Asbestos_Flooring.pdf

EMSL Analytical, Inc.

10768 Baltimore Avenue, Beltsville, MD 20705 Phone/Fax: (301) 937-5700 / (301) 937-5701 http://www.EMSL.com beltsvillelab@emsl.com

191501371 CustomerID: CAPB25 CustomerPO: CC:575329 ProjectID:

EMSL Order:

Attn: Naomi Blalock Capital Beltway Environmental LLC PO Box 536 Columbia, MD 21045

Received: 02/06/15 8:30 AM

2731 EASTERN BLVD, MIDDLE RIVER

Fax:

Phone: (240) 988-1770

Project:

2/6/2015Analysis Date:

2/5/2015Collected:

Sample Description Appearance % Type

AsbestosNon-Asbestos

% Fibrous % Non-Fibrous

Test Report: Asbestos Analysis of Bulk Materials via EPA 600/R-93/116 Method using Polarized Light Microscopy

191501371-0001

GREEN 9X9

FLOOR TILE &

BLK. MASTIC

Green Non-Fibrous Homogeneous

Chrysotile14%Non-fibrous (other)86%

191501371-0002

GREEN 9X9

FLOOR TILE &

BLK. MASTIC

Black Non-Fibrous Homogeneous

Chrysotile6%Non-fibrous (other)94%

191501371-0003

TAN 9X9 FLOOR

TILE & BLK.

MASTIC

Blue Non-Fibrous Homogeneous

Chrysotile16%Ca Carbonate55% Non-fibrous (other)29%

191501371-0004

TAN 9X9 FLOOR

TILE & BLK.

MASTIC

Brown/Yellow Non-Fibrous Homogeneous

Chrysotile10%Cellulose8% Non-fibrous (other)82%

191501371-0005

LT. BLUE FT 9X9

& YELLOW

MASTIC TOP

LAYER

Blue None Detected Non-Fibrous Homogeneous

Ca Carbonate60% Non-fibrous (other)40%

191501371-0006

LT. BLUE FT 9X9

& YELLOW

MASTIC TOP

LAYER

Brown None Detected Non-Fibrous Homogeneous

Cellulose5% Non-fibrous (other)95%

191501371-0007

PINK 9X9 FT &

BLK. MASTIC

BOTTOM LAYER

Brown Non-Fibrous Homogeneous

Chrysotile12%Non-fibrous (other)88%

191501371-0008

PINK 9X9 FT &

BLK. MASTIC

BOTTOM LAYER

Black Fibrous Homogeneous

Chrysotile7%Non-fibrous (other)93%

1THIS IS THE LAST PAGE OF THE REPORT.Test Report PLM-7.28.9 Printed: 2/6/2015 1:57:08 PM

Joe Centifonti, Laboratory Manager or other approved signatory

Analyst(s)

EMSL maintains liability limited to cost of analysis. This report relates only to the samples reported and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. Interpretation and use of test results are the responsibility of the client. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Samples received in good condition unless otherwise noted. Estimated accuracy, precision and uncertainty data available upon request. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Reporting limit is 1% Samples analyzed by EMSL Analytical, Inc. Beltsville, MD NVLAP Lab Code 200293-0

Initial report from 02/06/2015 13:57:08

Luba Stockert (8) http://www.EMSL.com mailto:beltsvillelab@emsl.com

OrderID: 191501371