A-1_Attach_1_-_BATS_Cable_Distribution_Plan.pptx

Comm Infrastructure – NCC to BATS

3. Transition through room 111 to the conduit that traverses room 113A.

4. Transition to existing underground conduit to NEMA/junction box outside the BATS shelter.

5. Install a new conduit from NEMA/junction box to the pass through into the shelter.

6. In BATS shelter continue along beam appx 10ft a.f.f to rack location. Terminate into patch panels within a new 19” wall mounted rack.

- Qty 1 - 24 multimode LC patch panel.

- Qty 1 - 24 single mode LC patch panel.

- Qty 8 rack mounted fiber to CAT6E transceivers

1. In room 102 (Network Control Center) terminate SM and MM fiber into the existing equipment rack.

- Qty 1 - 24 multimode LC patch panel.

- Qty 1 - 24 single mode LC patch panel.

- Qty 8 rack mounted fiber to CAT6E transceivers

2. Use existing cable tray and/or install-hooks or other supporting materials to support the cable.

Comm Infrastructure – NCC to BATS image1.emf

H

V

A

C

H V

A

C

DOOR

Comm Cabling Site Plan

In Rm 102 connect SM, MM fiber and CAT6e copper into new or existing patch panels in rack 1206

Use existing cable tray and/or install J- hooks for support.

Transition to existing conduit in room 111 and thru Rm 113A.

Transition to existing underground conduit to Junction box.

Install new conduit from junction box to pass thru device

Continue along beam appx 10ft a.f.f. to terminal location. Terminate into a new patch panel within a new 19” equipment rack.

- (Qty 1) 24 port singlemode LC patch panel

- (Qty 1) 24 port multimode LC patch panel

- (Qty 1) 24 port CAT6e LC patch panel image3.png image4.png image1.png image2.png image2.png image3.png