Times:

• 31 May - 12 June – Lunch Meal: 11:00am-12:00pm

• 30 May - 12 June – Dinner Meal: 5:00-6:00pm

iii. Meal Counts:

• 31 May - 12 June – Lunch: 51 Each, 13 Days = 663 Meals

• 30 May - 12 June – Dinner: 51 Each, 14 Days = 714 Meals

e. CONTRACTOR PERSONNEL. The Contractor shall furnish enough personnel to assist in the set-up of buffet-style serving lines prior to the meal serving periods.

Contractor personnel will not serve the food.

i. Employee status and appearance. The Contractor shall ensure all personnel who are present and assisting with the food delivery and setup maintain professional appearance in accordance AR 30-22, TB MED 530, FDA Food Code, and Local Codes (Missouri). See applicable guidelines and regulations with links at bottom of this SOW.

f. FOOD SAFETY REQUIREMENTS. The Contractor shall deliver all food in insulated containers adequate to maintain proper temperatures for the entire meal period. The Contractor shall deliver food in a clean, covered vehicle. Food will be maintained at safe temperatures, in accordance with Army Technical Bulletin Medical (TB Med) 530, Tri Service Food Code. At a minimum, hot items will be maintained at 135 degrees Fahrenheit or above and cold items will be maintained at 41 degrees Fahrenheit or below throughout the set-up and serving period. Contractor shall provide food thermometers to leave on-site for the Unit Food Service NCO (or unit’s designated personnel) to monitor food temperatures throughout the meal period. Contractor shall also provide instructions for each meal provided. Instructions will include the temperature range each meal item is to be served at, serving sizes for each item. All involved parties will comply with all National Food Code, ServSafe, and other applicable federal/state/local health guidelines. In cases where TB Med 530 and the Food Code differ, the more stringent requirement will apply.

g. MENUS. The Government provided the sample menus, attached, to include entree, starch, vegetable, bread, dessert, salad, and beverages. The Contractor may propose deviations (substitutions) of menu items only if they meet the conditions identified in section “h - Deviations” below. The Contractor shall prepare meals to at least the minimum standards of the Index of Recipes Armed Forces Recipe Service and provide an adequate quantity of food to serve the anticipated headcount following serving/portion sizes identified in the Human Performance Resources by CHAMP (HPRC) website. The Armed Forces Recipes can be found at:

https://www.hprc-online.org/nutrition/go-green/food/recipes

h. DEVIATIONS. Contractor may suggest deviations from the proposed menus only in accordance with the deviation allowances identified below. All requested deviations will be submitted with the Contractor’s quotation and will be routed through the Contracting Officer for written approval of the State Food Program Manager. Approved deviations will be incorporated into the contract/purchase order. Once the contract/purchase order has been issued, no further deviations or substitutions are authorized.

i. DEVIATION ALLOWANCES.

• ENTREE. A deviation of an Entree item in different preparation styles may be considered. For example, meatballs may be proposed for meatloaf, or beef stroganoff for beef stew.

• STARCH. A deviation of a starch item in different preparation style may be considered. For example, mashed potatoes may be proposed as a substitute for scalloped potatoes, French fries, or another potato dish.

Pasta or rice may not be proposed as a substitute for potatoes.

• VEGETABLE. A deviation of a vegetable of a different type that is complementary to the main entrée may be considered. For example, corn, beans or broccoli may be proposed as a substitute for green beans. A fruit or starch may not be proposed as a substitute for a vegetable.

• SALAD. No deviations will be considered.

• BREAD. A deviation of bread of a different type may be considered. For example, dinner rolls may be proposed as a substitute for sliced bread.

However, if Garlic Bread is specified in the menu, it may not be substituted with another type of bread.

• DESSERT. A deviation of a dessert of a different type may be considered. For example, carrot cake or white cake may be proposed as a substitute for chocolate cake. However, fruit, cookies, Jell-O™, or cinnamon rolls may not be proposed as a substitute for cake.

• BEVERAGE. Deviations are considered for juice and mix-based drinks

(lemonade). No deviations will be considered for coffee and milk.

• Deviations will be reviewed separately for each catered meal requirement. Contractors will not assume that a deviation that is approved for one contract/purchase order will be approved in subsequent contracts/orders.

i. CONDIMENTS. The Contractor shall provide individual portions of condiments (salt, pepper, barbeque sauce, mayonnaise, mustard, ketchup, salad dressing, butter, and etc.) appropriate for the meal being served. Condiments will be individually packaged.

j. HEADCOUNT (QUANTITY). Currently planning for 51 Soldiers. Unit will confirm all final numbers no later than 4:00pm CDT on 18 May 2026. See attached menus.

i. HEADCOUNT DOCUMENTATION. Headcount documentation will be verified by the Unit Food Service NCO (or unit’s designated personnel) utilizing DA Form 3032. The Contractor may, at their own expense, stay to conduct their own headcount. The Contracting Officer will investigate any discrepancies between the number of meals provided and the number of meals requested. The AFMIS Closing Report, which will reflect the total Soldiers fed per meal, will be completed by the Unit, and the Unit will upload to the Invoice in Wide Area Work Flow (WAWF) during the acceptance process. The Contractor will still initiate by submitting Invoice in WAWF per instructions in DFARS clause 252.232-7006.

ii. EXCESS FOOD.

• If the actual headcount is lower than the quantity of meals ordered, the

Contractor shall allow seconds until all food is consumed up to the contracted number of meals. Any food remaining after all soldiers have eaten will remain on site and will not be removed. Unit will be responsible for disposal.

• The Contractor shall not impose a penalty upon the Government for food not consumed by attendees, providing the Government gives proper headcount to the Contractor by the date specified above.

k. APPLICABLE GUIDELINES/REGULATIONS. The following guidelines and/or regulations are applicable to this requirement.

Title / URL

AR 30-22, Army Food Program:

https://armypubs.army.mil/ProductMaps/PubForm/Details.aspx?PUB_ID=1004219

TB MED 530:

https://armypubs.army.mil/ProductMaps/PubForm/Details.aspx?PUB_ID=1006236

FDA Food Code:

https://www.fda.gov/food/fda-food-code/food-code-2022

Local Codes, (Missouri Food Code):

https://health.mo.gov/safety/foodsafety/industryfoods/retailfoods/authority.php https://armypubs.army.mil/ProductMaps/PubForm/Details.aspx?PUB_ID=1004219 https://armypubs.army.mil/ProductMaps/PubForm/Details.aspx?PUB_ID=1006236 https://usg01.safelinks.protection.office365.us/?url=https%3A%2F%2Fwww.fda.gov%2Ffood%2Ffda-food-code%2Ffood-code-2022&data=05%7C02%7Cdaniel.g.bart.civ%40army.mil%7C2f84e45a70224a935f3208de90216bfc%7Cfae6d70f954b481192b60530d6f84c43%7C0%7C0%7C639106670367601849%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=NRCN5Y0KTnAxWZcYWPsO957mzFtJBXgm4la1gCdR8wc%3D&reserved=0 https://health.mo.gov/safety/foodsafety/industryfoods/retailfoods/authority.php

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

2017-01

52.204-13 System for Award Management- Maintenance. (Deviation 2026- O0038)

2026-02

52.212-4 Terms and Conditions- Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-02

52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026- O0038)

2026-02

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038)

2026-02

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.

2024-05

52.229-12 Tax on Certain Foreign Procurements.

2021-02

52.232-33 Payment by Electronic Funds Transfer-System for Award Management.

2018-10

52.233-3 Protest after Award. (Deviation 2026-02

2026-O0038)

52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026- O0038)

2026-02

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09

252.203-7002 Requirement to Inform Employees of Whistleblower Rights.

2022-12

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

2024-05

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

2023-01

252.223-7008 Prohibition of Hexavalent Chromium.

2023-01

252.225-7001 Buy American and Balance of Payments Program.

2024-02

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12

252.232-7010 Levies on Contract Payments. 2006-12

252.247-7023 Transportation of Supplies by Sea.

2024-10

DFARS Clauses Incorporated by Full Text

Number Title Effective Date

Alternate Deviation

Variation Effective Date

252.211-7003 Item Unique Identification and Valuation.

2023-01

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number);

and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number;

DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.

S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ____, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions.

2023-01

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause--

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area Work Flow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(b) . The WAWF system provides the method to electronically process vendor paymentElectronic invoicing requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.

sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

Invoice and Receiving Report (COMBO)

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC Block #18a https://www.acquisition.gov/dfars/part-252-solicitation-provisions-and-contract-clauses#DFARS_252.232-7003 https://www.acquisition.gov/dfars/part-252-solicitation-provisions-and-contract-clauses#DFARS_252.232-7003 https://www.acquisition.gov/dfars/part-252-solicitation-provisions-and-contract-clauses#DFARS_252.232-7003

Issue By DoDAAC Block #9

Admin DoDAAC** Block #9

Inspect By DoDAAC N/A

Ship To Code Block #15

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) Block #15

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to thePayment request.

type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable. DO NOT invoice for a line item that is $0.00 or labeled "Not Separately Priced".

If submitting the for the contract, the Contractor shall check the box marking the invoice last invoice FINAL, thus initiating close out procedures and eliminating additional steps for the Contractor. , doing so will close out the NOTE contract. If you still have invoices pending submission, then DO NOT check the Final Invoice box.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

ng.mn.mnarng.list.j8-wawf@army.mil

(2) Contact the WAWF helpdesk at 866-618-5988 if assistance is needed.

(End of clause) mailto:ng.mn.mnarng.list.j8-wawf@army.mil

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

FAR Clauses Incorporated by Full Text

Number Title Effective Date

Alternate Deviation

Variation Effective Date

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.

(DEVIATION 2025-O0003 and 2025-O0004)

2025-03 Deviation 2025- O0004

2025-03

Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

[ ] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

[ ] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C.

3509)).

[ ] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[ ] (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

[ ] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

[ ] (6) [Reserved].

[ ] (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[ ] (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

[ ] (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

[ ] (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115-390, title II).

[ ] (11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title II).

[ ] (ii) Alternate I (Dec 2023) of 52.204-30.

[ ] (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) (31 U.S.C.

6101 note).

[ ] (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

[ ] (14) [Reserved].

[ ] (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C.

657a).

[ ] (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.

C. 657a).

[ ] (17) [Reserved]

[ ] (18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-6.

[ ] (19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-7.

[ ] (20) 52.219-8, Utilization of Small Business Concerns (Jan 2025)(15 U.S.C. 637(d)(2) and (3)).

[ ] (21)

(i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (Nov 2016) of 52.219-9.

[ ] (iii) Alternate II (Nov 2016) of 52.219-9.

[ ] (iv) Alternate III (Jun 2020) of 52.219-9.

[ ] (v) Alternate IV (Jan 2025) of 52.219-9.

[ ] (22)

(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-13.

[ ] (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

[ ] (24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F) (i)).

[ ] (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran- Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

[ ] (26)

(i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan 2025) (15 U.S.C. 632 (a)(2)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-28.

[ ] (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically

Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

[ ] (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

[ ] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.

C. 644(r)).

[ ] (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

[ ] (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

[ ] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2025)(E.O.

13126).

[ ] (33) [Reserved]

[ ] (34) [Reserved]

[ ] (35)

(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (ii) Alternate I (Jul 2014) of 52.222-35.

[ ] (36)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

[ ] (ii) Alternate I (Jul 2014) of 52.222-36.

[ ] (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

[ ] (39)

(i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O.

13627).

[ ] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (40) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

[ ] (41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (44) 52.223-20, Aerosols (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (45) 52.223-21, Foams (May 2024) (42 U.S.C. 7671, et seq.).

[ ] (46) 52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

[ ] (47)

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

[ ] (ii) Alternate I (Jan 2017) of 52.224-3.

[ ] (48)

(i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[ ] (ii) Alternate I (Oct 2022) of 52.225-1.

[ ] (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C.

3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109- 169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] (ii) Alternate I [Reserved].

[ ] (iii) Alternate II (Jan 2025) of 52.225-3.

[ ] (iv) Alternate III (Feb 2024) of 52.225-3.

[ ] (v) Alternate IV (Oct 2022) of 52.225-3.

[ ] (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[ ] (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

[ ] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

[ ] (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O. 13513).

[ ] (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

[ ] (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[ ] (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[ ] (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332).

[ ] (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[ ] (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[ ] (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[ ] (63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub.

L. 118-31, 41 U.S.C. 3901 note prec.).

[ ] (64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d) (13)).

[ ] (65)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.

S.C. 55305 and 10 U.S.C. 2631).

[ ] (ii) Alternate I (Apr 2003) of 52.247-64.

[ ] (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

[ ] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

[ ] (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[ ] (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

[ ] (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

[ ] (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

[ ] (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

[ ] (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

[ ] (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

[ ] (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.

S.C. 1792).

[ ] (10) 52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (Jan 2025) (49 U.S.C. 40118(g)).

(d…